Long Distance Industrial Wireless Transmitters and Receivers

Long Distance Industrial Wireless

Transmitters and Receivers

W-31

UWXL-24-TC shown smaller

than actual size.

The UWXL Series industrial wireless

transmitters from OMEGA offer

unparalleled ﬂexibility for process

measurement applications. Capable

of ranges to 450 m (1500') line of

sight (LOS), the UWXL transmitters

are designed for a variety of

applications, including temperature,

infrared temperature, relative

humidity, process transducers with

standard voltage or current outputs,

as well as pH. Thermocouple

models are user-conﬁgurable for

any of 9 calibrations, while RTD

units are compatible with both

0.00385 and 0.00392 curve Pt100

sensors. UWXL transmitters are

programmable to transmit data at

intervals conﬁgurable from once

every 2 seconds to every 2 minutes.

Transmitted data includes the

process measurement along with

the ambient temperature, RF signal

strength and battery condition.

Software provided with each model

can display this information in real

time. This free software allows you

to use your PC as a multi-channel

meter, recorder or data logger; data

can also be exported to a standard

U Thermocouple, RTD,

Infrared Temperature,

RH, pH, Process Voltage/

Current and Input Models

U J, K, T, E, R, S, B, and N

Thermocouples

U 385 and 392 Pt100 RTD

Probes

U IP68 Rated Enclosure–

Dust- and Water-Tight

U Free Software Converts

Your PC Into a Multi-

Channel Chart Recorder

or Data Logger

U Compatible with

Both UWTC-REC and

UWTC-REC-NEMA

Wireless Receivers

U Long Battery Life

Typical Multi-Unit Wireless

Automation System

Process Voltage

Transmitter

Humidity

Transmitter

Thermocouple

Transmitter

Infrared

Transmitter

Up to 450 m (1500')

UWTC-REC4

receiver.

HE-XE102 PLC

(Programmable Logic Controller)

Analog Output (Wired)

Models shown smaller

than actual size.

Up to 450 m

(1500') Line of

Sight Range

IP68

Enclosure

UWXL Series

spreadsheet ﬁle.

UWXL transmitters are compatible

with a wide variety of OMEGA

wireless receivers. UWTC-REC

receivers are available with optional

analog output, alarms and display,

while the UWTC-REC-NEMA

receivers add a NEMA rated

enclosure. Receivers can accept up

to 48 transmitters. Receivers with

analog outputs can also retransmit

data through a wired connection,

as an analog voltage, current or

thermocouple signal, to interface

with a controller, PLC or data

acquisition interface.

Dust- and

Water-Tight

W-32

Accuracy @ 25°C:

Types J and K: ±0.5% rdg or ±1.0°C

(1.8°F), whichever is greater

Types T, E, and N: ±0.5% rdg or

±2.0°C (3.6°F), whichever is greater

Types R, S, B and C: ±0.5% FS

Resolution: 1°C/1°F

Sensor Connection: Screw terminals

Model UWXL-24-RTD

Input: Pt100 RTD; 0.00385 or 0.00392

curve, software selectable

Measurement Range:

Pt100, 0.00385: -200 to 850°C

(-328 to 1562°F)

Pt100, 0.00392: -100 to 457°C

(-148 to 854°F)

Accuracy: ±0.5°C (1.0°F)

Resolution: 1°C/1°F

Sensor Connection: Screw

terminals

Model UWXL-24-IR-1

Temperature Range: -18 to 538°C

(0 to 1000°F)

Accuracy: ±2% rdg or 2.2°C (4°F),

whichever is greater; @ 22°C (72°F)

ambient temperature and emissivity

≥0.95

Optical Field of View: 6:1 (distance/

spot size)

Sensor Head Cable Extension:

Up to 15 m (50’) total

Repeatability: ±1% rdg

Spectral Response: 5 to 14 microns

Response Time: 100 ms (0 to 63% of

ﬁnal value)

Emissivity: 0.1 to 1.00, adjustable

Common Speciﬁcations

Computer Interface: USB

Transmit Sample Rate: Programmable

from 2 second to 120 second

Radio Frequency (RF) Transceiver

Carrier: ISM 2.4 GHz, direct sequence

spread spectrum, (2.450 to 2.490 GHz–

12 RF channels)

RF Output Power: 18 dBm (63 mW)

Range of RF Link: Up to 450 m (1500')

outdoor line of sight; up to 90 m (300')

indoor/urban

RF Data Packet Standard: IEEE

802.15.4, open communication

architecture

Software (Included Free): Requires

Windows

2000, XP or Vista (32 bit)

operating system

Power: One 3.6V, Lithium C Cell

(included)

Battery Life (Typical): 3 years;

at 1 sample/minute reading rate @ 25°C

Operating Temperature: -10 to 70°C

(14 to 158°F)

Storage Temperature: -40 to 80°C

(-40 to 176°F)

Model UWXL-24-TC

Input: J, K, T, E, R, S, B, C or N

thermocouple, software selectable

Measurement Range:

J: -100 to 760°C (-148 to 1400°F)

K: -100 to 1260°C (-148 to 2300°F)

T: -200 to 400°C (-328 to 752°F)

E: -200 to 1000°C (-328 to 1832°F)

R: 260 to 1760°C (500 to 3200°F)

S: 260 to 1760°C (500 to 3200°F)

B: 870 to 1820°C (1598 to 3308°F)

C: 0 to 2315°C (32 to 4200°F)

N: -100 to 1260°C (-148 to 2300°F)

Operating Ambient:

Sensor Head: 0 to 70°C (32 to158°F)

Sensor Head (-HT Model): 0 to 85°C

(32 to 185°F)

Sensor head with OS100-WC

(Water Cooling Jacket): 0 to 200°C

(32 to 392°F)

Relative Humidity: Less than

95% RH, non-condensing

OS100-WC Water Flow Rate:

0.25 GPM, room temperature

Thermal Shock: About 30 minute

for 25°C (77°F) abrupt ambient

temperature change

Warm-Up Period: 3 minutes

OS100-AP Air Flow Rate: 1 CFM

(0.5 L/s) (1 x 2.5")

OS100-LA Laser Sight

Accessory

Wavelength (Color): 630 to 670 nm (red)

Operating Distance (Laser Dot):

Up to 9.1 m (30')

Max Output Optical Power: Less

than 1 mW @ -6°C (22°F) ambient

temperature

European Classiﬁcation: Class 2,

EN60825-1/11.2001

Max Operating Current: 45 mA

@ 3 Vdc

FDA Classiﬁcation: Complies with

21 CFR 1040.10, Class II laser product

Beam Diameter: 5 mm (0.20")

Beam Divergence: <2 mrad

Operating Ambient: 0 to 50°C (32 to

122°F); <95% RH, non-condensing

Power Switch: On/off slide switch on

the battery pack

Power Indicator: Red LED

Power: Battery pack, 3 Vdc (consists

of two 1.5 Vdc “AA” lithium batteries,

included)

Thermocouple and RTD

models feature screw

terminal connections that

allow you to connect a wide

range of sensors and probes.

Models

with intergral probes

are available contact factory.

Transmitter model

UWXL-24-RH-RPI.

Temperature transmitter models

UWXL-TC-24, UWXL-RTD.

Humidity/temperature

sensor included.

UWXL-IR-1 features a remotely mounted

sensor head to measure non-contact

infrared temperature.

Infrared

sensor head

included.

UWXL-RH features a detachable

combination humidity/temperature

sensor that can be remotely mounted.

Transmitter model

UWXL-IR-1.

W-33

Model UWXL-24-PC

Input: 0 to 1 Vdc, 0 to 5 Vdc, 0 to 10 Vdc,

0 to 20 A, 4 to 20 mA

Accuracy: ±0.1% FS @ 25°C

Resolution: 12 to 15 bit

Connection: M12

Process Input model UWXL-24-PC features M12 connection

that allows you to connect a wide range sensors or

transducers that have voltage or current output.

All models shown smaller than actual size.

UWTC-REC2-D-NEMA is mounted in a water tight, Polycarbonate/

ABS IP68 rated enclosure. This unit will receive data from up to

48 transmitters and provides a local displayed reading and a

wired retransmission analog output.

Remote Antenna Kit UWXL-RAK

UWXL-RAK allows you to use a directional antenna to

maximize transmission range to your base receiver. Includes

directional antenna, 200 mm (8") antenna extension cable and

mounting bracket.

UWXL-PC Transmitter.

UWTC-REC1-NEMA Receiver.

UWTC-REC2-D-NEMA Transceiver.

Model UWXL-24-RH

Temperature

Range: -17 to 49°C (2 to 120°F)

Accuracy: ±1°C (±1.8°F) @ 25°C

Resolution: 1°C/1°F

Relative Humidity

Range: 2 to 98% RH

Accuracy: ±2.5% RH from 20 to

80% RH; ±3.5% RH <20 and

>80% RH @ 25°C (76°F)

Resolution: 1% RH

UWTC-REC1-NEMA is mounted in a water tight, Polycarbonate/

ABS IP68 rated enclosure. This unit will receive data from up to

48 transmitters and is powered directly by the USB connection

on your computer (no analog output provided).

Antenna

Stand

Cable

Model UWXL-24-PH

pH Input:

Range: 0 to 14 pH

Accuracy: ±0.1 pH @ 25°C

Resolution: 0.01 pH

Response Time: 2 s

Input Connection: BNC

Temperature Compensation:

Automatic, 0 to 100°C (32 to 212°F)

RTD Temperature Input:

Type: Pt100 Ω RTD, 0.00385 curve

Range: 0 to 100°C (32 to 212°F)

Accuracy: ±1°C (1.8°F)

Resolution: 0.1°

Input Connection: Screw terminals

Connect a Wireless Receiver to Your Computer, PLC or

Data Logger to Form a Complete Wireless System!

W-34

UWTC-REC1.

UWTC-REC1 will receive data

from up to 48 transmitters and

is powered directly by the USB

connection on your computer (no

analog output provided).

UWTC-REC2-D

receiver.

UWTC-REC2-D will receive data from

up to 48 transmitters. This model

provides a displayed reading and

a retransmitted, hard wired analog

output for 1 user selected transmitter

in your system. Requires DC power

adaptor (included).

UWTC-REC4 will receive data from

up to 48 transmitters. This model

provides a scalable retransmitted,

hard wired analog output for 4

user selected transmitters in your

system. Requires 12 to 24 Vdc

power supply.

UWTC-REC4

receiver.

UWTC-REC3

32-channel receiver

with ethernet.

Typical Multi-Unit Wireless Data Logging System

Thermocouple

Transmitter

Process Voltage

Transmitter

Humidity

Transmitter

Infrared

Transmitter

UWTC-REC1

USB receiver

Up to 450 m(1500')

Laptop not included.

UWTC-REC3 receiver/host with

ethernet is compatible with

UWTC, UWRTD, UWRH and

UWIR transmitters and connects

directly to your network or the

Internet—no PC.

Monitor up to 48 different wireless

transmitters, simultaneously on your

PC. Display shows process reading,

signal strength and batter level in

real-time.

Chart up to 48 different wireless

transmitters, simultaneously on

your PC.

Collect and log data for up to 48 different

wireless transmitters at the same time.

Record, save or download to a spread sheet

up to 32 thousand individual readings.

All models shown

smaller than actual size.

W-35

To Order

Model No. Description

UWXL-24-TC Wireless thermocouple transmitter

UWXL-24-RTD Wireless RTD (Pt100) transmitter

UWXL-24-PC Wireless process voltage and current input transmitter

UWXL-24-IR-1 Wireless infrared temperature transmitter

UWXL-24-RH-RPI Wireless humidity/temperature transmitter with remote probe

UWXL-24-PH Wireless pH/temperature transmitter

UWXL-RAK Remote antenna kit

Specify analog output “V1” for 0 to 5 Vdc; “V2” for 0 to 10 Vdc, “MA” for 4 to 20 mA or “TC” for type K thermocouple signal.

Comes complete with measurement/charting/data logging software, 3.6V lithium battery and operator’s manual. UWTC-REC2 units also include

DC power adaptor.

Ordering Examples: UWXL-24-TC, wireless thermocouple transmitter, UWTC-REC1, 48-channel USB receiver, and UWTC-BATT-C,

spare battery.

UWXL-24-IR-1, wireless infrared temperature transmitter, OS100-MB, sensor head mounting bracket, UWTC-REC4-MA, 48-channel receiver

with 4 to 20 mA analog output, and UWTC-BATT-C, spare battery.

UWXL-24-RH-RPI, wireless humidity/temperature transmitter, UWXL-24-PC, wireless process input transmitter, UWTC-REC2-D-MA

48-channel receiver with 4 to 20 mA analog output.

Model No. Description

UWTC-REC1 48-channel wireless USB powered receiver

(no analog output or alarms)

UWTC-REC2-(*) 48-channel wireless receiver with 1-channel analog

output and alarms

UWTC-REC2-D-(*) 48-channel wireless receiver with 1-channel analog output,

alarms and display

UWTC-REC3 32-channel wireless receiver/host with ethernet

(Thermocouple, RTD, RH and IR models only)

UWTC-REC4-(*) Wireless DIN-rail receiver with 4-channel analog

output, and alarms

UWTC-CB12 12-channel USB control box with 12 form “C” relays

UWTC-BATT-C Replacement battery, 3.6V, lithium “C” cell assembly

PHE-1311 Gel-ﬁlled pH electrode, general purpose

PRTF-10-2-1000-1/8-6-E-TA3F Pt1000 RTD probe,

⁄8" diameter, 6" L, with wire, 12 m (40') PFA insulated

cable with connector

OS100-MB Sensor head mounting bracket for UWXL-24-IR-1

OS100-AP Sensor head air purge collar for UWXL-24-IR-1

OS100-WC Sensor head water cool jacket, up to 200°C (392°F) for UWXL-24-IR-1

OS100-LS Laser sighting accessory for UWXL-24-IR-1

Receivers/Accessories

UWXL temperature models with integral thermocouple or

RTD probes are also available. Contact OMEGA for pricing

and availability. For the latest features and speciﬁcations

visit us online.