2024-Kia-Seltos-Vehicle-Features-Tips

The 2024 Kia Seltos.

Voice Recognition

and Bluetooth

®2

Using Voice Recognition

Improve Bluetooth

Voice Recognition (VR) performance

by making a few simple changes to your phone contacts:

• Use full names (first and last names) vs. short or single-

syllable names (“John Smith” vs. “Dad,” “Smith Residence”

vs. “Home”).

• Avoid using special characters, emojis, and hyphenated

names (@, &, #, /, -, *, +, etc.).

• Avoid using acronyms (“Emergency” vs. “ICE” or “In Case

of Emergency”) or words with all capital letters.

• Spell words completely; system will not recognize

abbreviations (“Doctor Smith” vs. “Dr. Smith”).

• Always wait for the beep before speaking any commands.

• When using VR to place a call, speak in a natural, moderate

tone, with clear pronunciation. The system may have trouble

recognizing commands if you speak too softly or too loudly.

• Open windows, sunroof, weather (wind/rain), or an A/C fan

operating at higher speeds can interfere with VR accuracy.

• Your VR system may have difficulty understanding some

accents or uncommon names.

• Press the talk button and say “Help” to get a list of available

commands.

Pairing or Connecting Your Phone with Bluetooth

• Select “Device Connections” in the infotainment system

display

or “Call” button on the steering wheel to begin the

pairing process if no phone has previously been paired.

• During the pairing process, please make sure you accept

all requests for phonebook download and future auto-

connection on your phone.

• To pair a second phone or subsequent phones, reference

the manuals and guides supplied with your Seltos as steps

vary by infotainment system.

• If you experience any issues with auto-connection,

try the following:

• Reboot your phone (turn the phone off and then on).

• Update the phone operating system to the most recently

released version.

• Delete the phone from the list of Bluetooth

devices

on the infotainment system display and delete Kia

device from the list of Bluetooth

devices on your

phone, and re-pair.

• Ensure the phone has the Bluetooth

feature activated.

• If some contacts are not downloading to the infotainment

system display, check to confirm that the contact has

been entered correctly and that it has been stored under

the categories (HOME, MOBILE, WORK, iPhone

®3

) that are

supported by the infotainment system display. Some contact

categories (MAIN, PAGER, OTHER) may not be supported. If

the number of contacts exceeds the maximum number allowed

on the infotainment system display, contacts will be partially

downloaded. Ensure that only the “phone contact list” is

selected for contact download on your phone (not social media

or email contact lists as these contacts may not download to

the infotainment system display).

• Phone operating systems change frequently and some phones

may have varying compatibility levels with the Bluetooth

system. For any questions regarding the features of your

vehicle, please contact your preferred Kia dealer or contact

Kia Consumer Assistance at 1-800-333-4542.

Other Bluetooth

Tips

• Bluetooth

reception is affected by carrier coverage and is

dependent on the phone.

• If streaming audio through Bluetooth

from a device, ensure

the listening volume on the device is turned up.

Smartphone Connectivity

Apple CarPlay

®3

Your vehicle offers you command of your compatible iPhone

when you connect through Apple CarPlay

on your

infotainment system display. This will enable you to make calls, send hands-free texts, access many of your favorite

apps and music, and get navigation help with Siri

voice control.

To connect Apple CarPlay, visit https://youtu.be/98TNWMOQfdU

Android Auto

TM4

Your vehicle allows you to connect to your compatible Android

phone via Android Auto

on your infotainment

system display. Through this feature, you can access music, your phone’s dialer, navigation help, and more with an

intuitive interface and voice commands. You can even access your phone through your steering wheel controls.

To connect Android Auto, visit https://youtu.be/sTR4KotSOzU

For select models equipped with wireless Apple CarPlay and Android Auto, visit https://youtu.be/oUXXuAZAOEI

Kia Access App*

• Your cell phone and your vehicle have to be connected to a cellular network with a good wireless signal strength

in order to use Kia Connect (formerly UVO link). If these conditions are not met, remote commands may not

execute or may take longer to execute.

• To use Remote Start or Remote Start with Climate Control feature, all doors, hood and trunk/liftgate must be

closed and locked. Remote Start or Remote Start with Climate Control feature will operate for 10 minutes, and

then the vehicle shuts off automatically.

• Activate Remote Start or Remote Start with Climate Control feature a few minutes before you plan to get into the

vehicle. This will allow vehicle interior to reach a desired temperature.

• The quickest way to obtain an accurate vehicle status is by pressing the refresh icon on your app or customer

web portal.

• In order to help preserve vehicle battery, Kia Connect will not work seven days after the ignition was last turned on.

You will need to re-start your vehicle with a key fob in order to use Kia Connect again.

Vehicle Feature Tips

Many of the Tips presented below are covered in greater detail in the

Owner’s Manual, Multimedia System Manuals, Features and Functions

Guide, and Quick-Start Guide hangtag supplied with your new vehicle.

Feature Videos

To view a video on your mobile device, snap this QR Code or visit the listed website:

https://www.youtube.com/KiaFeatureVideos

All-Wheel Drive (AWD) System*

When you select AWD LOCK Mode (indicator is illuminated) by pressing the AWD LOCK button

, the AWD LOCK Mode is designed to increase the drive power when driving on wet pavement,

snow-covered roads, and/or on unpaved roads.

This mode is used for climbing or descending sharp grades, driving on unpaved roads, driving

on sandy and muddy roads, etc., to improve traction.

When the AWD LOCK Mode is deactivated, a minor mechanical vibration may be felt as the AWD

LOCK mode is disengaged. This minor mechanical vibration is not a mechanical failure.

Rear Occupant Alert (ROA) with Door Monitoring*

The ROA with Door Monitoring utilizes the door latch inputs, rather than sensors, to help alert the

driver if the system detects that a rear passenger may still be left in the vehicle. The alert will

be a message on the Instrument Cluster stating to “Check rear seats”

and a chime will sound.

The factory default is set to OFF. To turn the system ON or OFF, go to Vehicle Settings, select

Convenience, then Rear Occupant Alert, and check/uncheck the box to enable/disable by

pressing the OK button on the steering wheel.

Multimedia USB Port, Power Outlets, and USB-C Charger Ports

Power Outlets

: Use the power outlets for mobile phones and other devices designed to

operate on a 12V (180W max.) power outlet.

Multimedia USB Port

: Use Multimedia USB port to connect USB audio devices and smartphones.

USB-C Charger Ports

: Devices can be recharged using a USB-C cable. The Engine Start/Stop

button needs to be in the ACC/ON/START position to operate the USB-C Charger Ports.

Note: Devices will only charge while the vehicle is in ACC/ON/START position.

Always use the USB charging cable that has been certified by the device manufacturer. Use of aftermarket cables is NOT recommended

as they may impact functionality. The Multimedia USB Port

in the center panel charges slower than the USB-C Charger Ports

throughout the vehicle.

Idle, Stop and Go (ISG) System*

The ISG system is designed to help reduce fuel consumption by automatically shutting down the

engine when the vehicle is at a standstill.

When the ISG system is ON, and the vehicle is at a standstill, and other operating conditions are met,

the engine will stop and the AUTO STOP indicator on the Instrument Cluster will illuminate GREEN.

The engine will restart when the brake pedal is released or the shift lever is moved from D (Drive)

to the R (Reverse) or P (Park) position, or to Manual Shift mode. When the engine restarts, the

GREEN AUTO STOP indicator on the Instrument Cluster will turn off.

To deactivate the ISG system, press the ISG OFF button

and its light will illuminate RED.

If you press it again, the system will be activated. Please see the Owner’s Manual for details.

Reminders:

• ISG is active by default at vehicle startup. When ignition is cycled, ISG will turn ON again.

• Under certain conditions, the engine will restart automatically even if the brake pedal is

still depressed.

• If the AUTO STOP indicator is continuously blinking AMBER and the ISG button LED is on,

please contact an authorized Kia dealer.

Lane Keeping Assist (LKA)

and Lane Following Assist (LFA)

LKA is designed to detect lane markings (or road edges) and can warn the driver if the vehicle

leaves the lane without using the turn signal and can assist with steering to prevent the vehicle

departing from its travel lane. LFA is designed to help ensure that the vehicle stays centered in

its lane

by monitoring the detected lane markings ahead and vehicles on the road, and may

provide steering inputs.

To enable LKA and/or LFA: Go to User Settings in the Instrument Cluster display, OR press

the Mode button

on the right side of the steering wheel, OR press the SETUP key/button

on the infotainment system. Select the VEHICLE button to enter the Vehicle Settings > Driver

Assistance > Driving Safety.

Once enabled, press and hold the Lane Safety Button

to turn LKA on or off. When ON, the

Lane Safety icon on the Instrument Cluster will illuminate WHITE while the system does not

detect the lane markers. When the system detects the lane markers and can assist the steering,

the icon will turn GREEN

To set/adjust Volume and Priority: Go to Vehicle Settings* in the infotainment system or User

Settings in the Instrument Cluster display and in Driver Assistance, press Warning Methods and

adjust the Warning Volume.

LFA Hands-Off Warning: If the driver removes their hands from the steering wheel for several seconds, a warning message will

appear on the Instrument Cluster, and an audible warning will sound. If the driver’s hands are not replaced on the steering wheel,

LFA will cancel.

LKA will operate only when these conditions are met:

• The vehicle speed exceeds approximately 40 mph.

• LKA recognizes the lane the vehicle is traveling in.

• The vehicle is between the lane markers.

LFA will operate only when these conditions are met:

• LFA recognizes both sides of the lane markers the vehicle

is traveling in.

• The vehicle is traveling slower than 120 mph.

Intelligent Speed Limit Assist (ISLA)*

ISLA is designed to use speed limit information from the navigation system to inform the driver of

the detected speed limit. When ISLA is on and active, LFA will display an alert on the Instrument

Cluster LCD of the detected speed limit

. If the vehicle’s current speed exceeds the detected

speed limit, a warning will sound and the vehicle’s current speed will blink on the LCD.

ISLA Settings:

• To access User Settings* in the Instrument Cluster

—

Press the Mode button

on the

Steering Wheel to toggle to User Settings. Press the OK button

up/down to toggle to

Driver Assistance, then Speed Limit.

• To access Vehicle Settings* in the Infotainment System

—

Press the SETUP key or the onscreen

SETUP button. Press VEHICLE to enter Vehicle Settings > Driver Assistance > Speed Limit.

Select one of the three modes:

• Speed Limit Assist: Informs the driver of the posted speed limit

and will display a message

to change the speed to help the driver stay within the posted speed limit.

• Speed Limit Warning: Informs the driver of the posted speed limit

and warns the driver

when the vehicle is traveling faster than the posted speed limit.

• Off: ISLA is disabled.

[۴ USP







(Cluster B shown)

HUD

(Buttons located in panel to the left

of steering wheel)

2.2.

(Buttons located on right side of steering wheel)

LOCK

(Located right of gear shift)

Check rear seats

Alarm O



•



'5,9(

02'(

86%

A B C

2.2.

(Buttons located on right side of steering wheel)

Forward Collision-Avoidance Assist (FCA)

FCA is designed to help alert the driver and, under certain conditions, apply emergency braking

when rapidly approaching a vehicle that is slowing down, braking, or stopped. Initially, the FCA

provides a Forward Collision Warning (FCW) when it detects a potential collision with a vehicle,

pedestrian, or cyclist in front by emitting an audible warning and a visual alert on the Instrument

Cluster

. Junction Turning function*

may apply emergency braking to help avoid a collision

with an oncoming vehicle detected in an adjacent lane when turning left at a crossroad with

the turn signal on. Adjust the alert settings (Standard, Late, Off) in either the Instrument Cluster

or audio settings. FCA is ON by default and can be turned OFF in the Vehicle Settings in the

infotainment system or Instrument Cluster settings menu.

If the system detects that the collision risk has increased, FCA can automatically apply the brakes

to reduce your speed, potentially helping to reduce the effects of a possible collision.

FCA/FCW will become active when the:

• Engine Start/Stop button is ON.

• Vehicle is traveling faster than 5 mph.

• Electronic Stability Control (ESC) is ON.

Blind-Spot Collision Warning (BCW)*

The BCW system is designed to detect approaching vehicles in the driver’s blind spot areas

and warn the driver of a possible collision with a warning indicator and a warning sound. If

there is a collision risk when exiting a parallel space, BCW can assist by applying the brakes

to help avoid a collision.

To enable/disable in User Settings* in the Instrument Cluster

—

Press the Mode button

the steering wheel and toggle to User Settings. Press the OK button

then toggle up/down

to Driver Assistance > Driving Safety > Blind-spot Safety.

To enable/disable in Vehicle Settings* in the infotainment system

—

Press the SETUP key or the

onscreen SETUP button. Press VEHICLE to enter Vehicle Settings. Select Driver Assistance >

Driving Safety > Blind-spot Safety.

Note: Only adjust settings when the vehicle is at a standstill, gear shift is in PARK, and the

ignition is ON or the Engine Start/Stop button* is in the ON position.

Vehicle detection: When another vehicle is detected within the BCW warning boundary

, an

indicator

will illuminate on the outside rearview mirrors.

Collision warning: When the vehicle detection warning is on and the driver activates a turn signal,

a flashing indicator

will illuminate on the outside rearview mirrors and the system will sound

a warning.

Collision-Avoidance Assist* (while departing): If equipped, when a collision warning has already

occurred, and the BCW detects a collision risk has increased, BCW can help avoid a collision by

applying the brakes. Your vehicle needs to be traveling less than 2 mph, and the approaching

vehicle is traveling less than 3 mph.

Rear Cross-Traf󱹕c Collision-Avoidance Assist (RCCA)*

If RCCA detects approaching vehicles from the rear-left or rear-right side of the vehicle, the

system will sound an audible warning, the warning indicators on the outside rearview mirrors

will illuminate, and a message will appear on the LCD Instrument Cluster. RCCA may activate

the Electronic Stability Control to help avoid an imminent collision. RCCA may temporarily apply

braking power when an approaching vehicle is detected within a certain distance next to or

behind the vehicle.

RCCA is designed to operate under the following conditions:

• When the gear shift is in Reverse.

• When your vehicle is moving slower than 6 mph.

Smart Cruise Control (SCC) with Stop and Go System*

The SCC with Stop and Go System is designed to maintain a speed and predetermined distance

from vehicles detected ahead by automatically adjusting the driving speed as needed. When

traffic is detected, the vehicle can slow down to maintain a set distance behind traffic without

depressing the accelerator or brake pedal.

With SCC on and activated, the vehicle-to-vehicle distance set, and when the system detects a

vehicle slowing or stopping, the system can bring the vehicle to a complete stop. When the vehicle

ahead starts to move forward, the SCC system re-engages. If the vehicle ahead stops for more than

3 seconds, the accelerator pedal or the RES+ button must be pressed to start moving the vehicle.

To set/adjust SCC speed:

• Accelerate/decelerate to the desired speed.

• Press the CRUISE button

on the steering wheel to turn the system ON. The CRUISE indicator

will illuminate on the Instrument Cluster.

• Press (SET-) button

down to set speed. The SET indicator light will illuminate. The set speed

and vehicle-to-vehicle distance will illuminate on the LCD screen.

• Press (RES+) button

up or (SET-) button

down to adjust the set speed.

To set the vehicle-to-vehicle distance

: Press the SCC button

on the steering wheel. The

image on the LCD screen

will change when scrolling through the available distance settings.

To cancel SCC operation: Press the CANCEL button

or press the brake pedal. The LCD screen

will display a message that the SCC operation is canceled.

To turn the SCC system OFF: Press the CRUISE button

The CRUISE indicator on the

Instrument Cluster will turn OFF.

Smart Liftgate with Auto Open*

The Smart Liftgate with Auto Open can open the Liftgate automatically when the driver approaches or leaves the vehicle. For Smart

Liftgate with Auto Open to operate, the Smart Key must be positioned in the detecting area (20-39 inches/50-100 cm).

The Smart Liftgate with Auto Open feature is OFF by default. To enable on certain models, go to the User Settings in the Instrument

Cluster LCD modes, then select Door > Smart Liftgate. On other models, press the SETUP key on the infotainment system, followed

by pressing Vehicle > Door > Smart Liftgate on the screen.

Automatically open: When the Smart Key is on your person and you are near the back of the vehicle, within close proximity, the

hazard lights will blink and a chime will sound for about 3 seconds as an alert that the Smart Liftgate is about to open. Then the

alert system will blink and chime two additional times before opening the Smart Liftgate.

See your Features and Function Guide for more details.

REMINDER: Above are approximate distances based

on a 56-mph vehicle speed. The SCC vehicle-to-vehicle

distance increments are based on vehicle speed.

172ft130ft

82ft

106ft

RES

SET

CNCL

–

CRUISE

RES

SET

–

CRUISE

(Buttons located on right side of steering wheel)



03+

2.2.

&ROOLVLRQ:DUQLQJ

(Junction Turning)



03+

2.2.

(Buttons located on right side of steering wheel)

2024 Seltos SX AWD shown on cover. Images or graphics for illustration only. *If equipped.

Driving while distracted can result in a loss of vehicle control that may lead to an accident, severe personal

injury, and death. The driver’s primary responsibility is in the safe and legal operation of a vehicle. Remain attentive to driving and be cautious when using steering wheel-mounted controls while driving.

Use of any handheld devices, other equipment, or vehicle systems that take the driver’s eyes, attention, and focus away from the safe operation of a vehicle or which are not permissible by law should

never be used during the operation of the vehicle.

The Bluetooth

word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kia is under license.

A Bluetooth

enabled cell phone is required to use Bluetooth

Wireless Technology.

Apple

CarPlay,

iPhone,

and Siri

are registered trademarks of Apple Inc., registered in the U.S. and other countries.

CarPlay runs on your smartphone cellular data service. Normal data rates will apply.

Android Auto

vehicle user interface is a product of Google and its terms and privacy statements apply. Requires the

Android Auto app on Google Play

store and an Android compatible smartphone running Android 5.0 Lollipop or higher. Data plan rates apply. Android, Android Auto, and Google Play are trademarks of

Google LLC or its affiliates.

Purchase/lease of certain 2023 and newer Kia vehicles with Kia Connect (formerly known as UVO link) includes a complimentary 1-year subscription to Kia Connect Ultimate,

our most comprehensive Kia Connect package, starting from the new vehicle retail sale/lease date as recorded by the dealer. After your complimentary 1-year Kia Connect Ultimate subscription expires,

continued access to the full suite of Kia Connect features available on your Kia will require a paid subscription at the then-current subscription rate or your use of certain Kia Connect features may

immediately terminate. Use of Kia Connect is subject to agreement to the Kia Connect Privacy Policy and Terms of Service. Complimentary Kia Connect subscriptions are transferable to subsequent

owners during the original Kia Connect service term. Only use Kia Connect when safe to do so. Kia Access App is available from the Apple

App Store

or Google Play.

Kia America, Inc. reserves the

right to change or discontinue Kia Connect at any time without prior notification or incurring any future obligation. Message and data rates may apply. Cellular and GPS coverage is required to use most

features. Kia Connect features may vary by model, model year, and trim level. Features, specifications, and fees are subject to change. Kia Connect is currently unavailable for Model Year 2022 and

newer vehicles sold in Massachusetts; please see the Kia Owners Portal for updates on availability. For more on details and limitations, visit www.kia.com or your authorized Kia dealer. Apple and App

Store are registered trademarks of Apple Inc. Google and logos are trademarks of Google, LLC.

Do not use remote climate control or remote start if vehicle is in an enclosed area (e.g., closed garage)

or a partially enclosed area without ventilation. Close all doors leading from adjacent living areas to the vehicle area before executing a remote climate control or remote start command.

No system,

no matter how advanced, can compensate for all driver errors, driving conditions, accidents, and/or injury. Always drive safely and obey all traffic laws.

Rear Occupant Alert is not a substitute for one’s

attention. Always check the vehicle interior when exiting the vehicle.

Driver-assist technologies are not substitutes for safe driving, and may not detect all objects surrounding vehicle. Always drive

safely and use caution.

When engaged, Intelligent Speed Limit Assist is not a substitute for safe driving and may only function under certain conditions. Always drive safely and use caution.

When

engaged, Smart Cruise Control with Stop and Go is not a substitute for safe driving and cruise-control procedures. This is not an auto-pilot feature. Always drive safely and use caution. The Smart Cruise

Control system may not detect every object in front of the vehicle.

Driving with liftgate open may be unlawful and can draw dangerous exhaust fumes into vehicle; if you choose to do so, keep air vents

and windows open for proper ventilation.

Kia Digital Key 2 Touch requires an eligible Kia Connect subscription and a compatible smart device with an active data plan. Normal cellular service rates

may apply when using a smart device.

2023 Kia EV6 GT-Line, 2024 K5 GT, 2023 Sportage Plug-in Hybrid X-Line, and 2023 Telluride SX X-Pro shown with optional features. Not all optional features

available on all trims. Some features may vary. Kia received the fewest reported problems among mass market brands in the J.D. Power 2021-2023 U.S. Vehicle Dependability Study. 2023 Study based on

2020 models. See jdpower.com/awards for 2023 details.

Map/Over-The-Air Updates

The latest map and software are provided through wireless updates. New software is automatically downloaded when the vehicle is

on. After the installation of the software is complete, you can view the update details from the notification window.

The wireless update is accessible only when the system is connected to the network. To use the wireless update function, you need

to subscribe to the Kia Connect

service. When downloading new update files begins, the icon appears at the top right of the

screen. To view the progress of the download, navigate to the All Menus screen and press Setup > General > SW Info/Update. After

downloading new update files is complete, map update automatically begins, and the icon appears at the top right.

To update the system: If an update has automatically downloaded while you were away from your vehicle, a notification will appear

on the infotainment system screen that the update is ready to be installed.

To begin the installation process, turn off the vehicle (ACC Off). Then from the update notification window, press Install Now. The

update is performed immediately after the system reboots. Update details appear as soon as the update is complete.

For more information on over-the-air updates, please see your Car Infotainment System Quick Reference Guide.

Smart Key with Driver’s Door Lock/Unlock*

By carrying the Smart Key, you can Lock/Unlock the vehicle by pressing the BUTTON

or the

TOUCH SENSOR

on the driver’s door handle.

To Unlock/Lock ALL doors and liftgate: Be sure the 2 Press Unlock feature is DEACTIVATED.

To UNLOCK: Press the outside BUTTON

on the driver’s door handle OR touch the SENSOR

on the inside of the door handle once. This will unlock all doors and liftgate.

To LOCK: Press BUTTON

once to lock all doors and liftgate.

To Unlock/Lock DRIVER door, then ALL doors: Be sure the 2 Press Unlock feature

is ACTIVATED.

To UNLOCK: Press the outside BUTTON

on the driver’s door handle OR touch the SENSOR

(when equipped with the SX Sunroof Package) on the inside of the door handle once. This

will unlock the driver’s door. If you press the BUTTON or SENSOR, within 4 seconds again,

then all doors and liftgate will unlock.

To LOCK: Press BUTTON

once to lock all doors and liftgate.

To activate or deactivate the 2 Press Unlock feature:

On the Instrument Cluster: Select User Settings > Door > 2 Press Unlock.

On the infotainment system: Press Setup > Vehicle > Door > 2 Press Unlock.

Digital Key 2 Touch*

Digital Key 2 Touch, through your smartphone, can be used to lock and unlock your vehicle and allow you to start or power off your

vehicle, without needing to have a key fob.

Digital Key 2 Touch Setup:

1. First, ensure your Smart Key is inside the vehicle and turn the vehicle on.

2. Download the Kia Access App and activate Kia Connect in your vehicle’s infotainment system (see page 34 in the Seltos Features

and Function Guide).

3. Register your smartphone by going to the Vehicle Settings on the infotainment system

—

Press Setup > Vehicle > Digital Key >

Smartphone Key > My Smartphone Key.

4. On your smartphone, press Digital Key > Continue To Wallet App > Continue again, which will open the Wallet app. Follow the

prompts to complete the registration/pairing of your smartphone.

5. Place your smartphone in the authentication pad (wireless charging pad) to complete registration. Press Save on the infotainment

system screen and a message will appear showing the process is in place.

6. When the infotainment system is done pairing, remove the smartphone and continue the steps to open the Digital Key in your

iPhone

Wallet or Samsung

Wallet.

7. When in the Wallet app, press the Digital Key and select the menu icon to adjust other settings or use other features.

Using your Digital Key 2 Touch:

1. To lock or unlock your vehicle with Digital Key, place your smartphone on/near the door handle until smartphone vibrates.

2. To start your vehicle with Digital Key 2 Touch, place registered smartphone on the authentication pad (wireless charging pad),

press the brake pedal and the Start/Stop button.

Sharing your Digital Key 2 Touch:

1. Open the Wallet app, press the Kia Digital Key, and select the menu icon to enter settings.

2. Under PEOPLE, press Invite, and follow the prompts to share your Digital Key with one of your contacts on your

Apple iPhone

/Watch

or Samsung

phone.

Note: Digital Key 2 Touch is only available on the SX trim with the SX Sunroof Package.

#1 for Long-Term Dependability

among Mass Market Brands for 3 Years in a Row (2021-2023)