802.11ac Wave 2 Indoor/Outdoor
Enterprise Wi-Fi Access Point
Model: UAP-FlexHD
Package Contents
UniFi AP FlexHD Base
Mount
Outdoor
Mount
Wall/Pole
Mount
Plastic Ties
(Qty. 2)
PoE Adapter*
(48V, 0.32A)
Power
Cord
Security
Screw
Screws
(Qty. 3)
Screw Anchors
(Qty. 3)
* Included only in the single-pack of the UAP-FlexHD
Installation Requirements
• Phillips screwdriver
• Cat5/6 UTP cable for indoor installations
• Shielded Category 5 (or above) cabling should be used
for all outdoor wired Ethernet connections and should be
grounded through the AC ground of the PoE.
System Requirements
• UniFi Cloud Key or Dream Machine, or machine running
Linux, Mac OS X, or Windows 7/8/10
• Java Runtime Environment 1.8 or above recommended
• Web Browser: Google Chrome (Other browsers may have
limited functionality.)
• UniFi Controller software v5.11.31 or newer (available at:
ui.com/download/unifi)
Hardware Overview
LED
1
LED Color Status
White
Factory default, waiting to be integrated.
Flashing White
Initializing.
Alternating
White/Blue
Device is busy; do not touch or unplug it.
This usually indicates that a process such
as a firmware upgrade is taking place.
Blue
Indicates the device has been successfully
integrated into a network and is working
properly.
Quickly
Flashing Blue
This is used to locate an AP.
When you click Locate in the UniFi
Controller software, the AP will flash. It
will also display the location of the AP on
the map.
Steady Blue
with Occasional
Flashing
Indicates the device is in an isolated state
(all WLANs are brought down until an
uplink is found).
Ports
3
2
Ethernet Gigabit Ethernet port used to connect 802.3af PoE
power and should be connected to the LAN and DHCPserver.
Reset The Reset button serves two functions for the UniFi AP:
• Restart Press and release the Reset button quickly.
• Restore to Factory Default Settings Press and hold the
Reset button for more than five seconds.
Installation
Determine the installation location of the UAP FlexHD:
• Desktop For installing on a flat surface such as a desktop
or table/shelf; could be set up for temporary installations.
• Wall For installing in a secure location; used more for
stationary or permanent installations.
• Ceiling For installing in a ceiling tile using the optional
recessed ceiling mount assembly (sold separately).
• Pole For installing on a pole (indoor or outdoor).
Note: When installing Ethernet cabling on a pole or
up the outer surface of a wall, use RJ45 connectors
without strain-relief boots on them. This will prevent
unnecessary tension on the cable ends.
Cable without a strain-relief boot Cable with a strain-relief boot
Proceed to the appropriate section for your installation.
Desktop
1. Remove the Base Mount from the UAP FlexHD.
2. Connect an Ethernet cable to the Ethernet Port in the base
of the UAP FlexHD.
3. Reattach the Base Mount to the UAP FlexHD.
4. Orient the UAP FlexHD in the upright position and place on
a flat surface for installation.
Wall
If the Ethernet cable is coming from the inside of a wall:
1. Bend and remove the plastic tab that covers the cable feed.
2. Use the Wall Mount as a template to mark the holes on the
wall where the UAP FlexHD will be installed.
3. Pre-drill the holes in the wall and pull the Ethernet cable
forward, sliding it through the opening in the Wall Mount.
Then use the Screws and Screw Anchors to secure the Wall
Mount to the wall.
4. Connect the Ethernet cable to the Ethernet Port and slide
the UAP FlexHD onto the wall mount.
Note: If you are mounting the UAP-FlexHD outside or
near the outdoors, attach the Outdoor Mount prior to
attaching the UAP FlexHD to the Wall Mount.
Installation complete.
Indoor Installation
(without Outdoor Mount)
Outdoor Installation
(with Outdoor Mount)
Ceiling (Optional Accessory)
Use the optional Ceiling Mount, Mount Cover, and
Back Plate Assembly to install the UAP FlexHD on
a drop tile ceiling or horizontal surface where the
interior side of the Ceiling Mount is accessible.
1. Use the base of the Ceiling Mount as a template to
mark the diameter of the hole where the UAP FlexHD
will be installed. Then, cut along the marked line to make
a hole in the ceiling tile.
2. Slide the Ceiling Mount through the hole and secure it to
the ceiling tile by attaching the Back Plate Assembly to
the Ceiling Mount.
3. Pass the Ethernet cable through the Ceiling Mount and
connect it to the Ethernet port on the UAP FlexHD.
4. Slide the UAP FlexHD all the way up into the Ceiling Mount
until it snaps into place. Then, attach the magnetic cover to
the base of the ceiling mount.
Installation complete.
Pole
Note: If you are mounting the UAP-FlexHD outdoors,
it must be installed in the upright position to prevent
water from getting into the base of the device.
1. Attach the Pole Mount to a pole using the included Zip Ties.
2. Slide the Ethernet cable through the opening in the
Outdoor Mount and connect the Ethernet cable to the
Ethernet Port.
3. Attach the Outdoor Mount to the UAP FlexHD.
4. Slide the UAP FlexHD onto the Pole Mount.
5. Use a phillips screwdriver to install the Security Screw
through the Outdoor Mount and into the base of the
UAP FlexHD. This secures the device to the pole mount.
Installation complete.
Powering the UAP-FlexHD
The UAP-FlexHD features auto-sensing 802.3af PoE support
and can be powered by any of the following:
• Ubiquiti UniFi Switch with 802.3af PoE support
• Ubiquiti Gigabit PoE Adapter (48V, 0.32A) (included)
Connecting to an 802.3af PoE Switch
Connect the Ethernet cable from the UAP-FlexHD directly to
an 802.3af PoE port on the switch.
Connecting to a PoE Adapter
1. Connect the Ethernet cable from the UAP-FlexHD to the
POE port of the Gigabit PoE adapter.
2. Connect an Ethernet cable from your LAN to the LAN port
of the Gigabit PoE adapter.
3. Connect the Power Cord to the adapter, and then plug the
Power Cord into a power outlet.
Mounting the PoE Adapter (Optional)
1. Remove the PoE Mounting Bracket from the adapter, place
the bracket at the desired location, and mark the two holes.
2. Pre-drill the holes if necessary, and secure the bracket
using two fasteners (not included).
3. Align the adapter’s slots with the tabs of the PoE Mounting
Bracket, and then slide the adapterdown.
Software Installation
Download and install the latest version of the UniFi Controller
software. Launch it and follow the on-screen instructions. The
software and step-by-step instructions in the User Guide are
available at: ui.com/download/unifi
After you install the UniFi Controller software and run the
installation wizard, you will be prompted for the credentials
to log into UniFi Controller. Enter the username and password
you created and click Sign In.
You can manage your wireless network and view network
statistics using the UniFi Controller management interface.
For information on configuring and using the UniFi Controller
software, refer to the User Guide.
Mobile App Installation
Ubiquiti also offers the UniFi app, which is available from
the App Store® (iOS) or Google Play
™
Store (Android). You
can use it to provision a UniFi AP for basic functionality
without configuring a UniFi Controller. It also allows seamless
provisioning of APs for remote controllers (controllers not on
the same Layer 2 network) and easy access to local controllers
and those monitored on unifi.ui.com
Specifications
UAP-FlexHD
Dimensions
Ø 48.50 x 159.49 mm (1.90 x 6.28")
Weight 315 g (0.69 lb)
Networking Interface (1) 10/100/1000 Ethernet Port
Button Reset
LED White / Blue
Power Method 802.3af
Power Supply 802.3af
48V, 0.32A Gigabit PoE Adapter
Max. Power Consumption 10.5W
Supported Voltage Range 44 - 57VDC
Operating Frequency 2.4 GHz
5 GHz
Max. TX Power
2.4 GHz
5 GHz
23 dBm
26 dBm
Throughput
2.4 GHz
5 GHz
300 Mbps
1733 Mbps
Antenna Gain
2.4 GHz
5 GHz
1.6 dBi
4 dBi
Wi-Fi Standards 802.11 a/b/g/n/ac/ac-wave2
Wireless Security WEP, WPA-PSK,
WPA-Enterprise (WPA/WPA2, TKIP/AES)
Mounting Ceiling/Pole/Tabletop/Wall
Operating Temperature -30 to 70° C (-22 to 158° F)
Operating Humidity 5 to 95% Noncondensing
Certications CE, FCC, IC
Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.
WARNING: Do not use this product in a location that can
be submerged by water.
WARNING: Avoid using this product during an electrical
storm. There may be a remote risk of electric shock from
lightning.
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and current
requirements indicated on the manufacturer’s label. Connection to a
different power source than those specified may result in improper
operation, damage to the equipment or pose a fire hazard if the
limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service
should be provided only by a qualified service technician.
3. This equipment is provided with a detachable power cord which has
an integral safety ground wire intended for connection to a grounded
safety outlet.
a. Do not substitute the power cord with one that is not the provided
approved type. Never use an adapter plug to connect to a 2-wire
outlet as this will defeat the continuity of the grounding wire.
b. The equipment requires the use of the ground wire as a part of the
safety certification, modification or misuse can provide a shock
hazard that can result in serious injury or death.
c. Contact a qualified electrician or the manufacturer if there
are questions about the installation prior to connecting the
equipment.
d. Protective earthing is provided by Listed AC adapter. Building
installation shall provide appropriate short-circuit backup
protection.
e. Protective bonding must be installed in accordance with local
national wiring rules and regulations.
Limited Warranty
www.ui.com/support/warranty
The limited warranty requires the use of arbitration to resolve disputes on
an individual basis, and, where applicable, specify arbitration instead of
jury trials or class actions.
Compliance
FCC
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. Operations of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
This radio transmitter (FCC ID: SWX-UAPFLEXHD) has been approved by FCC.
ISED Canada
CAN ICES-3(A)/NMB-3(A)
This device complies with ISED Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that
may cause undesired operation of the device.
This radio transmitter (IC: 6545A-UAPFLEXHD) has been approved by ISED
Canada.
The device for operation in the band 5150-5250 MHz is only for indoor
use to reduce the potential for harmful interference to co-channel mobile
satellite systems.
CAN ICES-3(A)/NMB-3(A)
Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
1. l’appareil ne doit pas produire de brouillage;
2. l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
Le présent émetteur radio (IC : 6545A-UAPFLEXHD) a été approuvé par
ISDE Canada.
Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés
uniquement pour une utilisation à l’intérieur afin de réduire les risques
de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les
mêmes canaux.
IMPORTANT NOTE:
Radiation Exposure Statement:
• This equipment complies with radiation exposure limits set forth for an
uncontrolled environment.
• This equipment should be installed and operated with minimum
distance 21 cm between the radiator and your body.
• This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
AVIS IMPORTANT :
Déclaration sur l’exposition aux rayonnements :
• Cet équipement est conforme aux limites prévues pour l’exposition aux
rayonnements dans un environnement non contrôlé.
• Lors de l’installation et de la mise en fonctionnement de l’équipement,
assurez-vous qu’il y ait une distance minimale de 21 cm entre l’élément
rayonnant et vous.
• Cet émetteur ne doit être installé à proximité d’aucune autre antenne
ni d’aucun autre émetteur, et ne doit être utilisé conjointement à aucun
autre de ces appareils.
Australia and New Zealand
Warning: This is a Class A product. In a domestic environment this
product may cause radio interference in which case the user may
be required to take adequate measures.
Brazil
Nota: Este equipamento não tem direito à proteção contra
interferência prejudicial e não pode causar interferência em
sistemas devidamente autorizados.
CE Marking
CE marking on this product represents the product is in compliance with all
directives that are applicable to it.
Country List
AT BE BG CY CZ DE DK EE EL ES FI FR HR HU
IE IT LV LT LU MT NL PL PT RO SE SI SK UK
BFWA (Broadband Fixed Wireless Access) members noted in blue
Note: This device meets Max. TX power limit per ETSI regulations.
The following apply to products that operate in the 5 GHz frequency range:
Note: This device is restricted to indoor use only when operating
in the 5150 - 5350 MHz frequency range within all member states.
Note: All countries listed may operate at 30 dBm. BFWA member
states may operate at 36 dBm.
Note: Operation in the 5.8 GHz frequency band is prohibited in
BFWA member states. Other countries listed may use the 5.8 GHz
frequency band.
RoHS/WEEE Compliance Statement
English
European Directive 2012/19/EU requires that the equipment bearing
this symbol on the product and/or its packaging must not be disposed
of with unsorted municipal waste. The symbol indicates that this
product should be disposed of separately from regular household waste
streams. It is your responsibility to dispose of this and other electric and
electronic equipment via designated collection facilities appointed by the
government or local authorities. Correct disposal and recycling will help
prevent potential negative consequences to the environment and human
health. For more detailed information about the disposal of your old
equipment, please contact your local authorities, waste disposal service, or
the shop where you purchased the product.
Deutsch
Die Europäische Richtlinie 2012/19/EU verlangt, dass technische
Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit diesem
Symbol versehen ist, nicht zusammen mit unsortiertem Gemeindeabfall
entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt
von regulärem Haushaltmüll getrennt entsorgt werden sollte. Es
liegt in Ihrer Verantwortung, dieses Gerät und andere elektrische
und elektronische Geräte über die dafür zuständigen und von der
Regierung oder örtlichen Behörden dazu bestimmten Sammelstellen zu
entsorgen. Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei,
potentielle negative Folgen für Umwelt und die menschliche Gesundheit
zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung Ihrer
Altgeräte benötigen, wenden Sie sich bitte an die örtlichen Behörden oder
städtischen Entsorgungsdienste oder an den Händler, bei dem Sie das
Produkt erworben haben.
Español
La Directiva 2012/19/UE exige que los equipos que lleven este símbolo en
el propio aparato y/o en su embalaje no deben eliminarse junto con otros
residuos urbanos no seleccionados. El símbolo indica que el producto
en cuestión debe separarse de los residuos domésticos convencionales
con vistas a su eliminación. Es responsabilidad suya desechar este y
cualesquiera otros aparatos eléctricos y electrónicos a través de los puntos
de recogida que ponen a su disposición el gobierno y las autoridades
locales. Al desechar y reciclar correctamente estos aparatos estará
contribuyendo a evitar posibles consecuencias negativas para el medio
ambiente y la salud de las personas. Si desea obtener información más
detallada sobre la eliminación segura de su aparato usado, consulte a las
autoridades locales, al servicio de recogida y eliminación de residuos de su
zona o pregunte en la tienda donde adquirió el producto.
Français
La directive européenne 2012/19/UE exige que l’équipement sur lequel
est apposé ce symbole sur le produit et/ou son emballage ne soit pas jeté
avec les autres ordures ménagères. Ce symbole indique que le produit
doit être éliminé dans un circuit distinct de celui pour les déchets des
ménages. Il est de votre responsabilité de jeter ce matériel ainsi que tout
autre matériel électrique ou électronique par les moyens de collecte
indiqués par le gouvernement et les pouvoirs publics des collectivités
territoriales. L’élimination et le recyclage en bonne et due forme ont pour
but de lutter contre l’impact néfaste potentiel de ce type de produits
sur l’environnement et la santé publique. Pour plus d’informations sur le
mode d’élimination de votre ancien équipement, veuillez prendre contact
avec les pouvoirs publics locaux, le service de traitement des déchets, ou
l’endroit où vous avez acheté le produit.
Italiano
La direttiva europea 2012/19/UE richiede che le apparecchiature
contrassegnate con questo simbolo sul prodotto e/o sull’imballaggio non
siano smaltite insieme ai rifiuti urbani non differenziati. Il simbolo indica
che questo prodotto non deve essere smaltito insieme ai normali rifiuti
domestici. È responsabilità del proprietario smaltire sia questi prodotti sia
le altre apparecchiature elettriche ed elettroniche mediante le specifiche
strutture di raccolta indicate dal governo o dagli enti pubblici locali. Il
corretto smaltimento ed il riciclaggio aiuteranno a prevenire conseguenze
potenzialmente negative per l’ambiente e per la salute dell’essere umano.
Per ricevere informazioni più dettagliate circa lo smaltimento delle vecchie
apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti
pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel
quale avete acquistato il prodotto.
Declaration of Conformity
български [Bulgarian] С настоящото UBIQUITI декларира, че този тип радиосъоръжение
UAP-FlexHD е в съответствие с Директива 2014/53/EU, 2014/30/EU & 2014/35/EU. Цялостният
текст на ЕС декларацията за съответствие може да се намери на следния интернет адрес:
www.ui.com/compliance
Hrvatski [Croatian] UBIQUITI ovime izjavljuje da je radijska oprema tipa UAP-FlexHD u skladu
s Direktivom 2014/53/EU, 2014/30/EU & 2014/35/EU. Cjeloviti tekst EU izjave o sukladnosti
dostupan je na sljedećoj internetskoj adresi:
www.ui.com/compliance
Čeština [Czech] Tímto UBIQUITI prohlašuje, že typ rádiového zařízení UAP-FlexHD je v souladu se
směrnicí 2014/53/EU, 2014/30/EU & 2014/35/EU. Úplné znění EU prohlášení o shodě je k dispozici
na této internetové adrese:
www.ui.com/compliance
Dansk [Danish] Hermed erklærer UBIQUITI, at radioudstyrstypen UAP-FlexHD
er i overensstemmelse med direktiv 2014/53/EU, 2014/30/EU & 2014/35/EU.
EU-overensstemmelseserklæringens fulde tekst kan findes på følgende internetadresse:
www.ui.com/compliance
Nederlands [Dutch] Hierbij verklaar ik, UBIQUITI, dat het type radioapparatuur UAP-FlexHD
conform is met Richtlijn 2014/53/EU, 2014/30/EU & 2014/35/EU. De volledige tekst van
de EU-conformiteitsverklaring kan worden geraadpleegd op het volgende internetadres:
www.ui.com/compliance
English
Hereby, UBIQUITI declares that the radio equipment type
UAP-FlexHD
is in compliance
with Directive 2014/53/EU, 2014/30/EU & 2014/35/EU. The full text of the EU declaration of
conformity is available at the following internet address: www.ui.com/compliance
Eesti keel [Estonian] Käesolevaga deklareerib UBIQUITI, et käesolev raadioseadme
tüüp UAP-FlexHD vastab direktiivi 2014/53/EU, 2014/30/EU & 2014/35/EU nõuetele.
ELi vastavusdeklaratsiooni täielik tekst on kättesaadav järgmisel internetiaadressil:
www.ui.com/compliance
Suomi [Finnish] UBIQUITI vakuuttaa, että radiolaitetyyppi UAP-FlexHD on direktiivin
2014/53/EU, 2014/30/EU & 2014/35/EU mukainen. EU-vaatimustenmukaisuusvakuutuksen
täysimittainen teksti on saatavilla seuraavassa internetosoitteessa:
www.ui.com/compliance
Français [French] Le soussigné, UBIQUITI, déclare que l’équipement radioélectrique du type
UAP-FlexHD est conforme à la directive 2014/53/UE, 2014/30/UE & 2014/35/UE. Le texte
complet de la déclaration UE de conformité est disponible à l’adresse internet suivante:
www.ui.com/compliance
Deutsch [German] Hiermit erklärt UBIQUITI, dass der Funkanlagentyp UAP-FlexHD
der Richtlinie 2014/53/EU, 2014/30/EU & 2014/35/EU entspricht. Der vollständige
Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar:
www.ui.com/compliance
Ελληνικά [Greek] Με την παρούσα ο/η UBIQUITI, δηλώνει ότι ο ραδιοεξοπλισμός
UAP-FlexHD πληροί την οδηγία 2014/53/EE, 2014/30/EE & 2014/35/EE. Το πλήρες κείμενο
της δήλωσης συμμόρφωσης ΕΕ διατίθεται στην ακόλουθη ιστοσελίδα στο διαδίκτυο:
www.ui.com/compliance
Magyar [Hungarian] UBIQUITI igazolja, hogy a UAP-FlexHD típusú rádióberendezés megfelel
a 2014/53/EU, 2014/30/EU & 2014/35/EU irányelvnek. Az EU-megfelelőségi nyilatkozat teljes
szövege elérhető a következő internetes címen:
www.ui.com/compliance
Íslenska [Icelandic] Hér með lýsir UBIQUITI yfir því að UAP-FlexHD er í samræmi við grunnkröfur
og aðrar kröfur, sem gerðar eru í tilskipun 2014/53/EU, 2014/30/EU & 2014/35/EU. Fullur texti ESB
samræmisyfirlýsing er að finna á eftirfarandi netfangi:
www.ui.com/compliance
Italiano [Italian] Il fabbricante, UBIQUITI, dichiara che il tipo di apparecchiatura radio
UAP-FlexHD èconforme alla direttiva 2014/53/UE, 2014/30/UE & 2014/35/UE. Il testo
completo della dichiarazione di conformità UE è disponibile al seguente indirizzo Internet:
www.ui.com/compliance
Latviešu valoda [Latvian] Ar šo UBIQUITI deklarē, ka radioiekārta UAP-FlexHD atbilst Direktīvai
2014/53/ES, 2014/30/ES & 2014/35/ES. Pilns ES atbilstības deklarācijas teksts ir pieejams šādā
interneta vietnē:
www.ui.com/compliance
Lietuvių kalba [Lithuanian] Aš, UBIQUITI, patvirtinu, kad radijo įrenginių tipas UAP-FlexHD atitinka
Direktyvą 2014/53/ES, 2014/30/ES & 2014/35/ES. Visas ES atitikties deklaracijos tekstas prieinamas
šiuo interneto adresu:
www.ui.com/compliance
Malti [Maltese]
B’dan, UBIQUITI, niddikjara li dan it-tip ta’ tagħmir tar-radju
UAP-FlexHD
huwa
konformi mad-Direttiva 2014/53/EU, 2014/30/EU & 2014/35/EU. Id-dikjarazzjoni tal-konformità tista’
tiġi kkonsultata minn www.ui.com/compliance
Norsk [Norwegian]
UBIQUITI erklærer herved at utstyret
UAP-FlexHD
er i samsvar med de
grunnleggende krav og øvrige relevante krav i direktiv 2014/53/EU, 2014/30/EU & 2014/35/EU.
Den fulle teksten til EU-samsvarserklæringen er tilgjengelig på følgende internettadresse:
www.ui.com/compliance
Polski [Polish] UBIQUITI niniejszym oświadcza, że typ urządzenia radiowego UAP-FlexHD jest
zgodny z dyrektywą 2014/53/EU, 2014/30/EU & 2014/35/EU. Pełny tekst deklaracji zgodności UE
jest dostępny pod następującym adresem internetowym:
www.ui.com/compliance
Português [Portuguese] O(a) abaixo assinado(a) UBIQUITI declara que o presente
tipo de equipamento de rádio UAP-FlexHD está em conformidade com a Diretiva
2014/53/EU, 2014/30/EU & 2014/35/EU. O texto integral da declaração de conformidade está
disponível no seguinte endereço de Internet:
www.ui.com/compliance
Română [Romanian] Prin prezenta, UBIQUITI declară că tipul de echipamente radio
UAP-FlexHD este în conformitate cu Directiva 2014/53/UE, 2014/30/UE & 2014/35/UE. Textul
integral al declarației UE de conformitate este disponibil la următoarea adresă internet:
www.ui.com/compliance
Slovenčina [Slovak]
UBIQUITI
týmto vyhlasuje, že rádiové zariadenie typu UAP-FlexHD je v súlade
so smernicou 2014/53/EU, 2014/30/EU & 2014/35/EU. Úplné EÚ vyhlásenie o zhode je k dispozícii
na tejto internetovej adrese:
www.ui.com/compliance
Slovenščina [Slovenian]
UBIQUITI potrjuje, da je tip radijske opreme
UAP-FlexHD
skladen z
Direktivo 2014/53/EU, 2014/30/EU & 2014/35/EU. Celotno besedilo izjave EU o skladnosti je na voljo
na naslednjem spletnem naslovu: www.ui.com/compliance
Español [Spanish] Por la presente, UBIQUITI declara que el tipo de equipo radioeléctrico
UAP-FlexHD es conforme con la Directiva 2014/53/UE, 2014/30/UE & 2014/35/UE. El texto
completo de la declaración UE de conformidad está disponible en la dirección Internet siguiente:
www.ui.com/compliance
Svenska [Swedish] Härmed försäkrar UBIQUITI att denna typ av radioutrustning
UAP-FlexHD överensstämmer med direktiv 2014/53/EU, 2014/30/EU & 2014/35/EU. Den
fullständiga texten till EU-försäkran om överensstämmelse finns på följande webbadress:
www.ui.com/compliance
©2019 Ubiquiti Inc. All rights reserved. Ubiquiti, the Ubiquiti U logo, the Ubiquiti
beam logo, TOUGHCable, and UniFi are trademarks or registered trademarks of
Ubiquiti Networks, Inc. in the United States and in other countries. Apple and
the Apple logo are trademarks of Apple Inc., registered in the U.S. and other
countries. App Store is a service mark of Apple Inc., registered in the U.S. and
other countries. Android, Google, Google Play, the Google Play logo and other
marks are trademarks of Google Inc. All other trademarks are the property of their
respective owners. AJ092419
Online Resources
Support help.ui.com
Community community.ui.com
Downloads downloads.ui.com
Ubiquiti Inc.
685 Third Avenue, 27th Floor
New York, NY 10017
USA
www.ui.com
