F27
Wireless Temperature and/or Humidity
Building Automation Products, Inc. • 750 North Royal Avenue, Gays Mills, WI 54631 USA
Tel: +1-608-735-4800 • Fax: +1-608-735-4804 • Email: [email protected] • Web: www.bapihvac.com
Supply Voltage: AC Receptacle Plug-in Power Supply (provided)
Power cord 5’ cord w/ 2.5mm DC power jack
Volts 120VAC converter 5VDC@6W
Outputs:
Ethernet RJ45 Jack (10base-T)
Serial USB-B Jack (USB 2.0)
Termination:
Ethernet RJ45 CAT5e straight 5’ cable (provided)
Serial USB-B/USB-A male, 3’ cable (provided)
Antenna RP-SMA Connector
Display Indicator: One Red LED for Power & Reception
Antenna: Dipole or Whip
Enclosure Rating: NEMA 1, (IP 20)
Mounting: 35mm DIN Rail, 2.75”x4” Snaptrack or Surface w/ Tabs
Material: ABS Plastic, UL94 V-2
Color: Warm White (WMW)
Ambient: 32º to 140ºF (0º-60ºC) • 5 to 95% RH, Non-Condensing
Agency: RoHS
Software: .......................... Programs and Manual Downloads from bapihvac.com
WAM Installation doc: ..... WAM Installation and Gateway Congurator (RJ45 IP Interface)
WAM Website doc .......... Full WAM Website Instructions and User Guide
JSON Interface doc ........ JavaScript Object Notation (JSON) Gateway interface documentation
General Hex doc............. A description of the payload for each transmitter and enumerator identication
TCP IP Discover ............. IP Search Program Identies Assigned DHCP Network Address
Receiver Test .................. BAPI Wireless Receiver Test Program (accessed by USB port or RJ45 jack)
FTDI Drivers ................... USB Communication Interface
Wireless Asset Monitor (WAM) Receiver
l 100 Foot Open Reception Range
l Surface, Snaptrack or DIN Rail Mounting
l RJ45 and USB-B Communication Connections
l Local or Custom Web-based Sensor Monitoring
l Local Inteface Via JSON Protocol or ASCII Hex
The Wireless Asset Monitor (WAM) unit receives data from all BAPI
wireless 418 MHz sensor/transmitters. The receiver delivers the data
to the RJ45 Ethernet port for communication with a BAPI WAM Remote Website (see “Associated Products”
below) or to a web address of your choice. The receiver also delivers the data simultaneously to the USB port
for direct connection to the BAS via JavaScript Object Notation (JSON) protocol or ASCII Hex.
Multiple length antennas are available for ease of installation and optimal reception. The EZ mount
system allows for DIN rail, snaptrack or surface mounting.
Two software programs and USB drivers are included on a CD. The rst program identies the IP address
assigned to the WAM Receiver by the Dynamic Host Conguration Protocol (DHCP) network. The other
program runs on the user’s computer to locally monitor the wireless sensor/transmitters or to interface
with the user’s Building Automation System (BAS) equipment.
Ordering Information:
BA/RCV418-WAM-EA79-EZ
Wireless 418MHz WAM Receiver with 79” (2m) Dipole Antenna
BA/RCV418-WAM-EA180-EZ
Wireless 418MHz WAM Receiver with 180” (4.5m) Dipole Antenna
BA/RCV418-WAM-WHP-EZ
Wireless 418MHz WAM Receiver with 5” (.13m) Whip Antenna
Features & Options
Specications
418 MHz
WAM
Receiver
Rev. 10/08/13
See end of Section F for list pricing.
The WAM Remote Website
The BAPI WAM Website lets the
user monitor their
wireless sensors
from anywhere in the
world via computer,
smart phone or tab-
let. (See pg F28)
Associated Products