Z Meridian
®
Lateral Files Price Book (/) 1
Introduction page 2
Meridian
®
Lateral Files 3
Stackable
™
Lateral Files (Spec-A-File)
Freestanding Stackable Lateral Files (Standard Configuration)
Standard Pull
Arc Pull
Bar Pull
Bevel Pull
Ellipse Pull
Sloped Pull
Stackable Lateral File Cushion Tops
Mobile Stackable Lateral Files
Standard Pull
Bevel Pull
Low Credenza
File Tops
File Surrounds
Stackable Lateral File Accessories
Keyless Locks
Indices 91
By Name
By Number
Appendices
-Day or Less/Assigned Lead-Time Order Information
Keyed-Alike Information
Vary Easy Program
Stain-to-Match Program
Customer’s Own Material/Customer’s Own Leather Order Information-Cushion Tops
Textiles Application Chart-Seating
Textile Colors
For the latest materials information, refer to the Materials pages on HermanMiller.com.
Y
Price Book
Prices effective July 1,
Published September
Meridian
®
Lateral Files
2 Meridian
®
Lateral Files Price Book (/) HermanMiller
Introduction
General Information
This book is effective July 1, , subject to change without
notice. Products may be purchased from authorized Herman Miller
dealers who will quote prices upon request. For more information
about our products and services or to see a list of dealers, visit www.
HermanMiller.com.
All prices are list prices. Additional services, such as planning
services, design, storage, and installation, are not included and must
be added to these prices when the additional services are requested.
Illustrations, specifications, and prices are based on the latest
information at the time of publication. The right is reserved to make
changes at any time without notice in prices, fabrics, finishes, mate-
rials, specifications, and models, and also to discontinue models and
finishes.
Dimensions shown in the drawings are engineering drawing
dimensions rounded up to the nearest
/
”. Product is shipped set
up or knocked down. Products that include “Shipped knocked down”
in the description require some assembly. If this statement does not
appear in the description, the product is shipped assembled.
Service problems are normally handled by a Herman Miller
authorized dealer. Where this cannot be accomplished on a local
level, service problems should be referred to the Customer Care
Representative for your region, Herman Miller, Inc., Zeeland,
Michigan 49464.
20-Day or Less/Assigned Lead-Time Shipments
All products and options in this price book not designated by an
Assigned Program icon A will ship in 20 business days or less after
being acknowledged by Herman Miller.
Products and options designated by an A are on the assigned
lead- time program and may ship in days, less than days, or
more than days from order acknowledgement.
A Note on the Organization of This Book
There are a few signals that will help you understand the organization
of this book. Once you know them, you should be able to find your
way around easily.
Like a newspaper, this book is formatted with columns of text
and illustrations that run vertically.
Information wraps from one column to the next and continues for as
many pages as it needs to.
Black bars are clues.
A black bar at the top of a page signals the start of information about
a product.
This information is divided into two sections, each signaled by
a black bar. Product Information includes a description, additional
notes, and dimensional drawings. Specification Information, which
always begins at the top of a column, includes a series of steps. Each
step represents a decision you need to make in order to complete
your product number. Steps must be followed sequentially. The
number of pages needed to complete information on a product var-
ies; some will be complete in one page; others may fill three or four
pages. Just continue going through the steps until you run into the
next product, signaled by the black bar at the top of the page.
Black tabs running along the outside edge of the page help you
locate what section you are in or what section you want to go to. You
can thumb forwards or backwards to find a section; tabs and text
appear on both sides of the page.
The additional pages in the back of the book include the appendi-
ces and indices. They are signaled by a long black bar running along
the outside edge of the page.
The index is presented two ways.
The first index is in alphabetical order by product name. It can be
helpful if you are new to the products and numbering scheme or if
you are looking for a type of product, such as work chair or round
table.
The second index is by product number. It lists, in alphanumeric
order, the base product number, typically a five-digit number.
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 3
Meridian
®
Lateral Files
Stackable™ Lateral Files (Spec-A-File)
4 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Drawer Capacity
Filing
Comparison
Front-to-Back Letter
53
1
/4 Filing Inches
Side-to-Side Letter or Legal
38
1
/2 Filing Inches
42” Wide Drawers
Module
Type
Side-to-Side
Filing in:
C,D,N,E,G,H, & L modules
Front-to-Back
Filing in:
N, E & D modules
Case
Depth
20” or 18”
20”
18”
30”
Letter
30”
Legal
26
1
/2” 26
1
/2”
35
1
/2”
31
1
/2”
N/A
N/A
36”
Letter
36”
Legal
32
1
/2” 32
1
/2”
41
1
/2”
37
1
/2”
35
1
/2”
31
1
/2”
42”
Letter
42”
Legal
38
1
/2” 38
1
/2”
53
1
/4”
47
1
/4”
35
1
/2”
31
1
/2”
Front-to-Back Letter
41
1
/2 Filing Inches
Front-to-Back Legal
35
1
/2 Filing Inches
Side-to-Side Letter or Legal
32
1
/2 Filing Inches
36” Wide Drawers
Note: 38% more filing
capacity than side-to-side
filing.
Note: 28% more filing
capacity than side-to-side
letter type.
Note: 9% more filing
capacity than side-to-side
legal type.
Front-to-Back Letter
35
1
/2 Filing Inches
Side-to-Side Letter or Legal
26
1
/2 Filing Inches
30” Wide Drawers
Note: 34% more filing
capacity than side-to-side
letter type.
Meridian
®
Stackable
™
Lateral Files
Drawer Capacity & 20” Depth Filing
Wasted space
Wasted space
Wasted space
Meridian
®
Lateral Files Price Book (9/24)
5
HermanMiller
6
Meridian
®
Lateral Files Price Book (9/24)
HermanMiller
Meridian
®
Stackable
™
Lateral Files
General Information
Standard Pull (26)
Bar Pull (2KP)
Bevel Pull (24)
Spec-A-File
General
Information
Tops
Four heights are available (
1
/32”, 1”, 1
1
/4”, 6
1
/2”) in finishes
of baked enamel. Laminate and veneer tops are available in
1
1
/4” only. Veneer tops with oversail edge are 1
1
/8”.
Modules
Various modules are available in heights of 11
3
/4”, 13
1
/8”,
15
1
/8”, 17
5
/8”, and 26
1
/4”.
Interiors
Several interior options are provided to meet your filing
needs.
Bases
Five heights are available (1”, 1
1
/2”, 2
1
/4”, 3
1
/4”, 4
1
/4”) in
finishes of baked enamel.
Locks
Flush locks.
Final Assembly
Meridian will assemble all components as a complete lateral
file up to 78”. Files taller than 78” will be shipped as two
units for final field assembly. Instructions are included.
General Information
The Spec-A-File ordering procedure was designed to aid
specifiers in meeting their exact filing needs. Since each
component of the file (top, module, interior, base) is
chosen individually, each file is a unique storage solution.
The variety of top, module, and base heights available make
the concern of meeting critical vertical heights a thing of the
past.
Spec-A-File is comprised of the following four components.
Each component must be clearly specified and priced
separately.
Multiple Paints
Multiple paints are available on a single unit by specifying one
of the following options:
F: Different case and front finishes
M: Different top, module, and base finishes
N: Unit all one color
Meridian
®
Lateral Files Price Book (9/24)
7
HermanMiller
Advanced Options
Multiple Locks – Standard Pull
Since the lock is housed in the module frame of standard pull
lateral files, locks can be strategically placed to accommodate
multiple users in one filing unit. In the case
of keyed alike, identified modules will have factory-installed
lockbars and lock hole knocked out to allow for field installation
of lock cylinder. If additional security is required between
drawers, specify security pans between modules.
Existing files can be retrofitted with multiple locks by requesting
a stile lock hardware kit from your Customer Care representative.
Combination Lateral File
It is considered to be a combination lateral file when combining
standard pull with bevel or contour pull lateral file drawers.
To specify a combination unit, choose a bevel or contour pull
lateral file in Advanced Spec-A-File. The standard pull modules
will be listed on the module choices, signified by the following
note (2600 Series).
Meridian
®
Stackable
™
Lateral Files
Advanced Options
Spec-A-File
Add-On Modules
In order to accommodate additional filing needs, add-on
modules are available for field installation to an existing lateral
file. Modules do not have a base and can be ordered with or
without a top. If a lock cylinder is needed, see lock appendix for
ordering information. If the lock cylinder resides in the existing
file, the add-on modules will need to be specified with lockbars.
Example: 26-3618-ADDON
Lock Option: LB-Lockbars, to attach to an existing unit
Stacking on Open & Pass-Through Modules
When open modules are located in the bottom position with
drawer modules above, the unit must be ganged to a structural
wall or ganged to multiple units with a common top spanning
those units.
The flexibility and modularity of the stackable lateral file
modules allow a specifier to create an infinite number of
storage solutions.
To further enhance the uniqueness of the file, use one
of the following advanced options available in Advanced
Spec-A-File:
Tops Description Spec Code H D W
Meridian
®
Stackable
™
Lateral File Tops
Standard Pull (26)
Bar Pull (2KP)
Bevel Pull (24)
Spec-A-File
Square Edge Metal Top
Metal top with square edge.
Baked enamel finish.
1”T1
NT
30”
36”
42”
1
1
/4”
T2
20” or 18”
20” or 18” 30”
36”
42”
1
1
/4”T3 20” or 18” 30”
36”
42”
Radius Edge Metal Top
Metal top with radius edge
front and back. Baked enamel
finish.
1
1
/4”TL 20” or 18” 30”
36”
42”
L
aminate Top with Vinyl Edge
*
Laminate top with vinyl edge.
1
1
/4”
TF
A
20” or 18” 30”
36”
42”
Wood Veneer Top
Wood veneer top with
3mm edge banding.
1
1
/4”
TR
A
20” or 18” 30”
36”
42”
Recut Veneer Top
Recut veneer top with 3mm
edge banding.
1
/32”T6 20” or 18” 30”
36”
42”
Security Top
Flat steel cover with baked enamel
finish. Designed to protect contents
and minimize overall height; not to be
used for support or as an exposed top.
Available on N, E and H modules and
Overhead Storage Units only.
Note: Not field installable on Overhead
Storage Units.
6
1
/2”T7 20” or 18” 30”
36”
42”
Planter Top*
Steel shell with baked enamel finish.
Includes black plastic tub liner. Cannot
house a lock.
Note: When ordering a radius edge
laminate top, laminate top with vinyl
edge banding, planter top with a bevel
pull product, or a veneer top with
oversail edge, an additional top is
required if the file is to include a lock.
Call Customer Service for details.
$ 74.
$ 91.
$ 106.
$ 74.
$ 91.
$ 106.
N/C
$ 74.
$ 91.
$ 106.
$ 144.
$ 160.
$ 180.
$ 152.
$ 171.
$ 189.
$ 246.
$ 265.
$ 285.
$ 240.
$ 257.
$ 277.
$ 298.
$ 313.
$ 334.
$ 433.
$ 450.
$ 468.
LIST PRICE
*
No Top
1
1
/8”
TV1
A
20” or 18” 30”
36”
42”
Wood Veneer Top with Oversail Front
Edge*
Wood veneer top and wood
composite edge with oversail
front.
8
Meridian
®
Lateral Files Price Book (9/24)
HermanMiller
Meridian
®
Lateral Files Price Book (9/24)
9
HermanMiller
Meridian
®
Stackable
™
Lateral File
Cushion Tops/Cushion Fabrics
Standard Pull (26)
Bar Pull (2KP)
Bevel Pull (24)
Spec-A-File
Tops Description Spec Code H D W
LIST PRICE
Cushion Top
Cushion top available 1” or
2” high, provides temporary
guest seating. Attaches with
velcro strips to 1” metal top
included.
1”
2”
TC1
TC2
30”
36”
42”
18” or 20”
$ 489.
$ 489.
$ 489.
Cushion Fabric
Cushion available in Herman
Miller seating fabric.
Fabric requirements:
Customer’s Own Material
(COM) requires yardage listed
below.
See textile
appendices
for fabric
families and
color codes.
UPCHARGE
Width of Cushion Yards of Fabric
30” 1.05
36” 1.22
42” 1.40
When ordering more than one cushion, please round up
the total yardage requirement to the next full yard of fabric.
Tops Description Spec Code Fabric Category
Price Category 1
Price Category 2
Price Category 3
Price Category 4
Price Category 5
Price Category 7
Price Category 9
Price Category B
Price Category C
Price Category D
Price Category E
Price Category F
Price Category G
Price Category H
Price Category I
Price Category J
N/C
$ 75.
$ 91.
$ 112.
$ 132.
$ 151.
$ 1045.
$ 52.
$ 48.
$ 91.
$ 109.
$ 60.
$ 183.
$ 225.
$ 110.
$ 304.
10
Meridian
®
Lateral Files Price Book (9/24)
HermanMiller
Meridian
®
Stackable
™
Lateral File
Overhead Storage Units
Standard Pull (26)
Bar Pull (2KP)
Bevel Pull (24)
Spec-A-File
Description Spec Code H D W Standard Pull (26) Bar Pull (2KP) Bevel Pull (24)
OH
Overhead Storage*.
Cabinet with locking hinged
doors. Includes one adjustable
shelf.
Interior depth: 18” (20”) and
16” (18”). Interior height:
24
1
/4”.
26
1
/4”
OH
30”
36”
42”
20”
18” 30”
36”
42”
$ 785. $ 817. $ 785.
$ 881. $ 917. $ 881.
$ 985. $ 1028. $ 985.
$ 785. $ 817. $ 785.
$ 881. $ 917. $ 881.
$ 985. $ 1028. $ 985.
LIST PRICE
26
1
/4” High
OB
Overhead Storage*.
Cabinet without doors. Includes one
adjustable shelf.
Interior depth: 18” (20”) and 16”
(18”). Interior height: 24
1
/4”.
Note:
When ordering an overhead storage
with a bevel pull lateral file, an
additional top is required if the file
drawers are to lock. Call Customer
Service for details.
Application Notes:
Other modules can be placed on top
of an overhead storage unit only if
they have a fixed shelf.
Pull out shelves may not be used
above an overhead storage unit.
Note:
Doors and drawers will be proud of
this module.
26
1
/4”OB 30”
36”
42”
20”
18” 30”
36”
42”
$ 665. $ 665. N/A
$ 769. $ 769. N/A
$ 865. $ 865. N/A
$ 665. $ 665. N/A
$ 769. $ 769. N/A
$ 865. $ 865. N/A
*
*
Meridian
®
Lateral Files Price Book (9/24)
11
HermanMiller
Meridian
®
Stackable
™
Lateral File
Overhead Storage Units – Multi-User
Standard Pull (26)
Spec-A-File
Tops Description Spec Code H D W Standard Pull (26)
OI
23
1
/2”OI 30”
36”
42”
20”
18” 30”
36”
42”
$ 1209.
$ 1305.
$ 1398.
$ 1209.
$ 1305.
$ 1398.
LIST PRICE
OM
26
1
/4” partitioned overhead
storage unit with two
individually locking hinged
doors and one adjustable shelf
per opening.
Interior depth: 18” (20”) and
16” (18”). Interior height:
24
1
/4”.
26
1
/4”OM 30”
36”
42”
20”
18” 30”
36”
42”
$ 1250.
$ 1339.
$ 1435.
$ 1250.
$ 1339.
$ 1435.
The OI and OM overhead storage units can be used in conjunction with
individually locking standard pull drawer modules to create multi-user storage
and filing units. Security pans between drawers are available. Modules can
also be reversed. The following examples can be used as guidelines, or contact
your Customer Care representative for more details on reversed module stack
combinations.
Description Spec Code Cabinet D W
LIST PRICE
Additional Storage Shelf
Adjustable steel shelf with
baked enamel finish.
15” fits one opening of 30”
wide partitioned cabinet.
18” fits one opening of 36”
wide partitioned cabinet.
21” fits one opening of 42”
wide partitioned cabinet.
$ 76.
$ 83.
$ 92.
SSF-15
SSF-18
SSF-21
23
1
/2” partitioned overhead
storage unit with two
individually locking hinged
doors and one adjustable
shelf per opening.
Interior depth: 18” (20”) and
16” (18”). Interior height:
21
1
/2”.
12
Meridian
®
Lateral Files Price Book (9/24)
HermanMiller
Meridian
®
Stackable
™
Lateral File Modules
Standard Pull (26)
Bar Pull (2KP)
Bevel Pull (24)
Spec-A-File
Description Spec Code H D W Standard Pull (26) Bar Pull (2KP) Bevel Pull (24)
N
11
3
/4” High
Modules
LIST PRICE
File drawer / fixed front. Standard
9P interior: hanging folder rails for
front-to-back filing.
Optional interiors: 9M, 9R,
9W-LT, 9W-LG, 9C-LT, 9C-LG.
Interior depth: 17
3
/4” (20”) or
15
3
/4” (18”). Interior height: 10
5
/8”.
Hanging clearance: 9
7
/16” for 9P,
9R, 9C-LG, 9C-LT.
11
3
/4”N 20” or 18”
30”
36”
42”
$ 456. $ 475. $ 456.
$ 500. $ 519. $ 500.
$ 566. $ 585. $ 566.
D
Pull-out shelf / flip door. Standard
9M interior: 3 movable dividers
for side-to-side paper folder filing.
Optional interiors: 9Q, 9R, 9V,
9W-LT, 9W-LG, 9C-LT, 9C-LG. Interior
depth: 17
3
/4” (20”) or 15
3
/4” (18”).
Interior height: 10
1
/4”. Hanging
clearance: 9
7
/16” for 9P, 9R, 9C-LG,
9C-LT.
13
1
/8” 20” or 18” 30”
36”
42”
D
$ 489. N/A N/A
$ 527. N/A N/A
$ 583. N/A N/A
C
Fixed shelf / flip door. Standard
9M interior: 3 movable dividers
for side-to-side paper folder filing.
Optional interiors: 9V. Interior
depth: 17
3
/4” (20”) or 15
3
/4” (18”).
Interior height: 10
1
/4”.
13
1
/8” 20” or 18” 30”
36”
42”
C
$ 493. N/A N/A
$ 530. N/A N/A
$ 585. N/A N/A
F
Two half height drawers with
fixed fronts. Standard 9T interior:
3 adjustable partitions per half
drawer for index card filing. Interior
depth: 17
3
/4” (20”) or 15
3
/4” (18”).
Interior height: 5
3
/8”.
13
1
/8” 20” or 18” 30”
36”
42”
F
$ 827. $ 859. $ 827.
$ 864. $ 899. $ 864.
$ 923. $ 958. $ 923.
13
1
/8” High
E
File drawer / fixed front. Standard
9P interior: hanging folder rails
for front-to-back filing. Optional
interiors: 9M, 9R, 9W-LT, 9W-LG,
9C-LT, 9C-LG. Interior depth: 17
3
/4”
(20”) or 15
3
/4” (18”). Interior height:
12”. Hanging clearance: 9
7
/16” for
9P, 9R, 9C-LG, 9C-LT.
13
1
/8”E 20” or 18” 30”
36”
42”
$ 456. $ 475. $ 456.
$ 500. $ 519. $ 500.
$ 566. $ 585. $ 566.
Meridian
®
Lateral Files Price Book (9/24)
13
HermanMiller
Meridian
®
Stackable
™
Lateral File Modules – Continued
Standard Pull (26)
Bar Pull (2KP)
Bevel Pull (24)
Spec-A-File
Description Spec Code H D W Standard Pull (26) Bar Pull (2KP) Bevel Pull (24)
13
1
/8” High
Modules
LIST PRICE
K
Pass through unit. Interior
depth: 19
3
/4” (20”) or 17
3
/4”
(18”). Interior height: 11
7
/8”.
Note: Not field installable.
Note: Door and drawers will be
proud of this module when using
bar pull.
13
1
/8” 20” or 18” 30”
36”
42”
K
$ 445. $ 445. N/A
$ 479. $ 479. N/A
$ 539. $ 539. N/A
$ 542. $ 542. N/A
$ 573. $ 573. N/A
$ 609. $ 609. N/A
J
Open module with full back
accommodates binders up to
11
3
/4” tall. Interior depth 17
1
/2”
or 19
1
/2”. Interior height: 11
7
/8”.
Accommodates 9Y interiors
(sold separately).
Note: Cannot be used as
the bottom module if a
counterbalance is specified.
Note: Security top cannot be
attached to a “J” module.
Note: Door and drawers will be
proud of this module when using
bar pull.
13
1
/8” 20” or 18” 30”
36”
42”
J
14
Meridian
®
Lateral Files Price Book (9/24)
HermanMiller
Description Spec Code H D W Standard Pull (26) Bar Pull (2KP) Bevel Pull (24)
G
15
1
/8” High
Modules
LIST PRICE
Fixed shelf / flip door. Standard
9M interior: 3 movable dividers
for large folders and binder
storage.
Optional interiors: 9V.
Interior depth: 17
3
/4” (20”) or
15
3
/4” (18”). Interior height:
12
1
/4”.
Note: Drawer front does not
completely recede on 18” deep
modules.
15
1
/8” 20” or 18” 30”
36”
42”
G
S
15
1
/8” 20” or 18” 30”
36”
42”
S
X
17
5
/8” 20” or 18” 30”
36”
42”
X
Fixed shelf / locking sliding
doors. Ideal for binder storage.
Interior depth: 18” (20”) or 16”
(18”). Interior height: 13
1
/8”.
(KA) lock options not available.
Two drawers with 1 half high
and 1 file drawer. Interiors
available: 9P, 9M, 9R, 9W-LT,
9W-LG, 9C-LT, 9C-LG, for file
drawer only. Interior file drawer
depth: 17
3
/4” (20”) or 15
3
/4”
(18”). Interior height: 10
5
/8”.
Hanging clearance: 9
7
/16” for
9P, 9R, 9C-LG, and 9C-LT 15
3
/4”
(18”). Interior height: 10
5
/8”.
$ 618. N/A N/A
$ 664. N/A N/A
$ 715. N/A N/A
$ 549. N/A N/A
$ 586. N/A N/A
$ 652. N/A N/A
N/A $ 1138. N/A
N/A $ 1246. N/A
N/A $ 1377. N/A
Meridian
®
Stackable
™
Lateral File Modules – Continued
Standard Pull (26)
Bar Pull (2KP)
Bevel Pull (24)
Spec-A-File
17
5
/8” High
9W-LT
Interiors Description Filing Devices Spec Code
9P
Front-To-Back Filing
UPCHARGE
Front-to-back filing rails for hanging
file folders.
Standard in modules: E, N, P, X.
Hanging File
Folder
9P
Meridian
®
Stackable
™
Lateral Files
Interiors/Bases/Options
Standard Pull (26)
Bar Pull (2KP)
Bevel Pull (24)
Spec-A-File
9Q
Front-to-back filing rails for hanging file
folders. For use in flip door units.
Optional in D, L and H modules.
Hanging File
Folder
9Q
9C-LG
Combination front-to-back and side-to-
side rails for filing one row side-to-side
legal and one row front-to-back letter of
hanging file folders.
Optional in modules E, N, D, P, X.
Hanging File
Folder
9C-LG
9C-LT
Combination front-to-back and side-to-
side rails for filing one row side-to-side
letter and one row front-to-back legal of
hanging file folders.
Optional in modules E, N, D, P, X.
Hanging File
Folder
9C-LT
9T
Set of six movable partitions, 3 per half-
height drawer. Standard in modules
F only.
9T
9Y
Three movable magnetic dividers for large
binder storage. Side-to-Side Filing only.
12”H X 5”W X 16”D
9Y
9W-LG
Wobble dividers for filing letter size
paper folders front-to-back.
Optional in modules N, E, D, P, L, H.
File
Folder
9W-LT 30” wide
36” wide
42” wide
Expandable
Pocket
Folder
Letter
File Width 9M Dividers Letter Width Wobbles
30” 4 6
36” 4 6
42” 6 9
Wobble dividers for filing legal size
paper folders front-to-back.
Optional in modules N, E, D, P, L, H.
File
Folder
9W-LG 30” wide
36” wide
42” wide
Legal
File Width 9M Dividers Legal Width Wobbles
30” 2 3
36” 4 6
42” 4 6
N/C
N/C
N/C
N/C
$ 59.
$ 59.
$ 66.
$ 59.
$ 59.
$ 66.
N/C
N/C
Note: Interiors 9P, 9Q, 9C-LG, 9C-LT, 9M
and 9R for file drawer only in X module.
Meridian
®
Lateral Files Price Book (9/24)
15
HermanMiller
Meridian
®
Stackable
™
Lateral Files
Interiors/Bases/Options – Continued
Standard Pull (26)
Bar Pull (2KP)
Bevel Pull (24)
Spec-A-File
Interiors Description Filing Devices Spec Code
9M
Side-To-Side Filing
UPCHARGE
Three movable dividers for filing
paper folders.
Standard in modules: C, D, G, L.
Optional in modules: E, N, H, P, X.
File Folder
9M
Expandable
Pocket Folder
Binder
9R
Side-to-side rails for hanging file folders
(letter, legal, A-4, foolscap).
Optional in modules: E, N, D, H, P, X.
1 required for E, N, and P modules.
2 required for D and H modules.
Hanging File
Folder
9R
9V
Movable dividers (9M) with side-to-side
rail (9R) for tab style side-to-side filing.
Optional in modules: C, D, G, L.
File Folder
9V
9X
Side-to-side filing rails for computer
printout hanging binders and folders,
2 rails included.
Standard in H module.
Optional in L module.
Standard Hanging
Computer Paper
Folder
9X
N/C
N/C
N/C
N/C
Description Spec Code H D W
Bases / Options
LIST PRICE
Counterbalance Weight
Recommended for 2 and
3-high lateral files.
CB Add $86 to Counterweight price for
1-high freestanding lateral modules N,
E, D, P, L and H
Bases
Frame-type steel base
with baked enamel finish.
Includes four adjustable
leveling glides.
1”
1
1
/2”
2
1
/4”
3
1
/4”
4
1
/4”
B1
B2
B3
B4
B5
20” or 18”
30”
36”
42”
30”
36”
42”
20” or 18”
$ 89.
$ 105.
$ 122.
$ 128.
$ 147.
$ 161.
Lock
Flush lock. Locks are located in the
module frame in the standard pull
lateral file. Locks are located in the
top in the bevel pull lateral files.
KD, KC, or KA
$ 45.
Security Pan
Flat steel pan placed
between modules of a
lateral file stack. For use
on B, C, D, E, F, G, H, L, X,
N, P modules.
20” or 18” 30”
36”
42”
1
/32”
$ 41.
$ 48.
$ 55.
$ 131.
Recessed Bases
Frame-type steel base
with baked enamel finish.
Recessed
11
/16”.
Includes four adjustable
leveling glides.
30”
36”
42”
1”
1
1
/2”
2
1
/4”
3
1
/4”
BA
BB
BC
BD
20” or 18”
$ 128.
$ 147.
$ 161.
PN
Note: List price upcharge is for
quantity 1 security pan.
Note: See page 29 for retrofit
interiors for existing files.
Available through Advanced Spec-A-File.
Contact Customer Care for information
Note: Interiors 9P, 9Q, 9C-LG, 9C-LT, 9M
and 9R for file drawer only in X module.
16
Meridian
®
Lateral Files Price Book (9/24)
HermanMiller
Description Part Number
9P 30” x 18” 9P0018
9P 36” x 18” 9P3618
9P 42” x 18” 9P0018
9P 30” x 20” 9P0020
9P 36” x 20” 9P3620
9P 42” x 20” 9P0020
9Q 30” x 18” 9Q3018
9Q 36”x 18” 9Q3618
9Q 42” x 18” 9Q4218
9Q 30” x 20” 9Q3020
9Q 36” x 20” 9Q3620
9Q 42” x 20” 9Q4220
9C-LT 30” x 18/20” 9C3000LT
9C-LT 36” x 18/20” 9C3600LT
9C-LT 42” x 18/20” 9C4200LT
9C-LG 30” x 18/20” 9C3000LG
9C-LG 36” x 18/20” 9C3600LG
9C-LG 42” x 18/20” 9C4200LG
9W-LT 30”/36” x 18” 9W0018LT
9W-LT 42” x 18” 9W4218LT
9W-LT 30”/36” x 20” 9W0020LT
9W-LT 42” x 20” 9W4220LT
9W-LG 30” x 18” 9W3018LG
9W-LG 36”/42” x 18” 9W0018LG
9W-LG 30” x 20” 9W3020LG
9W-LG 36”/42” x 20” 9W0020LG
9T ea All 18” 9T10018
9T ea All 20” 9T10020
9T set of 6 All 18” 9T60018
9T set of 6 All 20” 9T60020
Front-To-Back Filing
LIST PRICE
Description Part Number
9M ea All 18” 9M10018
9M ea All 20” 9M10020
9M set of 3 All 18” 9M30018
9M set of 3 All 20” 9M30020
9R ea 30” x 18/20” 9R13000
9R ea 36” x 18/20” 9R13600
9R ea 42” x 18/20” 9R14200
9R set of 2 30” x 18/20” 9R23000
9R set of 2 36” x 18/20” 9R23600
9R set of 2 42” x 18/20” 9R24200
9V 30” x 18” 9V3018
9V 36” x 18” 9V3618
9V 42” x 18” 9V4218
9V 30” x 20” 9V3020
9V 36” x 20” 9V3620
9V 42” x 20” 9V4220
9X 30” x 18/20” 9X3000
9X 36” x 18/20” 9X3600
9X 42” x 18/20” 9X4200
9Y ea 12”Hx5”Wx16”D 9Y10000
Side-To-Side Filing
LIST PRICE
The prices below are the retrofit prices
for field installing these interiors
in appropriate existing lateral file
drawers. Option includes all parts and
instructions. Be certain to specify the
”part“ number corresponding to the
width and depth of file to be fitted.
Meridian
®
Stackable
™
Lateral Files
Retrofit Interiors
* Specify paint color
$ 42.
$ 42.
$ 42.
$ 42.
$ 42.
$ 42.
$ 68.
$ 68.
$ 68.
$ 68.
$ 68.
$ 68.
$ 69.
$ 69.
$ 69.
$ 69.
$ 69.
$ 69.
$ 126.
$ 138.
$ 126.
$ 138.
$ 126.
$ 138.
$ 126.
$ 138.
$ 24.
$ 24.
$ 92.
$ 92.
$ 24.
$ 24.
$ 52.
$ 52.
$ 32.
$ 32.
$ 32.
$ 63.
$ 63.
$ 63.
$ 69.
$ 69.
$ 69.
$ 69.
$ 69.
$ 69.
$ 59.
$ 59.
$ 59.
$ 66.
Meridian
®
Lateral Files Price Book (9/24)
17
HermanMiller
Card Tray Interiors
Actual Dimension Card Size File Depth Item No. Drawer Width Trays Per Drawer
5
3
/8” w x 15
3
/8” d x 5
1
/4” h 3 x 5 18” CT-3518 30” 4
36” 6
42” 7
5
3
/8” w x 17
3
/8” d x 5
1
/4” h 20” CT-3520 30” 4
36” 6
42” 7
6
3
/8” w x 15
3
/8” d x 5
1
/4” h 4 x 6 18” CT-4618 30” 4
36” 5
42” 6
6
3
/8” w x 17
3
/8” d x 5
1
/4” h 20” CT-4620 30” 4
36” 5
42” 6
8
3
/8” w x 15
3
/8” d x 5
1
/4” h 5 x 8 18” CT-5818 30” 3
36” 3
42” 4
8
3
/8” w x 17
3
/8” d x 5
1
/4” h 20” CT-5820 30” 3
36” 3
42” 4
9
3
/8” w x 15
3
/8” d x 5
1
/4” h 4 x 9 18” CT-4918 30” 2
36” 3
42” 4
9
3
/8” w x 17
3
/8” d x 5
1
/4” h 20” CT-4920 30” 2
36” 3
42” 4
Description
Card Tray Interior
LIST PRICE
Consists of removable card tray with 2
5
1
/2” dividers for card filing. To be used
only with F modules.
Partial bottom with open center.
Card Trays (all sizes)
Meridian
®
Stackable
™
Lateral Files
Card Tray
$ 86.
18
Meridian
®
Lateral Files Price Book (9/24)
HermanMiller
A128-030318 $ 95.
A128-030320 $ 95.
A128-030518 $ 95.
A128-030520 $ 95.
A128-040618 $ 95.
A128-040620 $ 95.
A128-063518 $ 95.
A128-063520 $ 95.
9Y10809 1 $ 60.
9Y11312 1 $ 80.
9Y11509 1 $ 80.
LG901. $ 117.
Description D H W Item Number Quantity
LIST PRICE
Meridian
®
Stackable
™
Lateral Files
Accessories
Movable Magnetic Divider
Movable magnetic divider
for storage of miscellaneous
media. Side-to-side filing
only. Available in black.
Multi-Media Index Divider
Multi-media index dividers
for a variety of media types
including diskettes, CD-ROMs,
microfiche, microfilm and index
cards. Includes 2 9T front-
to-back dividers and 4 index
dividers.
3”
3”
5”
5”
6”
6”
5”
5”
8”
13”
15”
18”
20”
18”
20”
18”
20”
18”
20”
6” 12
7
/8”
9”
12”
9”
3”
3”
3”
3”
4”
4”
6”
6”
9”
File Drawer Organizer
This two-sectioned organizer fits
into any file drawer arranged for
letter-size filing. The removable
top section stores computer disks
and other small items. The bottom
section stores larger items or can
be divided into 3 compartments; it
includes 2 vertical dividers. Finish
is black umber.
Note: This organizer does not
accept letter-size file folders.
Loop Style
EnhancedAccess
TM
Pulls
These plastic loop-style pulls
slide into the standard pulls on
pedestal or lateral file drawers.
They make the drawers easier to
open. Package contains 1 pull
and attachment hardware.
For use with standard pull
modules only.
Available in:
Black Umber BU
Inner Tone Light HF
Medium Tone MT
EAP-L
$ 73.
Loop Style
Meridian
®
Lateral Files Price Book (9/24)
19
HermanMiller
20
Meridian
®
Lateral Files Price Book (9/24)
HermanMiller
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 21
Meridian
®
Lateral Files
Freestanding Stackable™ Lateral Files
Mobile Stackable™ Lateral Files
Credenza Arc/Bar Pull
File Tops
File Surrounds
Stackable™ Lateral File Accessories
Keyless Locks
22 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
===
Meridian
®
Freestanding Stackable
™
Lateral Files
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 23
Meridian
®
Standard-Pull
Freestanding Lateral File
Product Information
Description
This lateral file holds letter-, legal-, and A4-size hanging files. It has
standard pulls and smooth steel. The file has no top or a metal,
cushion, laminate, planter, or veneer top. A positive interlock system
permits only 1 drawer to open at a time. 1 lock controls all drawers.
The drawers can be specified with 3 dividers or with front-to-back or
side-to-side filing rails for hanging files. The 5-high lateral file has 4
drawers and 1 flipper door; the flipper door includes a pullout shelf
with 3 movable dividers. 5 base heights are available; all bases
include adjustable glides.
Actual lateral file widths are 29
7
/
8
", 35
7
/
8
", or 41
7
/
8
"; actual depths are
17
7
/
8
" or 19
7
/
8
".
Notes
For 2- or 3-high files that are not ganged or anchored, counterweights
(option CB) are required. For 4- or 5-high files that are not ganged or
anchored, counterweights are recommended.
When alternate drawer interior (9P, 9R, or 9M) is specified for 5-high
lateral file, pullout shelf still includes 3 movable dividers.
For base height option (LB2), legs will be shipped separately.
For base height option (LB2), overall height is 3
1
/
2
" consisting of 1
1
/
2
"
tube base with 2" legs.
Dimensional illustrations do not include all possible configurations.
To convert filing direction, order 1 of the following products
separately:
• Front-to-back rail (9Pxxxx)
• Side-to-side rail (9Rxxxxx)
See Stackable Lateral File Accessories for specific product number.
Order optional file drawer organizer (LG901) separately.
For work surface on top of 1 or more lateral files, order file top (TPL or
TPV) separately.
For cushion tops TC1 and TC2, a 1" metal top is included.
Cushion top accepts Customer’s Own Material (COM). Yardage is
estimated for nondirectional, 54"-wide fabrics. When ordering more
than 1 cushion, round up total yardage requirement to next whole
yard of fabric.
Width—Yardage
30"—1.05
36"—1.22
42"—1.40
For information on multiple quantities or directional fabrics, contact
COM Department. See Order Information in Appendices.
For keyed-alike locks, order lock plugs separately. See Keyed-Alike
Information in Appendices.
Dimensions
26-30!
26-36!
26-42!
Meridian
®
Freestanding Stackable
™
Lateral Files
===
24 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Meridian
®
Standard-Pull
Freestanding Lateral File continued
Specification Information
Step 1.
26-
Step 2. Width
30 30" wide
36 36" wide
42 42" wide
Step 3. Depth
18- 18" deep
20- 20" deep
Step 4. Configuration
2N 2 11
3
/
4
"-high drawers
3N 3 11
3
/
4
"-high drawers
4N 4 11
3
/
4
"-high drawers
5N 5 11
3
/
4
"-high drawers
5D 1 13
1
/
8
"-high flipper door and 4 11
3
/
4
"-high drawers
2E 2 13
1
/
8
"-high drawers
3E 3 13
1
/
8
"-high drawers
4E 4 13
1
/
8
"-high drawers
5F 1 13
1
/
8
"-high flipper door and 4 13
1
/
8
"-high drawers
Prices for Steps 1-4.
2N 3N 4N 5N 5D 2E
26-30 18- $1136 1576 2020 2458 2525 1136
20- $1136 1576 2020 2458 2525 1136
26-36 18- $1259 1740 2227 2710 2771 1259
20- $1259 1740 2227 2710 2771 1259
26-42 18- $1425 1969 2513 3063 3122 1425
20- $1425 1969 2513 3063 3122 1425
3E 4E 5F
26-30 18- $1576 2020 2525
20- $1576 2020 2525
26-36 18- $1740 2227 2771
20- $1740 2227 2771
26-42 18- $1969 2513 3122
20- $1969 2513 3122
Step 5. Paint/Steel Type
SS smooth paint on smooth steel +$0
XS textured paint on smooth steel +$0
Step 6. Surface Finish
Nonmetallic Paint
For smooth paint on smooth steel (SS)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) A +$0
CL cool grey neutral +$0
G2 graphite satin +$0
HF inner tone light +$0
LT light tone +$0
LU soft white +$0
MT medium tone +$0
SG slate grey +$0
WL warm stone (CP) +$0
Metallic Paint
For smooth paint on smooth steel (SS)
EH metallic bronze +$0
SNA satin aluminum +$88
SNB satin bronze +$88
SNC satin carbon +$88
Sand Texture Paint
For textured paint on smooth steel (XS)
91 white (CP) +$0
98 studio white (CP) +$0
BK black +$0
CL cool grey neutral +$0
G1 graphite (CP) +$0
WN warm grey neutral +$0
Step 7. Top
M thermally-fused laminate top/thermoplastic edge +$0
NT no top +$0
T1 1"-high painted metal top with squared edge +$0
T2 1
1
/
4
"-high painted metal top with squared edge +$0
T3 1
1
/
4
"-high painted metal top with radius edge +$74
TL +$831
1
/
4
"-high high-pressure laminate top with
thermoplastic edge
T7 6
1
/
2
"-high planter top +$222
TC1 1" cushion top +$434
TC2 2" cushion top +$434
===
Meridian
®
Freestanding Stackable
™
Lateral Files
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 25
Meridian
®
Standard-Pull
Freestanding Lateral File continued
Step 8. Veneer Top Finish
Wood Veneer
40 dark brown walnut A +$31
EW medium matte walnut A +$31
ET clear on ash A +$31
EU oak on ash A +$31
EV walnut on ash A +$31
UL natural maple A +$31
Wood Veneer
2U light brown walnut A +$31
40 dark brown walnut A +$31
EW medium matte walnut A +$31
ET clear on ash A +$31
EU oak on ash A +$31
EV walnut on ash A +$31
UL natural maple A +$31
Step 9. Top Finish
Solid-Color Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) +$0
CL cool grey neutral +$0
HF inner tone light +$0
LT light tone +$0
LU soft white +$0
WL warm stone (CP) +$0
WN warm grey neutral +$0
Twill Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
LBF neutral twill +$0
LBJ graphite twill +$0
LBQ white twill +$0
Wood-Grain Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
HP light anigre +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBR phantom ecru +$0
LBS phantom cocoa +$0
LBU medium matte walnut (CP) +$0
LBV warm grey teak +$0
76 light brown walnut +$0
For thermally‑fused laminate top/thermoplastic edge (M)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBF neutral twill +$0
LBQ white twill +$0
LBU medium matte walnut (CP) +$0
Meridian
®
Freestanding Stackable
™
Lateral Files
===
26 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Meridian
®
Standard-Pull
Freestanding Lateral File continued
Step 10. Edge Finish
For thermally‑fused laminate top/thermoplastic edge (M) or 1
1
/
4
"‑high
high‑pressure laminate top with thermoplastic edge (TL)
76 light brown walnut +$0
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) +$0
CL cool grey neutral +$0
G2 graphite satin +$0
HF inner tone light +$0
HP light anigre +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBR phantom ecru +$0
LBS phantom cocoa +$0
LBU medium matte walnut (CP) +$0
LBV warm grey teak +$0
LBF neutral twill +$0
LBJ graphite twill +$0
LBQ white twill +$0
LU soft white +$0
SG slate grey +$0
WL warm stone (CP) +$0
WN warm grey neutral +$0
Step 11. Cushion Top Fabric
For 1" cushion top (TC1)
Price Category 1 +$0
Price Category 2 +$90
Price Category 3 +$109
Price Category 4 +$134
Price Category 5 +$158
Price Category (Geiger) 5 +$158
Price Category 7 +$181
Price Category (Geiger) 7 +$181
Price Category 8 +$958
Price Category 9 +$1254
Price Category (Geiger) 10 +$1386
Price Category 10 +$877
Price Category B +$62
Price Category C +$86
Price Category D +$109
Price Category E +$131
Price Category F +$187
Price Category G +$220
Price Category H +$270
Price Category I +$349
Price Category J +$365
Price Category L +$466
Price Category M +$512
Price Category X +$1022
Price Category Y +$1075
===
Meridian
®
Freestanding Stackable
™
Lateral Files
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 27
Meridian
®
Standard-Pull
Freestanding Lateral File continued
For 2" cushion top (TC2)
Price Category 1 +$0
Price Category 2 +$90
Price Category 3 +$109
Price Category 4 +$134
Price Category 5 +$158
Price Category (Geiger) 5 +$158
Price Category 7 +$181
Price Category (Geiger) 7 +$181
Price Category 8 +$958
Price Category 9 +$1254
Price Category 10 +$877
Price Category (Geiger) 10 +$1386
Price Category B +$62
Price Category C +$86
Price Category D +$109
Price Category E +$131
Price Category F +$187
Price Category G +$220
Price Category H +$270
Price Category I +$349
Price Category J +$365
Price Category L +$466
Price Category X +$1022
Price Category Y +$1075
Step 12. Lock
KA keyed alike +$0
KC keyed differently, chrome +$0
KD keyed differently, black +$0
Step 13. Base Height
B1 1"-high base +$0
B2 1
1
/
2
"-high base +$0
B3 2
1
/
4
"-high base +$0
B4 3
1
/
4
"-high base +$0
BA 1"-high recessed base +$40
BB 1
1
/
2
"-high recessed base +$40
BC 2
1
/
4
"-high recessed base +$40
BD 3
1
/
4
"-high recessed base +$40
B5 4
1
/
4
"-high base +$40
LB2 1
1
/
2
" leg base +$40
Step 14. Leg
For 1
1
/
2
" leg base (LB2)
DD 2"-high canvas leg +$129
Step 15. Leg Finish
Metallic Paint
EH metallic bronze +$0
SNA satin aluminum +$11
SNB satin bronze +$11
SNC satin carbon +$11
Sand Texture Paint
91 white (CP) +$0
98 studio white (CP) +$0
BK black +$0
CL cool grey neutral +$0
G1 graphite (CP) +$0
WN warm grey neutral +$0
Step 16. Counterweight
NO no counterweight (must gang or anchor) +$0
CB counterweight (recommended) +$131
Step 17. Drawer Interior
9M 3 dividers +$0
9P front-to-back filing rail +$0
9R side-to-side filing rail +$0
Meridian
®
Freestanding Stackable
™
Lateral Files
===
28 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Meridian
®
Arc-Pull Freestanding
Lateral File
Product Information
Description
This lateral file holds letter-, legal-, and A4-size hanging files. It has
arc pulls and smooth steel. The file has no top or a metal, cushion,
laminate, planter, or veneer top. A positive interlock system permits
only 1 drawer to open at a time. 1 lock controls all drawers. The
drawers can be specified with 3 dividers or with front-to-back or side-
to-side filing rails for hanging files. 5 base heights are available; all
bases include adjustable glides.
Actual lateral file widths are 29
7
/
8
", 35
7
/
8
", or 41
7
/
8
"; actual depths are
17
7
/
8
" or 19
7
/
8
".
Notes
For 2- or 3-high files that are not ganged or anchored, counterweights
(option CB) are required. For 4- or 5-high files that are not ganged or
anchored, counterweights are recommended.
For base height option (LB2), legs will be shipped separately.
For base height option (LB2), overall height is 3
1
/
2
" consisting of 1
1
/
2
"
tube base with 2" legs.
Dimensional illustrations do not include all possible configurations.
To convert filing direction, order 1 of the following products
separately:
• Front-to-back rail (9Pxxxx)
• Side-to-side rail (9Rxxxxx)
See Stackable Lateral File Accessories for specific product number.
Order optional file drawer organizer (LG901) separately.
For work surface on top of 1 or more lateral files, order file top (TPL or
TPV) separately.
No lock option (NL) can only be specified on files with no top (NT),
dome tops (D1, H1, or H2), planter top (T7), laminate tops (TL), or
veneer top (TV1).
For cushion tops TC1 and TC2, a 1" metal top is included.
Grain direction is vertical for veneer-front lateral files.
Cushion top accepts Customer’s Own Material (COM). Yardage is
estimated for nondirectional, 54"-wide fabrics. When ordering more
than 1 cushion, round up total yardage requirement to next whole
yard of fabric.
Width—Yardage
30"—1.05
36"—1.22
42"—1.40
For information on multiple quantities or directional fabrics, contact
COM Department. See Order Information in Appendices.
For keyed-alike locks, order lock plugs separately. See Keyed-Alike
Information in Appendices.
The arc pull conforms to guidelines of the Americans with Disabilities
Act (ADA).
Dimensions
2D-30!
2D-36!
2D-42!
===
Meridian
®
Freestanding Stackable
™
Lateral Files
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 29
Meridian
®
Arc-Pull Freestanding
Lateral File continued
Specification Information
Step 1.
2
Step 2. Front Material
D- painted metal front
Step 3. Width
30 30" wide
36 36" wide
42 42" wide
Step 4. Depth
18- 18" deep
20- 20" deep
Step 5. Configuration
2N 2 drawers
3N 3 drawers
4N 4 drawers
5N 5 drawers
Prices for Steps 1-5.
2N 3N 4N 5N
2D-30 18- $1192 1634 2077 2521
20- $1192 1634 2077 2521
2D-36 18- $1317 1798 2284 2769
20- $1317 1798 2284 2769
2D-42 18- $1481 2028 2573 3120
20- $1481 2028 2573 3120
Step 6. Paint/Steel Type
SS smooth paint on smooth steel +$0
XS textured paint on smooth steel +$0
Step 7. Surface Finish
Nonmetallic Paint
For smooth paint on smooth steel (SS)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) A +$0
HF inner tone light +$0
LT light tone +$0
LU soft white +$0
MT medium tone +$0
SG slate grey +$0
WL warm stone (CP) +$0
Metallic Paint
For smooth paint on smooth steel (SS)
EH metallic bronze +$0
SNA satin aluminum +$88
SNB satin bronze +$88
SNC satin carbon +$88
Sand Texture Paint
For textured paint on smooth steel (XS)
91 white (CP) +$0
98 studio white (CP) A +$0
BK black +$0
CL cool grey neutral +$0
G1 graphite (CP) +$0
WN warm grey neutral +$0
Step 8. Top
M thermally-fused laminate top/thermoplastic edge +$71
NT no top +$0
T1 1"-high painted metal top with squared edge +$0
T2 1
1
/
4
"-high painted metal top with squared edge +$0
T3 1
1
/
4
"-high painted metal top with radius edge +$74
TL +$831
1
/
4
"-high high-pressure laminate top with
thermoplastic edge
T7 6
1
/
2
"-high planter top +$222
TC1 1" cushion top +$434
TC2 2" cushion top +$434
Meridian
®
Freestanding Stackable
™
Lateral Files
===
30 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Meridian
®
Arc-Pull Freestanding
Lateral File continued
Step 9. Veneer Top Finish
Wood Veneer
2U light brown walnut A +$31
40 dark brown walnut A +$31
EW medium matte walnut A +$31
ET clear on ash A +$31
EU oak on ash A +$31
EV walnut on ash A +$31
UL natural maple A +$31
Wood Veneer
40 dark brown walnut A +$31
EW medium matte walnut A +$31
ET clear on ash A +$31
EU oak on ash A +$31
EV walnut on ash A +$31
UL natural maple A +$31
Step 10. Top Finish
Solid-Color Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) +$0
CL cool grey neutral +$0
HF inner tone light +$0
LT light tone +$0
LU soft white +$0
WL warm stone (CP) +$0
WN warm grey neutral +$0
Twill Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
LBF neutral twill +$0
LBJ graphite twill +$0
LBQ white twill +$0
Wood-Grain Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
HP light anigre +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBR phantom ecru +$0
LBS phantom cocoa +$0
LBU medium matte walnut (CP) +$0
LBV warm grey teak +$0
76 light brown walnut +$0
For thermally‑fused laminate top/thermoplastic edge (M)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBF neutral twill +$0
LBQ white twill +$0
LBU medium matte walnut (CP) +$0
Step 11. Edge Finish
For thermally‑fused laminate top/thermoplastic edge (M) or 1
1
/
4
"‑high
high‑pressure laminate top with thermoplastic edge (TL)
76 light brown walnut +$0
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) +$0
CL cool grey neutral +$0
HF inner tone light +$0
HP light anigre +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBR phantom ecru +$0
LBS phantom cocoa +$0
LBU medium matte walnut (CP) +$0
LBV warm grey teak +$0
LBF neutral twill +$0
LBJ graphite twill +$0
LBQ white twill +$0
LU soft white +$0
SG slate grey +$0
WL warm stone (CP) +$0
WN warm grey neutral +$0
===
Meridian
®
Freestanding Stackable
™
Lateral Files
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 31
Meridian
®
Arc-Pull Freestanding
Lateral File continued
Step 12. Cushion Top Fabric
For 1" cushion top (TC1)
Price Category 1 +$0
Price Category 2 +$90
Price Category 3 +$109
Price Category 4 +$134
Price Category 5 +$158
Price Category (Geiger) 5 +$158
Price Category 7 +$181
Price Category (Geiger) 7 +$181
Price Category 8 +$958
Price Category 9 +$1254
Price Category 10 +$877
Price Category (Geiger) 10 +$1386
Price Category B +$62
Price Category C +$86
Price Category D +$109
Price Category E +$131
Price Category F +$187
Price Category G +$220
Price Category H +$270
Price Category I +$349
Price Category J +$365
Price Category L +$466
Price Category M +$512
Price Category X +$1022
Price Category Y +$1075
For 2" cushion top (TC2)
Price Category 1 +$0
Price Category 2 +$90
Price Category 3 +$109
Price Category 4 +$134
Price Category 5 +$158
Price Category (Geiger) 5 +$158
Price Category 7 +$181
Price Category (Geiger) 7 +$181
Price Category 8 +$958
Price Category 9 +$1254
Price Category 10 +$877
Price Category (Geiger) 10 +$1386
Price Category B +$62
Price Category C +$86
Price Category D +$109
Price Category E +$131
Price Category F +$187
Price Category G +$220
Price Category H +$270
Price Category I +$349
Price Category J +$365
Price Category L +$466
Price Category X +$1022
Price Category Y +$1075
Step 13. Lock
For thermally‑fused laminate top/thermoplastic edge (M), no top (NT),
1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL), or
6
1
/
2
"‑high planter top (T7)
NL no lock -$27
For 1"‑high painted metal top with squared edge (T1), 1
1
/
4
"‑high
painted metal top with squared edge (T2), 1
1
/
4
"‑high painted metal top
with radius edge (T3), 1" cushion top (TC1), or 2" cushion top (TC2)
KA keyed alike +$0
KC keyed differently, chrome +$0
KD keyed differently, black +$0
Step 14. Pull Finish
NH brushed nickel +$0
NK black nickel +$0
Meridian
®
Freestanding Stackable
™
Lateral Files
===
32 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Meridian
®
Arc-Pull Freestanding
Lateral File continued
Step 15. Base Height
B1 1"-high base +$0
B2 1
1
/
2
"-high base +$0
B3 2
1
/
4
"-high base +$0
B4 3
1
/
4
"-high base +$0
BA 1"-high recessed base +$40
BB 1
1
/
2
"-high recessed base +$40
BC 2
1
/
4
"-high recessed base +$40
BD 3
1
/
4
"-high recessed base +$40
B5 4
1
/
4
"-high base +$40
LB2 1
1
/
2
" leg base +$40
Step 16. Leg
For 1
1
/
2
" leg base (LB2)
DD 2"-high canvas leg +$129
Step 17. Leg Finish
Sand Texture Paint
91 white (CP) +$0
BK black +$0
CL cool grey neutral +$0
G1 graphite (CP) +$0
WN warm grey neutral +$0
Metallic Paint
EH metallic bronze +$0
SNA satin aluminum +$11
SNB satin bronze +$11
SNC satin carbon +$11
Step 18. Counterweight
NO no counterweight (must gang or anchor) +$0
CB counterweight (recommended) +$131
Step 19. Drawer Interior
9P front-to-back filing rail +$0
9R side-to-side filing rail +$0
9M 3 dividers +$0
===
Meridian
®
Freestanding Stackable
™
Lateral Files
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 33
Meridian
®
Bar-Pull Freestanding
Lateral File
Product Information
Description
This lateral file holds letter-, legal-, and A4-size hanging files. It has
bar pulls and smooth steel. The file has no top or a metal, cushion,
laminate, planter, or veneer top. A positive interlock system permits
only 1 drawer to open at a time. 1 lock controls all drawers. The
drawers can be specified with 3 dividers or with front-to-back or side-
to-side filing rails for hanging files. 5 base heights are available; all
bases include adjustable glides.
Actual lateral file widths are 29
7
/
8
", 35
7
/
8
", or 41
7
/
8
"; actual depths are
17
7
/
8
" or 19
7
/
8
".
Notes
For 2- or 3-high files that are not ganged or anchored, counterweights
(option CB) are required. For 4- or 5-high files that are not ganged or
anchored, counterweights are recommended.
For base height option (LB2), legs will be shipped separately.
For base height option (LB2), overall height is 3
1
/
2
" consisting of 1
1
/
2
"
tube base with 2" legs.
Dimensional illustrations do not include all possible configurations.
To convert filing direction, order 1 of the following products
separately:
• Front-to-back rail (9Pxxxx)
• Side-to-side rail (9Rxxxxx)
See Stackable Lateral File Accessories for specific product number.
Order optional file drawer organizer (LG901) separately.
For work surface on top of 1 or more lateral files, order file top (TPL or
TPV) separately.
No lock option (NL) can only be specified on files with no top (NT),
dome tops (D1, H1, or H2), planter top (T7), laminate tops (TL), or
veneer top (TV1).
For cushion tops TC1 and TC2, a 1" metal top is included.
Grain direction is vertical for veneer-front lateral files.
Cushion top accepts Customer’s Own Material (COM). Yardage is
estimated for nondirectional, 54"-wide fabrics. When ordering more
than 1 cushion, round up total yardage requirement to next whole
yard of fabric.
Width—Yardage
30"—1.05
36"—1.22
42"—1.40
For information on multiple quantities or directional fabrics, contact
COM Department. See Order Information in Appendices.
For keyed-alike locks, order lock plugs separately. See Keyed-Alike
Information in Appendices.
Dimensions
2KP-3!
2KP-4!
Meridian
®
Freestanding Stackable
™
Lateral Files
===
34 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Meridian
®
Bar-Pull Freestanding
Lateral File continued
Specification Information
Step 1.
2K
Step 2. Front Material
P- painted metal front
Step 3. Width
30 30" wide
36 36" wide
42 42" wide
Step 4. Depth
18- 18" deep
20- 20" deep
Step 5. Configuration
2N 2 drawers
3N 3 drawers
4N 4 drawers
5N 5 drawers
Prices for Steps 1-5.
2N 3N 4N 5N
2KP-30 18- $1189 1634 2077 2521
20- $1189 1634 2077 2521
2KP-36 18- $1317 1798 2284 2769
20- $1317 1798 2284 2769
2KP-42 18- $1481 2028 2573 3122
20- $1481 2028 2573 3122
Step 6. Paint/Steel Type
SS smooth paint on smooth steel +$0
XS textured paint on smooth steel +$0
Step 7. Surface Finish
Nonmetallic Paint
For smooth paint on smooth steel (SS)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) A +$0
G2 graphite satin +$0
HF inner tone light +$0
LT light tone +$0
LU soft white +$0
MT medium tone +$0
SG slate grey +$0
WL warm stone (CP) +$0
Metallic Paint
For smooth paint on smooth steel (SS)
EH metallic bronze +$0
SNA satin aluminum +$88
SNB satin bronze +$88
SNC satin carbon +$88
Sand Texture Paint
For textured paint on smooth steel (XS)
91 white (CP) +$0
98 studio white (CP) A +$0
BK black +$0
CL cool grey neutral +$0
G1 graphite (CP) +$0
WN warm grey neutral +$0
Step 8. Top
M thermally-fused laminate top/thermoplastic edge +$0
NT no top +$0
T1 1"-high painted metal top with squared edge +$0
T2 1
1
/
4
"-high painted metal top with squared edge +$0
T3 1
1
/
4
"-high painted metal top with radius edge +$74
TL +$831
1
/
4
"-high high-pressure laminate top with
thermoplastic edge
T7 6
1
/
2
"-high planter top +$222
TC1 1" cushion top +$434
TC2 2" cushion top +$434
===
Meridian
®
Freestanding Stackable
™
Lateral Files
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 35
Meridian
®
Bar-Pull Freestanding
Lateral File continued
Step 9. Veneer Top Finish
Wood Veneer
2U light brown walnut A +$31
40 dark brown walnut A +$31
EW medium matte walnut A +$31
ET clear on ash A +$31
EV walnut on ash A +$31
UL natural maple A +$31
Wood Veneer
40 dark brown walnut A +$31
EW medium matte walnut A +$31
ET clear on ash A +$31
EV walnut on ash A +$31
UL natural maple A +$31
Step 10. Top Finish
Solid-Color Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) +$0
CL cool grey neutral +$0
HF inner tone light +$0
LT light tone +$0
LU soft white +$0
WL warm stone (CP) +$0
WN warm grey neutral +$0
Twill Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
LBF neutral twill +$0
LBJ graphite twill +$0
LBQ white twill +$0
Wood-Grain Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
HP light anigre +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBR phantom ecru +$0
LBS phantom cocoa +$0
LBU medium matte walnut (CP) +$0
LBV warm grey teak +$0
76 light brown walnut +$0
For thermally‑fused laminate top/thermoplastic edge (M)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBF neutral twill +$0
LBQ white twill +$0
LBU medium matte walnut (CP) +$0
Meridian
®
Freestanding Stackable
™
Lateral Files
===
36 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Meridian
®
Bar-Pull Freestanding
Lateral File continued
Step 11. Edge Finish
For thermally‑fused laminate top/thermoplastic edge (M) or 1
1
/
4
"‑high
high‑pressure laminate top with thermoplastic edge (TL)
76 light brown walnut +$0
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) +$0
CL cool grey neutral +$0
G2 graphite satin +$0
HF inner tone light +$0
HP light anigre +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBR phantom ecru +$0
LBS phantom cocoa +$0
LBU medium matte walnut (CP) +$0
LBV warm grey teak +$0
LBF neutral twill +$0
LBJ graphite twill +$0
LBQ white twill +$0
LU soft white +$0
SG slate grey +$0
WL warm stone (CP) +$0
WN warm grey neutral +$0
Step 12. Cushion Top Fabric
For 1" cushion top (TC1)
Price Category 1 +$0
Price Category 2 +$90
Price Category 3 +$109
Price Category 4 +$134
Price Category 5 +$158
Price Category (Geiger) 5 +$158
Price Category 7 +$181
Price Category (Geiger) 7 +$181
Price Category 8 +$958
Price Category 9 +$1254
Price Category 10 +$877
Price Category (Geiger) 10 +$1386
Price Category B +$58
Price Category C +$86
Price Category D +$100
Price Category E +$119
Price Category F +$152
Price Category G +$200
Price Category H +$245
Price Category I +$287
Price Category J +$330
Price Category L +$466
Price Category M +$512
Price Category X +$1022
Price Category Y +$1075
===
Meridian
®
Freestanding Stackable
™
Lateral Files
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 37
Meridian
®
Bar-Pull Freestanding
Lateral File continued
For 2" cushion top (TC2)
Price Category 1 +$0
Price Category 2 +$90
Price Category 3 +$109
Price Category 4 +$134
Price Category 5 +$158
Price Category (Geiger) 5 +$158
Price Category 7 +$181
Price Category (Geiger) 7 +$181
Price Category 8 +$958
Price Category 9 +$1254
Price Category 10 +$877
Price Category (Geiger) 10 +$1386
Price Category B +$58
Price Category C +$86
Price Category D +$100
Price Category E +$119
Price Category F +$152
Price Category G +$200
Price Category H +$245
Price Category I +$287
Price Category J +$330
Price Category L +$466
Price Category X +$1022
Price Category Y +$1075
Step 13. Lock
For thermally‑fused laminate top/thermoplastic edge (M), no top (NT),
1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL), or
6
1
/
2
"‑high planter top (T7)
NL no lock -$27
For 1"‑high painted metal top with squared edge (T1), 1
1
/
4
"‑high
painted metal top with squared edge (T2), 1
1
/
4
"‑high painted metal top
with radius edge (T3), 1" cushion top (TC1), or 2" cushion top (TC2)
KA keyed alike +$0
KC keyed differently, chrome +$0
KD keyed differently, black +$0
Step 14. Pull Finish
Metallic Paint
SNA satin aluminum +$11
SNB satin bronze +$11
SNC satin carbon +$11
Sand Texture Paint
DB3 glacier +$10
DN2 nightfall +$10
DR1 canyon +$10
OLF olive +$10
BK black +$0
Smooth Paint
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) +$0
G1 graphite (CP) +$0
WL warm stone (CP) +$0
Step 15. Base Height
B1 1"-high base +$0
B2 1
1
/
2
"-high base +$0
B3 2
1
/
4
"-high base +$0
B4 3
1
/
4
"-high base +$0
BA 1"-high recessed base +$40
BB 1
1
/
2
"-high recessed base +$40
BC 2
1
/
4
"-high recessed base +$40
BD 3
1
/
4
"-high recessed base +$40
B5 4
1
/
4
"-high base +$40
LB2 1
1
/
2
" leg base +$40
Step 16. Leg
For 1
1
/
2
" leg base (LB2)
DD 2"-high canvas leg +$129
Step 17. Leg Finish
Sand Texture Paint
91 white (CP) +$0
98 studio white (CP) +$0
BK black +$0
CL cool grey neutral +$0
G1 graphite (CP) +$0
WN warm grey neutral +$0
Metallic Paint
EH metallic bronze +$0
SNA satin aluminum +$11
SNB satin bronze +$11
SNC satin carbon +$11
Meridian
®
Freestanding Stackable
™
Lateral Files
===
38 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Meridian
®
Bar-Pull Freestanding
Lateral File continued
Step 18. Counterweight
NO no counterweight (must gang or anchor) +$0
CB counterweight (recommended) +$131
Step 19. Drawer Interior
9P front-to-back filing rail +$0
9R side-to-side filing rail +$0
9M 3 dividers +$0
===
Meridian
®
Freestanding Stackable
™
Lateral Files
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 39
Meridian
®
Bevel-Pull
Freestanding Lateral File
Product Information
Description
This lateral file holds letter-, legal-, and A4-size hanging files. It has
bevel pulls and smooth steel. The file has no top or a metal, cushion,
laminate, planter, or veneer top. A positive interlock system permits
only 1 drawer to open at a time. 1 lock controls all drawers. The
drawers can be specified with 3 dividers or with front-to-back or side-
to-side filing rails for hanging files. 5 base heights are available; all
bases include adjustable glides.
Actual lateral file widths are 29
7
/
8
", 35
7
/
8
", or 41
7
/
8
"; actual depths are
17
7
/
8
" or 19
7
/
8
".
Notes
For 2- or 3-high files that are not ganged or anchored, counterweights
(option CB) are required. For 4- or 5-high files that are not ganged or
anchored, counterweights are recommended.
Dimensional illustrations do not include all possible configurations.
To convert filing direction, order 1 of the following products
separately:
• Front-to-back rail (9Pxxxx)
• Side-to-side rail (9Rxxxxx)
See Stackable Lateral File Accessories for specific product number.
Order optional file drawer organizer (LG901) separately.
For work surface on top of 1 or more lateral files, order file top (TPL or
TPV) separately.
No lock option (NL) can only be specified on files with no top (NT),
dome tops (D1, H1, or H2), planter top (T7), laminate tops (TL), or
veneer top (TV1).
For cushion tops TC1 and TC2, a 1" metal top is included.
Cushion top accepts Customer’s Own Material (COM). Yardage is
estimated for nondirectional, 54"-wide fabrics. When ordering more
than 1 cushion, round up total yardage requirement to next whole
yard of fabric.
Width—Yardage
30"—1.05
36"—1.22
42"—1.40
For information on multiple quantities or directional fabrics, contact
COM Department. See Order Information in Appendices.
For keyed-alike locks, order lock plugs separately. See Keyed-Alike
Information in Appendices.
Dimensions
24-30!
24-36!
24-42!
Meridian
®
Freestanding Stackable
™
Lateral Files
===
40 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Meridian
®
Bevel-Pull
Freestanding Lateral File continued
Specification Information
Step 1.
24-
Step 2. Width
30 30" wide
36 36" wide
42 42" wide
Step 3. Depth
18- 18" deep
20- 20" deep
Step 4. Configuration
2N 2 11
3
/
4
"-high drawers
3N 3 11
3
/
4
"-high drawers
4N 4 11
3
/
4
"-high drawers
5N 5 11
3
/
4
"-high drawers
2E 2 13
1
/
8
"-high drawers
3E 3 13
1
/
8
"-high drawers
4E 4 13
1
/
8
"-high drawers
Prices for Steps 1-4.
2N 3N 4N 5N 2E 3E
24-30 18- $1136 1576 2020 2458 1136 1576
20- $1136 1576 2020 2458 1136 1576
24-36 18- $1259 1740 2227 2710 1259 1740
20- $1259 1740 2227 2710 1259 1740
24-42 18- $1425 1969 2513 3063 1425 1969
20- $1425 1969 2513 3063 1425 1969
4E
24-30 18- $2020
20- $2020
24-36 18- $2227
20- $2227
24-42 18- $2513
20- $2513
Step 5. Paint/Steel Type
SS smooth paint on smooth steel +$0
XS textured paint on smooth steel +$0
Step 6. Surface Finish
Nonmetallic Paint
For smooth paint on smooth steel (SS)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) A +$0
HF inner tone light +$0
LT light tone +$0
LU soft white +$0
MT medium tone +$0
SG slate grey +$0
WL warm stone (CP) +$0
Metallic Paint
For smooth paint on smooth steel (SS)
EH metallic bronze +$0
SNA satin aluminum +$88
SNB satin bronze +$88
SNC satin carbon +$88
Sand Texture Paint
For textured paint on smooth steel (XS)
91 white (CP) +$0
98 studio white (CP) +$0
BK black +$0
CL cool grey neutral +$0
G1 graphite (CP) +$0
WN warm grey neutral +$0
Step 7. Top
M thermally-fused laminate top/thermoplastic edge +$0
NT no top +$0
T1 1"-high painted metal top with squared edge +$0
T2 1
1
/
4
"-high painted metal top with squared edge +$0
T3 1
1
/
4
"-high painted metal top with radius edge +$74
TL +$831
1
/
4
"-high high-pressure laminate top with
thermoplastic edge
T7 6
1
/
2
"-high planter top +$222
TC1 1" cushion top +$434
TC2 2" cushion top +$434
===
Meridian
®
Freestanding Stackable
™
Lateral Files
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 41
Meridian
®
Bevel-Pull
Freestanding Lateral File continued
Step 8. Lock
For thermally‑fused laminate top/thermoplastic edge (M), no top (NT),
1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL), or
6
1
/
2
"‑high planter top (T7)
NL no lock -$27
For 1"‑high painted metal top with squared edge (T1), 1
1
/
4
"‑high
painted metal top with squared edge (T2), 1
1
/
4
"‑high painted metal top
with radius edge (T3), 1" cushion top (TC1), or 2" cushion top (TC2)
KA keyed alike +$0
KC keyed differently, chrome +$0
KD keyed differently, black +$0
Step 9.
Veneer Top Finish: Wood Veneer
2U light brown walnut A +$31
40 dark brown walnut A +$31
EW medium matte walnut A +$31
ET clear on ash A +$31
EU oak on ash A +$31
EV walnut on ash A +$31
UL natural maple A +$31
Veneer Top Finish: Wood Veneer
40 dark brown walnut A +$31
EW medium matte walnut A +$31
ET clear on ash A +$31
EU oak on ash A +$31
EV walnut on ash A +$31
UL natural maple A +$31
Top Finish: Solid-Color Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) +$0
CL cool grey neutral +$0
HF inner tone light +$0
LT light tone +$0
LU soft white +$0
WL warm stone (CP) +$0
WN warm grey neutral +$0
Top Finish: Twill Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
LBF neutral twill +$0
LBJ graphite twill +$0
LBQ white twill +$0
Top Finish: Wood-Grain Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
HP light anigre +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBR phantom ecru +$0
LBS phantom cocoa +$0
LBU medium matte walnut (CP) +$0
LBV warm grey teak +$0
76 light brown walnut +$0
Top Finish
For thermally‑fused laminate top/thermoplastic edge (M)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBF neutral twill +$0
LBQ white twill +$0
LBU medium matte walnut (CP) +$0
Meridian
®
Freestanding Stackable
™
Lateral Files
===
42 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Meridian
®
Bevel-Pull
Freestanding Lateral File continued
Step 10. Edge Finish
For thermally‑fused laminate top/thermoplastic edge (M) or 1
1
/
4
"‑high
high‑pressure laminate top with thermoplastic edge (TL)
76 light brown walnut +$0
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) +$0
CL cool grey neutral +$0
HF inner tone light +$0
HP light anigre +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBR phantom ecru +$0
LBS phantom cocoa +$0
LBU medium matte walnut (CP) +$0
LBV warm grey teak +$0
LBF neutral twill +$0
LBJ graphite twill +$0
LBQ white twill +$0
LU soft white +$0
SG slate grey +$0
WL warm stone (CP) +$0
WN warm grey neutral +$0
Step 11. Cushion Top Fabric
For 1" cushion top (TC1)
Price Category 1 +$0
Price Category 2 +$90
Price Category 3 +$109
Price Category 4 +$134
Price Category 5 +$158
Price Category (Geiger) 5 +$158
Price Category 7 +$181
Price Category (Geiger) 7 +$181
Price Category 8 +$958
Price Category 9 +$1254
Price Category 10 +$877
Price Category (Geiger) 10 +$1386
Price Category B +$62
Price Category C +$86
Price Category D +$109
Price Category E +$131
Price Category F +$187
Price Category G +$220
Price Category H +$270
Price Category I +$349
Price Category J +$365
Price Category L +$466
Price Category M +$512
Price Category X +$1022
Price Category Y +$1075
===
Meridian
®
Freestanding Stackable
™
Lateral Files
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 43
Meridian
®
Bevel-Pull
Freestanding Lateral File continued
For 2" cushion top (TC2)
Price Category 1 +$0
Price Category 2 +$90
Price Category 3 +$109
Price Category 4 +$134
Price Category 5 +$158
Price Category (Geiger) 5 +$158
Price Category 7 +$181
Price Category (Geiger) 7 +$181
Price Category 8 +$958
Price Category 9 +$1254
Price Category 10 +$877
Price Category (Geiger) 10 +$1386
Price Category B +$62
Price Category C +$86
Price Category D +$109
Price Category E +$131
Price Category F +$187
Price Category G +$220
Price Category H +$270
Price Category I +$349
Price Category J +$365
Price Category L +$466
Price Category X +$1022
Price Category Y +$1075
Step 12. Base Height
B1 1"-high base +$0
B2 1
1
/
2
"-high base +$0
B3 2
1
/
4
"-high base +$0
B4 3
1
/
4
"-high base +$0
BA 1"-high recessed base +$40
BB 1
1
/
2
"-high recessed base +$40
BC 2
1
/
4
"-high recessed base +$40
BD 3
1
/
4
"-high recessed base +$40
B5 4
1
/
4
"-high base +$40
Step 13. Counterweight
NO no counterweight (must gang or anchor) +$0
CB counterweight (recommended) +$131
Step 14. Drawer Interior
9P front-to-back filing rail +$0
9R side-to-side filing rail +$0
9M 3 dividers +$0
Meridian
®
Freestanding Stackable
™
Lateral Files
===
44 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Meridian
®
Ellipse-Pull
Freestanding Lateral File
Product Information
Description
This lateral file holds letter-, legal-, and A4-size hanging files. It
has ellipse pulls and smooth steel. The file has no top or a metal,
cushion, laminate, planter, or veneer top. A positive interlock system
permits only 1 drawer to open at a time. 1 lock controls all drawers.
The drawers can be specified with 3 dividers or with front-to-back or
side-to-side filing rails for hanging files. 5 base heights are available;
all bases include adjustable glides.
Actual lateral file widths are 29
7
/
8
", 35
7
/
8
", or 41
7
/
8
"; actual depths are
17
7
/
8
" or 19
7
/
8
".
Notes
For 2- or 3-high files that are not ganged or anchored, counterweights
(option CB) are required. For 4- or 5-high files that are not ganged or
anchored, counterweights are recommended.
Dimensional illustrations do not include all possible configurations.
To convert filing direction, order 1 of the following products
separately:
• Front-to-back rail (9Pxxxx)
• Side-to-side rail (9Rxxxxx)
See Stackable Lateral File Accessories for specific product number.
Order optional file drawer organizer (LG901) separately.
For work surface on top of 1 or more lateral files, order file top (TPL or
TPV) separately.
No lock option (NL) can only be specified on files with no top (NT),
dome tops (D1, H1, or H2), planter top (T7), or laminate tops (TL). The
(NL) option cannot be specified for configurations 4W and 4Z; these
configurations always have a lock.
For configurations 4W and 4Z, a 1" filler top is included between the
overhead storage and the drawers.
For cushion tops TC1 and TC2, a 1" metal top is included.
Cushion top accepts Customer’s Own Material (COM). Yardage is
estimated for nondirectional, 54"-wide fabrics. When ordering more
than 1 cushion, round up total yardage requirement to next whole
yard of fabric.
Width—Yardage
30"—1.05
36"—1.22
42"—1.40
For information on multiple quantities or directional fabrics, contact
COM Department. See Order Information in Appendices.
For keyed-alike locks, order lock plugs separately. See Keyed-Alike
Information in Appendices.
Dimensions
2J-30!
2J-36!
2J-42!
===
Meridian
®
Freestanding Stackable
™
Lateral Files
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 45
Meridian
®
Ellipse-Pull
Freestanding Lateral File continued
Specification Information
Step 1.
2J- A
Step 2. Width
30 30" wide A
36 36" wide A
42 42" wide A
Step 3. Depth
18- 18" deep A
20- 20" deep A
Step 4. Configuration
2N 2 11
3
/
4
"-high drawers A
3N 3 11
3
/
4
"-high drawers A
4N 4 11
3
/
4
"-high drawers A
4W 1 26
1
/
4
"-high overhead storage, 3 11
3
/
4
"-high drawers A
5N 5 11
3
/
4
"-high drawers A
2E 2 13
1
/
8
"-high drawers A
3E 3 13
1
/
8
"-high drawers A
4E 4 13
1
/
8
"-high drawers A
4Z 1 26
1
/
4
"-high overhead storage, 3 13
1
/
8
"-high drawers A
Prices for Steps 1-4.
2N 3N 4N 4W 5N 2E
2J-30 18- $1242 1734 2222 2739 2707 1242
20- $1242 1734 2222 2739 2707 1242
2J-36 18- $1382 1914 2445 3055 2978 1382
20- $1382 1914 2445 3055 2978 1382
2J-42 18- $1566 2165 2764 3460 3366 1566
20- $1566 2165 2764 3460 3366 1566
3E 4E 4Z
2J-30 18- $1734 2222 2739
20- $1734 2222 2739
2J-36 18- $1914 2445 3055
20- $1914 2445 3055
2J-42 18- $2165 2764 3460
20- $2165 2764 3460
Step 5. Paint/Steel Type
SS smooth paint on smooth steel A +$0
XS textured paint on smooth steel A +$0
Step 6. Case Finish
Nonmetallic Paint
For smooth paint on smooth steel (SS)
8Q folkstone grey (CP) A +$0
91 white (CP) A +$0
98 studio white (CP) A +$0
G2 graphite satin A +$0
HF inner tone light A +$0
LT light tone A +$0
LU soft white A +$0
MT medium tone A +$0
SG slate grey A +$0
WL warm stone (CP) A +$0
Metallic Paint
For smooth paint on smooth steel (SS)
EH metallic bronze A +$0
SNA satin aluminum +$88
SNB satin bronze +$88
SNC satin carbon +$88
Sand Texture Paint
For textured paint on smooth steel (XS)
91 white (CP) A +$0
BK black A +$0
CL cool grey neutral A +$0
G1 graphite (CP) A +$0
WN warm grey neutral A +$0
98 studio white (CP) A +$0
Meridian
®
Freestanding Stackable
™
Lateral Files
===
46 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Meridian
®
Ellipse-Pull
Freestanding Lateral File continued
Step 7. Front Finish
Nonmetallic Paint
For smooth paint on smooth steel (SS)
8Q folkstone grey (CP) A +$0
91 white (CP) A +$0
98 studio white (CP) A +$0
G2 graphite satin A +$0
HF inner tone light A +$0
LT light tone A +$0
LU soft white A +$0
MT medium tone A +$0
SG slate grey A +$0
WL warm stone (CP) A +$0
Metallic Paint
For smooth paint on smooth steel (SS)
EH metallic bronze A +$0
SNA satin aluminum +$33
SNB satin bronze +$33
SNC satin carbon +$33
Sand Texture Paint
For textured paint on smooth steel (XS)
91 white (CP) A +$0
98 studio white (CP) A +$0
BK black A +$0
CL cool grey neutral A +$0
G1 graphite (CP) A +$0
WN warm grey neutral A +$0
Step 8. Top
M thermally-fused laminate top/thermoplastic edge A +$71
NT no top A +$0
T1 1"-high painted metal top with squared edge A +$0
T2 1
1
/
4
"-high painted metal top with squared edge A +$0
T3 1
1
/
4
"-high painted metal top with radius edge A +$74
TL +$831
1
/
4
"-high high-pressure laminate top with
thermoplastic edge A
T7 6
1
/
2
"-high planter top A +$222
TC1 1" cushion top A +$434
TC2 2" cushion top A +$434
Step 9. Lock
For 1 26
1
/
4
"‑high overhead storage, 3 11
3
/
4
"‑high drawers (4W) or
1 26
1
/
4
"‑high overhead storage, 3 13
1
/
8
"‑high drawers (4Z) with
thermally‑fused laminate top/thermoplastic edge (M), no top (NT),
1"‑high painted metal top with squared edge (T1), 1
1
/
4
"‑high painted
metal top with squared edge (T2), 1
1
/
4
"‑high painted metal top
with radius edge (T3), 1
1
/
4
"‑high high‑pressure laminate top with
thermoplastic edge (TL), or 6
1
/
2
"‑high planter top (T7), or 1" cushion
top (TC1), or 2" cushion top (TC2)
KA keyed alike A +$0
KC keyed differently, chrome A +$0
KD keyed differently, black A +$0
For 2 11
3
/
4
"‑high drawers (2N), 3 11
3
/
4
"‑high drawers (3N), 4 11
3
/
4
"‑high
drawers (4N), 5 11
3
/
4
"‑high drawers (5N), 2 13
1
/
8
"‑high drawers
(2E), 3 13
1
/
8
"‑high drawers (3E), or 4 13
1
/
8
"‑high drawers (4E) with
thermally‑fused laminate top/thermoplastic edge (M), or no top (NT),
or 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL),
or 6
1
/
2
"‑high planter top (T7)
NL no lock A -$27
For 2 11
3
/
4
"‑high drawers (2N), 3 11
3
/
4
"‑high drawers (3N), 4 11
3
/
4
"‑high
drawers (4N), 5 11
3
/
4
"‑high drawers (5N), 2 13
1
/
8
"‑high drawers (2E),
3 13
1
/
8
"‑high drawers (3E), or 4 13
1
/
8
"‑high drawers (4E) with 1"‑high
painted metal top with squared edge (T1), or 1
1
/
4
"‑high painted metal
top with squared edge (T2), or 1
1
/
4
"‑high painted metal top with radius
edge (T3), or 1" cushion top (TC1), or 2" cushion top (TC2)
KA keyed alike A +$0
KC keyed differently, chrome A +$0
KD keyed differently, black A +$0
Step 10.
Veneer Top Finish: Wood Veneer
2U light brown walnut A +$31
40 dark brown walnut A +$31
EW medium matte walnut A +$31
ET clear on ash A +$31
EU oak on ash A +$31
EV walnut on ash A +$31
UL natural maple A +$31
===
Meridian
®
Freestanding Stackable
™
Lateral Files
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 47
Meridian
®
Ellipse-Pull
Freestanding Lateral File continued
Top Finish: Solid-Color Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
8Q folkstone grey (CP) A +$0
91 white (CP) A +$0
98 studio white (CP) +$0
CL cool grey neutral A +$0
HF inner tone light A +$0
LT light tone A +$0
LU soft white A +$0
WL warm stone (CP) A +$0
WN warm grey neutral A +$0
Top Finish: Twill Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
LBF neutral twill +$0
LBJ graphite twill +$0
LBQ white twill +$0
Top Finish: Wood-Grain Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
HP light anigre A +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBR phantom ecru +$0
LBS phantom cocoa +$0
LBU medium matte walnut (CP) +$0
LBV warm grey teak +$0
76 light brown walnut A +$0
Top Finish
For thermally‑fused laminate top/thermoplastic edge (M)
8Q folkstone grey (CP) A +$0
91 white (CP) A +$0
98 studio white (CP) A +$0
LBA clear on ash (CP) A +$0
LBB oak on ash (CP) A +$0
LBC walnut on ash (CP) A +$0
LBF neutral twill A +$0
LBQ white twill A +$0
LBU medium matte walnut (CP) A +$0
Veneer Top Finish: Wood Veneer
40 dark brown walnut A +$31
EW medium matte walnut A +$31
ET clear on ash A +$31
EU oak on ash A +$31
EV walnut on ash A +$31
UL natural maple A +$31
Step 11. Edge Finish
For thermally‑fused laminate top/thermoplastic edge (M) or 1
1
/
4
"‑high
high‑pressure laminate top with thermoplastic edge (TL)
76 light brown walnut A +$0
8Q folkstone grey (CP) A +$0
91 white (CP) A +$0
98 studio white (CP) +$0
CL cool grey neutral A +$0
G2 graphite satin A +$0
HF inner tone light A +$0
HP light anigre A +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBR phantom ecru +$0
LBS phantom cocoa +$0
LBU medium matte walnut (CP) +$0
LBV warm grey teak +$0
LBF neutral twill +$0
LBJ graphite twill +$0
LBQ white twill +$0
LU soft white A +$0
SG slate grey A +$0
WL warm stone (CP) A +$0
WN warm grey neutral A +$0
Meridian
®
Freestanding Stackable
™
Lateral Files
===
48 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Meridian
®
Ellipse-Pull
Freestanding Lateral File continued
Step 12. Cushion Top Fabric
For 1" cushion top (TC1)
Price Category 1 +$0
Price Category 2 +$90
Price Category 3 +$109
Price Category 4 +$134
Price Category 5 +$158
Price Category (Geiger) 5 +$158
Price Category 7 +$181
Price Category (Geiger) 7 +$181
Price Category 8 +$958
Price Category 9 +$1254
Price Category 10 +$877
Price Category (Geiger) 10 +$1386
Price Category B +$62
Price Category C +$86
Price Category D +$109
Price Category E +$131
Price Category F +$187
Price Category G +$220
Price Category H +$270
Price Category I +$280
Price Category J +$365
Price Category L +$466
Price Category M +$512
Price Category X +$1022
Price Category Y +$1075
For 2" cushion top (TC2)
Price Category 1 +$0
Price Category 2 +$90
Price Category 3 +$109
Price Category 4 +$134
Price Category 5 +$158
Price Category (Geiger) 5 +$158
Price Category 7 +$181
Price Category (Geiger) 7 +$181
Price Category 8 +$958
Price Category 9 +$1254
Price Category 10 +$877
Price Category (Geiger) 10 +$1386
Price Category B +$62
Price Category C +$86
Price Category D +$109
Price Category E +$131
Price Category F +$187
Price Category G +$220
Price Category H +$270
Price Category I +$280
Price Category J +$365
Price Category L +$466
Price Category X +$1022
Price Category Y +$1075
Step 13. Base Height
B1 1"-high base A +$0
B2 1
1
/
2
"-high base A +$0
B3 2
1
/
4
"-high base A +$0
B4 3
1
/
4
"-high base A +$0
BA 1"-high recessed base A +$40
BB 1
1
/
2
"-high recessed base A +$40
BC 2
1
/
4
"-high recessed base A +$40
BD 3
1
/
4
"-high recessed base A +$40
B5 4
1
/
4
"-high base A +$40
Step 14. Counterweight
NO no counterweight (must gang or anchor) A +$0
CB counterweight (recommended) A +$131
Step 15. Drawer Interior
9P front-to-back filing rail A +$0
9R side-to-side filing rail A +$0
9M 3 dividers A +$0
===
Meridian
®
Freestanding Stackable
™
Lateral Files
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 49
Meridian
®
Ellipse-Pull
Freestanding Lateral File continued
Step 16. Overhead Interior
For 1 26
1
/
4
"‑high overhead storage, 3 11
3
/
4
"‑high drawers (4W) or 1
26
1
/
4
"‑high overhead storage, 3 13
1
/
8
"‑high drawers (4Z)
NS0 no interior option A -$30
NS1 1 shelf total A +$0
NS2 2 shelves total A +$37
Meridian
®
Freestanding Stackable
™
Lateral Files
===
50 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Meridian
®
Sloped-Pull
Freestanding Lateral File
Product Information
Description
This lateral file holds letter-, legal-, and A4-size hanging files. It
has sloped pulls and smooth steel. The file has no top or a metal,
cushion, laminate, planter, or veneer top. A positive interlock system
permits only 1 drawer to open at a time. 1 lock controls all drawers.
The drawers can be specified with 3 dividers or with front-to-back or
side-to-side filing rails for hanging files. 5 base heights are available;
all bases include adjustable glides.
Actual lateral file widths are 29
7
/
8
", 35
7
/
8
", or 41
7
/
8
"; actual depths are
17
7
/
8
" or 19
7
/
8
".
Notes
For 2- or 3-high files that are not ganged or anchored, counterweights
(option CB) are required. For 4- or 5-high files that are not ganged or
anchored, counterweights are recommended.
Dimensional illustrations do not include all possible configurations.
To convert filing direction, order 1 of the following products
separately:
• Front-to-back rail (9Pxxxx)
• Side-to-side rail (9Rxxxxx)
See Stackable Lateral File Accessories for specific product number.
Order optional file drawer organizer (LG901) separately.
For work surface on top of 1 or more lateral files, order file top (TPL or
TPV) separately.
No lock option (NL) can only be specified on files with no top (NT),
dome tops (D1, H1, or H2), planter top (T7), laminate tops (TL), or
veneer top (TV1).
For cushion tops TC1 and TC2, a 1" metal top is included.
Grain direction is vertical for veneer-front lateral files.
Cushion top accepts Customer’s Own Material (COM). Yardage is
estimated for nondirectional, 54"-wide fabrics. When ordering more
than 1 cushion, round up total yardage requirement to next whole
yard of fabric.
Width—Yardage
30"—1.05
36"—1.22
42"—1.40
For information on multiple quantities or directional fabrics, contact
COM Department. See Order Information in Appendices.
For keyed-alike locks, order lock plugs separately. See Keyed-Alike
Information in Appendices.
Dimensions
29P-3!
29P-4!
===
Meridian
®
Freestanding Stackable
™
Lateral Files
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 51
Meridian
®
Sloped-Pull
Freestanding Lateral File continued
Specification Information
Step 1.
29
Step 2. Front Material
P- painted metal front
Step 3. Width
30 30" wide
36 36" wide
42 42" wide
Step 4. Depth
18- 18" deep
20- 20" deep
Step 5. Configuration
2N 2 drawers
3N 3 drawers
4N 4 drawers
5N 5 drawers
Prices for Steps 1-5.
2N 3N 4N 5N
29P-30 18- $1250 1734 2222 2710
20- $1250 1734 2222 2710
29P-36 18- $1384 1915 2447 2982
20- $1384 1915 2447 2982
29P-42 18- $1568 2166 2765 3365
20- $1568 2166 2765 3365
Step 6. Paint/Steel Type
SS smooth paint on smooth steel +$0
XS textured paint on smooth steel +$0
Step 7. Surface Finish
Nonmetallic Paint
For smooth paint on smooth steel (SS)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) A +$0
G2 graphite satin +$0
HF inner tone light +$0
LT light tone +$0
LU soft white +$0
MT medium tone +$0
SG slate grey +$0
WL warm stone (CP) +$0
Metallic Paint
For smooth paint on smooth steel (SS)
EH metallic bronze +$0
SNA satin aluminum +$88
SNB satin bronze +$88
SNC satin carbon +$88
Sand Texture Paint
For textured paint on smooth steel (XS)
91 white (CP) +$0
98 studio white (CP) A +$0
BK black +$0
CL cool grey neutral +$0
G1 graphite (CP) +$0
WN warm grey neutral +$0
Step 8. Top
M thermally-fused laminate top/thermoplastic edge +$71
NT no top +$0
T1 1"-high painted metal top with squared edge +$0
T2 1
1
/
4
"-high painted metal top with squared edge +$0
T3 1
1
/
4
"-high painted metal top with radius edge +$74
TL +$831
1
/
4
"-high high-pressure laminate top with
thermoplastic edge
T7 6
1
/
2
"-high planter top +$222
TC1 1" cushion top +$434
TC2 2" cushion top +$434
Meridian
®
Freestanding Stackable
™
Lateral Files
===
52 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Meridian
®
Sloped-Pull
Freestanding Lateral File continued
Step 9. Veneer Top Finish
Wood Veneer
2U light brown walnut A +$31
40 dark brown walnut A +$31
EW medium matte walnut A +$31
ET clear on ash A +$31
EU oak on ash A +$31
EV walnut on ash A +$31
UL natural maple A +$31
Wood Veneer
40 dark brown walnut A +$31
EW medium matte walnut A +$31
ET clear on ash A +$31
EU oak on ash A +$31
EV walnut on ash A +$31
UL natural maple A +$31
Step 10. Top Finish
Solid-Color Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) +$0
CL cool grey neutral +$0
HF inner tone light +$0
LT light tone +$0
LU soft white +$0
WL warm stone (CP) +$0
WN warm grey neutral +$0
Twill Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
LBF neutral twill +$0
LBJ graphite twill +$0
LBQ white twill +$0
Wood-Grain Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
HP light anigre +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBR phantom ecru +$0
LBS phantom cocoa +$0
LBU medium matte walnut (CP) +$0
LBV warm grey teak +$0
76 light brown walnut +$0
For thermally‑fused laminate top/thermoplastic edge (M)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBF neutral twill +$0
LBQ white twill +$0
LBU medium matte walnut (CP) +$0
===
Meridian
®
Freestanding Stackable
™
Lateral Files
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 53
Meridian
®
Sloped-Pull
Freestanding Lateral File continued
Step 11. Edge Finish
For thermally‑fused laminate top/thermoplastic edge (M) or 1
1
/
4
"‑high
high‑pressure laminate top with thermoplastic edge (TL)
76 light brown walnut +$0
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) +$0
CL cool grey neutral +$0
G2 graphite satin +$0
HF inner tone light +$0
HP light anigre +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBR phantom ecru +$0
LBS phantom cocoa +$0
LBU medium matte walnut (CP) +$0
LBV warm grey teak +$0
LBF neutral twill +$0
LBJ graphite twill +$0
LBQ white twill +$0
LU soft white +$0
SG slate grey +$0
WL warm stone (CP) +$0
WN warm grey neutral +$0
Step 12. Cushion Top Fabric
For 1" cushion top (TC1)
Price Category 1 +$0
Price Category 2 +$90
Price Category 3 +$109
Price Category 4 +$134
Price Category 5 +$158
Price Category (Geiger) 5 +$158
Price Category 7 +$181
Price Category (Geiger) 7 +$181
Price Category 8 +$958
Price Category 9 +$1254
Price Category 10 +$877
Price Category (Geiger) 10 +$1386
Price Category B +$62
Price Category C +$86
Price Category D +$109
Price Category E +$131
Price Category F +$187
Price Category G +$220
Price Category H +$270
Price Category I +$349
Price Category J +$365
Price Category L +$466
Price Category M +$512
Price Category X +$1022
Price Category Y +$1075
Meridian
®
Freestanding Stackable
™
Lateral Files
===
54 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Meridian
®
Sloped-Pull
Freestanding Lateral File continued
For 2" cushion top (TC2)
Price Category 1 +$0
Price Category 2 +$90
Price Category 3 +$109
Price Category 4 +$134
Price Category 5 +$158
Price Category (Geiger) 5 +$158
Price Category 7 +$181
Price Category (Geiger) 7 +$181
Price Category 8 +$958
Price Category 9 +$1254
Price Category 10 +$877
Price Category (Geiger) 10 +$1386
Price Category B +$62
Price Category C +$86
Price Category D +$109
Price Category E +$131
Price Category F +$187
Price Category G +$220
Price Category H +$270
Price Category I +$349
Price Category J +$365
Price Category L +$466
Price Category X +$1022
Price Category Y +$1075
Step 13. Lock
For thermally‑fused laminate top/thermoplastic edge (M), no top (NT),
1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL), or
6
1
/
2
"‑high planter top (T7)
NL no lock -$27
For 1"‑high painted metal top with squared edge (T1), 1
1
/
4
"‑high
painted metal top with squared edge (T2), 1
1
/
4
"‑high painted metal top
with radius edge (T3), 1" cushion top (TC1), or 2" cushion top (TC2)
KA keyed alike +$0
KC keyed differently, chrome +$0
KD keyed differently, black +$0
Step 14. Pull Finish
G2 graphite satin +$0
U1 brushed aluminum +$0
Step 15. Base Height
B1 1"-high base +$0
B2 1
1
/
2
"-high base +$0
B3 2
1
/
4
"-high base +$0
B4 3
1
/
4
"-high base +$0
BA 1"-high recessed base +$40
BB 1
1
/
2
"-high recessed base +$40
BC 2
1
/
4
"-high recessed base +$40
BD 3
1
/
4
"-high recessed base +$40
B5 4
1
/
4
"-high base +$40
Step 16. Counterweight
NO no counterweight (must gang or anchor) +$0
CB counterweight (recommended) +$131
Step 17. Drawer Interior
9P front-to-back filing rail +$0
9R side-to-side filing rail +$0
9M 3 dividers +$0
===
Meridian
®
Freestanding Stackable
™
Lateral Files
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 55
Retrofit Cushion Top
Product Information
Description
This cushion top is retrofit to a lateral file or storage case with a flat
metal top. It is available in 2 heights, 3 widths, and 2 depths. Hook-
and-loop fastener strips are included to attach cushion to flat metal
top.
Notes
Cushion top accepts Customer’s Own Material (COM). Yardage is
estimated for nondirectional, 54"-wide fabrics. When ordering more
than 1 cushion, round up total yardage requirement to next whole
yard of fabric.
Width—Yardage
30"—1.05
36"—1.22
42"—1.40
For information on multiple quantities or directional fabrics, contact
COM Department. See Order Information in Appendices.
Dimensions
Specification Information
Step 1.
TC
Step 2. Height
1- 1" high
2- 2" high
Step 3. Width
30 30" wide
36 36" wide
42 42" wide
Step 4. Depth
18 18" deep
20 20" deep
Prices for Steps 1-4.
TC1-30 18 $524
20 $524
TC1-36 18 $524
20 $524
TC1-42 18 $524
20 $524
TC2-30 18 $534
20 $534
TC2-36 18 $534
20 $534
TC2-42 18 $524
20 $524
TC1-3!
TC1-4!
TC2-3!
TC2-4!
Meridian
®
Freestanding Stackable
™
Lateral Files
===
56 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Retrofit Cushion Top continued
Step 5. Cushion Top Fabric
For 1" high (1‑)
Price Category 1 +$0
Price Category 2 +$90
Price Category 3 +$109
Price Category 4 +$134
Price Category 5 +$158
Price Category (Geiger) 5 +$158
Price Category 7 +$181
Price Category (Geiger) 7 +$181
Price Category 8 +$958
Price Category 9 +$1254
Price Category 10 +$877
Price Category (Geiger) 10 +$1386
Price Category B +$62
Price Category C +$58
Price Category D +$109
Price Category E +$131
Price Category F +$72
Price Category G +$220
Price Category H +$270
Price Category I +$132
Price Category J +$365
Price Category L +$466
Price Category M +$512
Price Category X +$1022
Price Category Y +$1075
For 2" high (2‑)
Price Category 1 +$0
Price Category 2 +$90
Price Category 3 +$109
Price Category 4 +$134
Price Category 5 +$158
Price Category (Geiger) 5 +$158
Price Category 7 +$181
Price Category (Geiger) 7 +$181
Price Category 8 +$958
Price Category 9 +$1254
Price Category 10 +$877
Price Category (Geiger) 10 +$1386
Price Category B +$62
Price Category C +$58
Price Category D +$109
Price Category E +$131
Price Category F +$72
Price Category G +$220
Price Category H +$270
Price Category I +$132
Price Category J +$365
Price Category L +$466
Price Category X +$1022
Price Category Y +$1075
======
Meridian
®
Mobile Stackable
™
Lateral Files
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 57
Standard-Pull Mobile Lateral File
Product Information
Description
This lateral file holds letter-, legal-, and A4-size hanging files. It
has standard pulls and smooth steel. The file has a metal, cushion,
laminate, planter, or veneer top. A positive interlock system permits
only 1 drawer to open at a time. 1 lock controls all drawers. The
drawers can be specified with 3 dividers or with front-to-back or side-
to-side filing rails for hanging files. The 4
3
/
4
"-high mobile base has a
1
1
/
2
"-high base frame with 3
1
/
4
"-high outset casters. The 2 swivel and 2
fixed casters must be field installed.
Actual lateral file widths are 29
7
/
8
", 35
7
/
8
", or 41
7
/
8
"; actual depths are
17
7
/
8
" or 19
7
/
8
".
Notes
Dimensional illustrations do not include all possible configurations.
To convert filing direction, order 1 of the following products
separately:
• Front-to-back rail (9Pxxxx)
• Side-to-side rail (9Rxxxxx)
See Stackable Lateral File Accessories for specific product number.
Order optional file drawer organizer (LG901) separately.
For cushion tops TC1 and TC2, a 1" metal top is included.
Cushion top accepts Customer’s Own Material (COM). Yardage is
estimated for nondirectional, 54"-wide fabrics. When ordering more
than 1 cushion, round up total yardage requirement to next whole
yard of fabric.
Width—Yardage
30"—1.05
36"—1.22
42"—1.40
For information on multiple quantities or directional fabrics, contact
COM Department. See Order Information in Appendices.
For keyed-alike locks, order lock plugs separately. See Keyed-Alike
Information in Appendices.
Dimensions
M26-3!
M26-4!
Meridian
®
Mobile Stackable
™
Lateral Files
======
58 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Standard-Pull Mobile Lateral File
continued
Specification Information
Step 1.
M26-
Step 2. Width
30 30" wide
36 36" wide
42 42" wide
Step 3. Depth
18- 18" deep
20- 20" deep
Step 4. Configuration
2N 2 11
3
/
4
"-high drawers
2E 2 13
1
/
8
"-high drawers
KNN pass-through unit, 2 11
3
/
4
"-high drawers
KEE pass-through unit, 2 13
1
/
8
"-high drawers
Prices for Steps 1-4.
2N 2E KNN KEE
M26-30 18- $1625 1625 2089 2089
20- $1625 1625 2089 2089
M26-36 18- $1769 1769 2264 2264
20- $1769 1769 2264 2264
M26-42 18- $1943 1943 2504 2504
20- $1943 1943 2504 2504
Step 5. Paint/Steel Type
SS smooth paint on smooth steel +$0
XS textured paint on smooth steel +$0
Step 6. Surface Finish
Nonmetallic Paint
For smooth paint on smooth steel (SS)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) A +$0
G2 graphite satin +$0
HF inner tone light +$0
LT light tone +$0
LU soft white +$0
MT medium tone +$0
SG slate grey +$0
WL warm stone (CP) +$0
Metallic Paint
For smooth paint on smooth steel (SS)
EH metallic bronze +$0
SNA satin aluminum +$88
SNB satin bronze +$88
SNC satin carbon +$88
Sand Texture Paint
For textured paint on smooth steel (XS)
91 white (CP) +$0
98 studio white (CP) A +$0
BK black +$0
CL cool grey neutral +$0
G1 graphite (CP) +$0
WN warm grey neutral +$0
Step 7. Top
M thermally-fused laminate top/thermoplastic edge +$71
T1 1"-high painted metal top with squared edge +$0
T2 1
1
/
4
"-high painted metal top with squared edge +$0
T3 1
1
/
4
"-high painted metal top with radius edge +$74
TL +$831
1
/
4
"-high high-pressure laminate top with
thermoplastic edge
T7 6
1
/
2
"-high planter top +$222
TC1 1" cushion top +$434
TC2 2" cushion top +$434
======
Meridian
®
Mobile Stackable
™
Lateral Files
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 59
Standard-Pull Mobile Lateral File
continued
Step 8.
Veneer Top Finish
2U light brown walnut A +$31
40 dark brown walnut A +$31
EW medium matte walnut A +$31
ET clear on ash A +$31
EU oak on ash A +$31
EV walnut on ash A +$31
UL natural maple A +$31
Top Finish: Solid-Color Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) +$0
CL cool grey neutral +$0
HF inner tone light +$0
LT light tone +$0
LU soft white +$0
WL warm stone (CP) +$0
WN warm grey neutral +$0
Top Finish: Twill Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
LBF neutral twill +$0
LBJ graphite twill +$0
LBQ white twill +$0
Top Finish: Wood-Grain Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
HP light anigre +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBR phantom ecru +$0
LBS phantom cocoa +$0
LBU medium matte walnut (CP) +$0
LBV warm grey teak +$0
76 light brown walnut +$0
Top Finish
For thermally‑fused laminate top/thermoplastic edge (M)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBF neutral twill +$0
LBQ white twill +$0
LBU medium matte walnut (CP) +$0
Veneer Top Finish
40 dark brown walnut A +$31
EW medium matte walnut A +$31
ET clear on ash A +$31
EU oak on ash A +$31
EV walnut on ash A +$31
UL natural maple A +$31
Step 9. Edge Finish
For thermally‑fused laminate top/thermoplastic edge (M) or 1
1
/
4
"‑high
high‑pressure laminate top with thermoplastic edge (TL)
76 light brown walnut +$0
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) +$0
CL cool grey neutral +$0
G2 graphite satin +$0
HF inner tone light +$0
HP light anigre +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBR phantom ecru +$0
LBS phantom cocoa +$0
LBU medium matte walnut (CP) +$0
LBV warm grey teak +$0
LBF neutral twill +$0
LBJ graphite twill +$0
LBQ white twill +$0
LU soft white +$0
SG slate grey +$0
WL warm stone (CP) +$0
WN warm grey neutral +$0
Meridian
®
Mobile Stackable
™
Lateral Files
======
60 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Standard-Pull Mobile Lateral File
continued
Step 10. Cushion Top Fabric
For 1" cushion top (TC1)
Price Category 1 +$0
Price Category 2 +$90
Price Category 3 +$109
Price Category 4 +$134
Price Category 5 +$158
Price Category (Geiger) 5 +$158
Price Category 7 +$181
Price Category (Geiger) 7 +$181
Price Category 8 +$958
Price Category 9 +$1254
Price Category 10 +$877
Price Category (Geiger) 10 +$1386
Price Category B +$62
Price Category C +$86
Price Category D +$109
Price Category E +$131
Price Category F +$187
Price Category G +$220
Price Category H +$270
Price Category I +$349
Price Category J +$365
Price Category L +$466
Price Category M +$512
Price Category X +$1022
Price Category Y +$1075
For 2" cushion top (TC2)
Price Category 1 +$0
Price Category 2 +$90
Price Category 3 +$109
Price Category 4 +$134
Price Category 5 +$158
Price Category (Geiger) 5 +$158
Price Category 7 +$181
Price Category (Geiger) 7 +$181
Price Category 8 +$958
Price Category 9 +$1254
Price Category 10 +$877
Price Category (Geiger) 10 +$1386
Price Category B +$62
Price Category C +$86
Price Category D +$109
Price Category E +$131
Price Category F +$187
Price Category G +$220
Price Category H +$270
Price Category I +$349
Price Category J +$365
Price Category L +$466
Price Category X +$1022
Price Category Y +$1075
Step 11. Lock
KA keyed alike +$0
KC keyed differently, chrome +$0
KD keyed differently, black +$0
Step 12. Drawer Interior
9M 3 dividers +$0
9P front-to-back filing rail +$0
9R side-to-side filing rail +$0
======
Meridian
®
Mobile Stackable
™
Lateral Files
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 61
Bevel-Pull Mobile Lateral File
Product Information
Description
This lateral file holds letter-, legal-, and A4-size hanging files. It has
bevel pulls and smooth steel. The file has a metal, cushion, laminate,
planter, or veneer top. A positive interlock system permits only 1
drawer to open at a time. 1 lock controls all drawers. The drawers can
be specified with 3 dividers or with front-to-back or side-to-side filing
rails for hanging files. The 4
3
/
4
"-high mobile base has a 1
1
/
2
"-high base
frame with 3
1
/
4
"-high outset casters. The 2 swivel and 2 fixed casters
must be field installed.
Actual lateral file widths are 29
7
/
8
", 35
7
/
8
", or 41
7
/
8
"; actual depths are
17
7
/
8
" or 19
7
/
8
".
Notes
Dimensional illustrations do not include all possible configurations.
To convert filing direction, order 1 of the following products
separately:
• Front-to-back rail (9Pxxxx)
• Side-to-side rail (9Rxxxxx)
See Stackable Lateral File Accessories for specific product number.
Order optional file drawer organizer (LG901) separately.
For cushion tops TC1 and TC2, a 1" metal top is included.
Cushion top accepts Customer’s Own Material (COM). Yardage is
estimated for nondirectional, 54"-wide fabrics. When ordering more
than 1 cushion, round up total yardage requirement to next whole
yard of fabric.
Width—Yardage
30"—1.05
36"—1.22
42"—1.40
For information on multiple quantities or directional fabrics, contact
COM Department. See Order Information in Appendices.
For keyed-alike locks, order lock plugs separately. See Keyed-Alike
Information in Appendices.
Dimensions
M24-3!
M24-4!
Meridian
®
Mobile Stackable
™
Lateral Files
======
62 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Bevel-Pull Mobile Lateral File
continued
Specification Information
Step 1.
M24-
Step 2. Width
30 30" wide
36 36" wide
42 42" wide
Step 3. Depth
18- 18" deep
20- 20" deep
Step 4. Configuration
2N 2 11
3
/
4
"-high drawers
2E 2 13
1
/
8
"-high drawers
Prices for Steps 1-4.
2N 2E
M24-30 18- $1625 1625
20- $1625 1625
M24-36 18- $1769 1769
20- $1769 1769
M24-42 18- $1943 1943
20- $1943 1943
Step 5. Paint/Steel Type
SS smooth paint on smooth steel +$0
XS textured paint on smooth steel +$0
Step 6. Surface Finish
Nonmetallic Paint
For smooth paint on smooth steel (SS)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) A +$0
G2 graphite satin +$0
HF inner tone light +$0
LT light tone +$0
LU soft white +$0
MT medium tone +$0
SG slate grey +$0
WL warm stone (CP) +$0
Metallic Paint
For smooth paint on smooth steel (SS)
EH metallic bronze +$0
SNA satin aluminum +$88
SNB satin bronze +$88
SNC satin carbon +$88
Sand Texture Paint
For textured paint on smooth steel (XS)
91 white (CP) +$0
98 studio white (CP) A +$0
BK black +$0
CL cool grey neutral +$0
G1 graphite (CP) +$0
WN warm grey neutral +$0
Step 7. Top
M thermally-fused laminate top/thermoplastic edge +$71
T1 1"-high painted metal top with squared edge +$0
T2 1
1
/
4
"-high painted metal top with squared edge +$0
T3 1
1
/
4
"-high painted metal top with radius edge +$74
TL +$831
1
/
4
"-high high-pressure laminate top with
thermoplastic edge
T7 6
1
/
2
"-high planter top +$222
TC1 1" cushion top +$434
TC2 2" cushion top +$434
Step 8. Lock
For 1"‑high painted metal top with squared edge (T1), 1
1
/
4
"‑high
painted metal top with squared edge (T2), 1
1
/
4
"‑high painted metal top
with radius edge (T3), 1" cushion top (TC1), or 2" cushion top (TC2)
KA keyed alike +$0
KC keyed differently, chrome +$0
KD keyed differently, black +$0
For thermally‑fused laminate top/thermoplastic edge (M), 1
1
/
4
"‑high
high‑pressure laminate top with thermoplastic edge (TL), or 6
1
/
2
"‑high
planter top (T7)
NL no lock -$27
======
Meridian
®
Mobile Stackable
™
Lateral Files
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 63
Bevel-Pull Mobile Lateral File
continued
Step 9.
Veneer Top Finish: Wood Veneer
2U light brown walnut A +$31
40 dark brown walnut A +$31
EW medium matte walnut A +$31
ET clear on ash A +$31
EU oak on ash A +$31
EV walnut on ash A +$31
UL natural maple A +$31
Top Finish: Solid-Color Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) +$0
CL cool grey neutral +$0
HF inner tone light +$0
LT light tone +$0
LU soft white +$0
WL warm stone (CP) +$0
WN warm grey neutral +$0
Top Finish: Twill Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
LBF neutral twill +$0
LBJ graphite twill +$0
LBQ white twill +$0
Top Finish: Wood-Grain Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
HP light anigre +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBR phantom ecru +$0
LBS phantom cocoa +$0
LBU medium matte walnut (CP) +$0
LBV warm grey teak +$0
76 light brown walnut +$0
Top Finish
For thermally‑fused laminate top/thermoplastic edge (M)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBF neutral twill +$0
LBQ white twill +$0
LBU medium matte walnut (CP) +$0
Veneer Top Finish: Wood Veneer
40 dark brown walnut A +$31
EW medium matte walnut A +$31
ET clear on ash A +$31
EU oak on ash A +$31
EV walnut on ash A +$31
UL natural maple A +$31
Step 10. Edge Finish
For thermally‑fused laminate top/thermoplastic edge (M) or 1
1
/
4
"‑high
high‑pressure laminate top with thermoplastic edge (TL)
76 light brown walnut +$0
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) +$0
CL cool grey neutral +$0
G2 graphite satin +$0
HF inner tone light +$0
HP light anigre +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBR phantom ecru +$0
LBS phantom cocoa +$0
LBU medium matte walnut (CP) +$0
LBV warm grey teak +$0
LBF neutral twill +$0
LBJ graphite twill +$0
LBQ white twill +$0
LU soft white +$0
SG slate grey +$0
WL warm stone (CP) +$0
WN warm grey neutral +$0
Meridian
®
Mobile Stackable
™
Lateral Files
======
64 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Bevel-Pull Mobile Lateral File
continued
Step 11. Cushion Top Fabric
For 1" cushion top (TC1)
Price Category 1 +$0
Price Category 2 +$90
Price Category 3 +$109
Price Category 4 +$134
Price Category 5 +$158
Price Category (Geiger) 5 +$158
Price Category 7 +$181
Price Category (Geiger) 7 +$181
Price Category 8 +$958
Price Category 9 +$1254
Price Category 10 +$877
Price Category (Geiger) 10 +$1386
Price Category B +$62
Price Category C +$86
Price Category D +$109
Price Category E +$131
Price Category F +$187
Price Category G +$220
Price Category H +$270
Price Category I +$349
Price Category J +$365
Price Category L +$466
Price Category M +$512
Price Category X +$560
Price Category Y +$607
For 2" cushion top (TC2)
Price Category 1 +$0
Price Category 2 +$90
Price Category 3 +$109
Price Category 4 +$134
Price Category 5 +$158
Price Category (Geiger) 5 +$158
Price Category 7 +$181
Price Category (Geiger) 7 +$181
Price Category 8 +$958
Price Category 9 +$1254
Price Category 10 +$877
Price Category (Geiger) 10 +$1386
Price Category B +$62
Price Category C +$86
Price Category D +$109
Price Category E +$131
Price Category F +$187
Price Category G +$220
Price Category H +$270
Price Category I +$349
Price Category J +$365
Price Category L +$466
Price Category X +$560
Price Category Y +$607
Step 12. Drawer Interior
9M 3 dividers +$0
9P front-to-back filing rail +$0
9R side-to-side filing rail +$0
=========
Meridian
®
Credenza Arc/Bar Pull
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 65
Meridian
®
Low Credenza
Product Information
Description
This credenza holds letter-, legal-, and A4-size hanging files in the
file drawer. The box drawer provides for storage of miscellaneous
supplies and personal items.
Actual credenza widths are 29
7
/
8
", 35
7
/
8
", or 41
7
/
8
"; actual depths are
17
7
/
8
" or 19
7
/
8
".
Notes
Credenza case height is 17
5
/
8
".
Lock is standard in drawer front.
For base height option (LB2), overall height is 3
1
/
2
" consisting of 1
1
/
2
"
tube base with 2" legs.
Dimensional illustrations do not include all possible configurations.
To convert filing direction, order 1 of the following products
separately:
• Front-to-back rail (9Pxxxx)
• Side-to-side rail (9Rxxxxx)
See Stackable Lateral File Accessories for specific product number.
Order optional file drawer organizer (LG901) separately.
For work surface on top of 1 or more credenzas, order file top (TPL or
TPV) separately.
For cushion tops (TC1) and (TC2), a 1" metal top is included.
Cushion top accepts Customer’s Own Material (COM). Yardage is
estimated for nondirectional, 54"-wide fabrics. When ordering more
than 1 cushion, round up total yardage requirement to next whole
yard of fabric.
Width—Yardage
30"—1.05
36"—1.22
42"—1.40
For information on multiple quantities or directional fabrics, contact
COM Department. See Order Information in Appendices.
For keyed-alike locks, order lock plugs separately. See Keyed-Alike
Information in Appendices.
Dimensions
C2K-3!
C2K-4!
Meridian
®
Credenza Arc/Bar Pull
=========
66 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Meridian
®
Low Credenza continued
Specification Information
Step 1.
C2 A
Step 2. Pull
K- bar pull A
Step 3. Width
30 30" wide A
36 36" wide A
42 42" wide A
Step 4. Depth
18- 18" deep A
20- 20" deep A
Step 5. Configuration
BF box/file A
Step 6. Front Material
M painted metal A
Prices for Steps 1-6.
M
C2K-30 18- BF $1137
20- BF $1137
M
C2K-36 18- BF $1240
20- BF $1240
M
C2K-42 18- BF $1375
20- BF $1375
Step 7. Paint/Steel Type
SS smooth paint on smooth steel +$0
XS textured paint on smooth steel +$0
Step 8. Surface Finish
Nonmetallic Paint
For smooth paint on smooth steel (SS)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) A +$0
G2 graphite satin +$0
HF inner tone light +$0
LT light tone +$0
LU soft white +$0
MT medium tone +$0
SG slate grey +$0
WL warm stone (CP) +$0
Metallic Paint
For smooth paint on smooth steel (SS)
EH metallic bronze +$0
SNA satin aluminum +$88
SNB satin bronze +$88
SNC satin carbon +$88
Sand Texture Paint
For textured paint on smooth steel (XS)
91 white (CP) +$0
98 studio white (CP) A +$0
BK black +$0
CL cool grey neutral +$0
G1 graphite (CP) +$0
WN warm grey neutral +$0
Step 9. Top
For painted metal (M)
NT no top +$0
T2 1
1
/
4
"-high painted metal top with squared edge +$0
TL +$831
1
/
4
"-high high-pressure laminate top with
thermoplastic edge
TC1 1" cushion top +$434
TC2 2" cushion top +$434
=========
Meridian
®
Credenza Arc/Bar Pull
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 67
Meridian
®
Low Credenza continued
Step 10.
Top Finish: Solid-Color Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
CL cool grey neutral +$0
HF inner tone light +$0
LT light tone +$0
LU soft white +$0
WL warm stone (CP) +$0
WN warm grey neutral +$0
Top Finish: Twill Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
LBF neutral twill +$0
LBJ graphite twill +$0
LBQ white twill +$0
Top Finish: Wood-Grain Laminate
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
76 light brown walnut +$0
HP light anigre +$0
LBA clear on ash (CP) +$0
LBR phantom ecru +$0
LBS phantom cocoa +$0
LBU medium matte walnut (CP) +$0
LBV warm grey teak +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
Veneer Top Finish: Wood Veneer
2U light brown walnut A +$31
40 dark brown walnut A +$31
EW medium matte walnut A +$31
ET clear on ash A +$31
EV walnut on ash A +$31
UL natural maple A +$31
Step 11. Edge Finish
For 1
1
/
4
"‑high high‑pressure laminate top with thermoplastic edge (TL)
76 light brown walnut +$0
8Q folkstone grey (CP) +$0
91 white (CP) +$0
CL cool grey neutral +$0
G2 graphite satin +$0
HF inner tone light +$0
HP light anigre +$0
LBA clear on ash (CP) +$0
LBR phantom ecru +$0
LBS phantom cocoa +$0
LBU medium matte walnut (CP) +$0
LBV warm grey teak +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBF neutral twill +$0
LBJ graphite twill +$0
LBQ white twill +$0
LU soft white +$0
SG slate grey +$0
WL warm stone (CP) +$0
WN warm grey neutral +$0
Meridian
®
Credenza Arc/Bar Pull
=========
68 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Meridian
®
Low Credenza continued
Step 12. Cushion Top Fabric
For 1" cushion top (TC1)
Price Category 1 +$0
Price Category 2 +$90
Price Category 3 +$109
Price Category 4 +$134
Price Category 5 +$158
Price Category (Geiger) 5 +$158
Price Category 7 +$181
Price Category (Geiger) 7 +$181
Price Category 8 +$521
Price Category 9 +$1254
Price Category 10 +$877
Price Category (Geiger) 10 +$1386
Price Category B +$62
Price Category C +$58
Price Category D +$109
Price Category E +$131
Price Category F +$131
Price Category G +$220
Price Category H +$270
Price Category I +$280
Price Category J +$365
Price Category L +$466
Price Category M +$512
Price Category X +$1022
Price Category Y +$1075
For 2" cushion top (TC2)
Price Category 1 +$0
Price Category 2 +$90
Price Category 3 +$109
Price Category 4 +$134
Price Category 5 +$158
Price Category (Geiger) 5 +$158
Price Category 7 +$181
Price Category (Geiger) 7 +$181
Price Category 8 +$521
Price Category 9 +$1254
Price Category 10 +$877
Price Category (Geiger) 10 +$1386
Price Category B +$62
Price Category C +$58
Price Category D +$109
Price Category E +$131
Price Category F +$131
Price Category G +$220
Price Category H +$270
Price Category I +$280
Price Category J +$365
Price Category L +$466
Price Category X +$1022
Price Category Y +$1075
Step 13. Lock
KA keyed alike +$0
KC keyed differently, chrome +$0
KD keyed differently, black +$0
Step 14. Pull Finish
Metallic Paint
SNA satin aluminum +$11
SNB satin bronze +$11
SNC satin carbon +$11
Sand Texture Paint
DB3 glacier A +$10
DN2 nightfall A +$10
DR1 canyon A +$10
OLF olive A +$10
BK black A +$0
=========
Meridian
®
Credenza Arc/Bar Pull
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 69
Meridian
®
Low Credenza continued
Smooth Paint
8Q folkstone grey (CP) A +$0
91 white (CP) A +$0
98 studio white (CP) A +$0
G1 graphite (CP) A +$0
WL warm stone (CP) A +$0
Step 15. Base Height
B3 2
1
/
4
"-high base +$0
LB2 1
1
/
2
" leg base +$40
Step 16. Leg
For 1
1
/
2
" leg base (LB2)
DD 2"-high canvas leg A +$129
Step 17. Leg Finish
Sand Texture Paint
91 white (CP) A +$0
BK black A +$0
CL cool grey neutral A +$0
G1 graphite (CP) A +$0
WN warm grey neutral A +$0
Metallic Paint
EH metallic bronze A +$0
SNA satin aluminum +$11
SNB satin bronze +$11
SNC satin carbon +$11
Step 18. Counterweight
NO no counterweight (must gang or anchor) +$0
CB counterweight (recommended) +$131
Step 19. Drawer Interior
9M 3 dividers +$0
9P front-to-back filing rail +$0
9R side-to-side filing rail +$0
Meridian
®
File Tops
============
70 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Meridian
®
File Top
Product Information
Description
This file top attaches to a combination of freestanding Meridian
®
lateral files or storage cases with 18" or 20" depths. It has a laminate
top with thermoplastic edge or a veneer top and edge.
Notes
Standard-pull files have lock located in side stile and do not require
metal top under common top. Files with all other pull types will
require metal top under common top to accommodate locks.
Suggested attachment methods:
• Double-face tape
• #10 wood screws with 1" maximum length
Additional sizes and open-line laminates available through Vary Easy
Exact Size Top Price Book (specIT edition only).
Dimensions
Specification Information
Step 1.
TP
Step 2. Top/Edge Material
M- thermally fused laminate top/thermoplastic edge
L- high-pressure laminate top with thermoplastic edge
V- veneer top with veneer edge A
Step 3. Width
For thermally fused laminate top/thermoplastic edge (M‑) or high‑
pressure laminate top with thermoplastic edge (L‑)
030 30" wide A
036 36" wide
042 42" wide A
060 60" wide A
072 72" wide
084 84" wide A
090 90" wide A
108 108" wide
For veneer top with veneer edge (V‑)
030 30" wide A
036 36" wide A
042 42" wide A
060 60" wide A
072 72" wide A
084 84" wide A
090 90" wide A
Step 4. Depth
18 18" deep A
20 20" deep
36 36" deep A
40 40" deep
Prices for Steps 1-4.
TPM-030 18 $182
20 $182
36 $400
40 $400
TPM-036 18 $217
20 $217
36 $478
40 $478
TPL-0!
TPL-1!
TPM-0!
TPM-1!
TPV-0!
============
Meridian
®
File Tops
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 71
Meridian
®
File Top continued
TPM-042 18 $252
20 $252
36 $555
40 $555
TPM-060 18 $357
20 $357
36 $794
40 $794
TPM-072 18 $427
20 $427
36 $949
40 $949
TPM-084 18 $496
20 $496
36 $1105
40 $1105
TPM-090 18 $532
20 $532
36 $1187
40 $1187
TPM-108 18 $638
20 $638
36 $1425
40 $1425
TPL-030 18 $209
20 $209
36 $460
40 $460
TPL-036 18 $249
20 $249
36 $550
40 $550
TPL-042 18 $290
20 $290
36 $639
40 $639
TPL-060 18 $410
20 $410
36 $914
40 $914
TPL-072 18 $492
20 $492
36 $1092
40 $1092
TPL-084 18 $571
20 $571
36 $1272
40 $1272
TPL-090 18 $613
20 $613
36 $1367
40 $1367
TPL-108 18 $734
20 $734
36 $1640
40 $1640
TPV-030 18 $495
20 $495
36 $786
40 $786
TPV-036 18 $555
20 $555
36 $906
40 $906
TPV-042 18 $611
20 $611
36 $1022
40 $1022
TPV-060 18 $786
20 $786
36 $1371
40 $1371
Meridian
®
File Tops
============
72 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Meridian
®
File Top continued
TPV-072 18 $909
20 $909
36 $1607
40 $1607
TPV-084 18 $1026
20 $1026
36 $1843
40 $1843
TPV-090 18 $1081
20 $1081
36 $1956
40 $1956
Step 5.
Top Finish: Solid-Color Laminate
For high‑pressure laminate top with thermoplastic edge (L‑)
8Q folkstone grey (CP) A +$0
91 white (CP) A +$0
98 studio white (CP) +$0
CL cool grey neutral A +$0
HF inner tone light A +$0
LT light tone A +$0
LU soft white A +$0
WL warm stone (CP) A +$0
WN warm grey neutral A +$0
Top Finish: Twill Laminate
For high‑pressure laminate top with thermoplastic edge (L‑)
LBF neutral twill +$0
LBJ graphite twill +$0
LBQ white twill +$0
Top Finish: Wood-Grain Laminate
For high‑pressure laminate top with thermoplastic edge (L‑)
HP light anigre A +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBR phantom ecru +$0
LBS phantom cocoa +$0
LBU medium matte walnut (CP) +$0
LBV warm grey teak +$0
76 light brown walnut A +$0
Top Finish
For thermally fused laminate top/thermoplastic edge (M‑)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBF neutral twill +$0
LBQ white twill +$0
LBU medium matte walnut (CP) +$0
Top/Edge Finish: Wood Veneer
For veneer top with veneer edge (V‑)
2U light brown walnut A +$116
40 dark brown walnut A +$116
EW medium matte walnut A +$116
ET clear on ash A +$116
EU oak on ash A +$116
EV walnut on ash A +$116
UL natural maple A +$116
============
Meridian
®
File Tops
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 73
Meridian
®
File Top continued
Step 6. Edge Finish
For thermally fused laminate top/thermoplastic edge (M‑) or high‑
pressure laminate top with thermoplastic edge (L‑)
LT light tone A +$0
76 light brown walnut A +$0
8Q folkstone grey (CP) A +$0
91 white (CP) A +$0
98 studio white (CP) +$0
CL cool grey neutral A +$0
G2 graphite satin A +$0
HF inner tone light A +$0
HP light anigre A +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBR phantom ecru +$0
LBS phantom cocoa +$0
LBU medium matte walnut (CP) +$0
LBV warm grey teak +$0
LBF neutral twill A +$0
LBJ graphite twill A +$0
LBQ white twill A +$0
LU soft white A +$0
SG slate grey A +$0
WL warm stone (CP) A +$0
WN warm grey neutral A +$0
Meridian
®
File Surrounds
===============
74 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Meridian
®
Storage Surround Top
Product Information
Description
This surround top attaches to a combination of freestanding
Meridian
®
lateral files or storage cases with 18" or 20" depths. It
has a laminate top with thermoplastic edge, laminate top with
a thermoplastic backed plywood edge, or veneer top and edge.
Attachment hardware included.
Notes
Laminate tops up to and including 108" wide are 1-piece tops, and
120" wide and wider are 2-piece tops with connecting hardware.
Veneer tops up to and including 90" wide are 1-piece tops, and 108"
wide and wider are 2-piece tops with connecting hardware.
Files with standard pulls have lock located in side stile and do not
require metal top under common top. Files will all other pull types will
require metal top under common top to accommodate locks.
Tops are required to be secured to storage case with the supplied #10
wood screws with 1" maximum length.
When using storage surround top (FST) independently of storage
surround end (FSE), the top will oversail the end panel 1
1
/
4
".
Dimensions
FSTL-!
FSTM-!
FSTT-!
FSTU-!
FSTV-!
===============
Meridian
®
File Surrounds
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 75
Meridian
®
Storage Surround Top
continued
Specification Information
Step 1.
FST
Step 2. Top/Edge Material
M- thermally fused laminate top/thermoplastic edge
T- thermally fused laminate top/universal edge
L- high-pressure laminate top with thermoplastic edge
V- veneer top with veneer edge A
U- high-pressure laminate top with universal edge A
Step 3. Width
060 60" wide A
072 72" wide A
084 84" wide A
090 90" wide
108 108" wide A
120 120" wide
126 126" wide
144 144" wide
150 150" wide A
168 168" wide A
180 180" wide A
Step 4. Depth
18 18" deep A
20 20" deep
36 36" deep A
40 40" deep
Prices for Steps 1-4.
18 20 36 40
FSTM- 060 $383 383 777 777
072 $450 450 932 932
084 $518 518 1086 1086
090 $553 553 1162 1162
108 $654 654 1395 1395
120 $1447 1447 1981 1981
126 $1482 1482 2059 2059
144 $1585 1585 2291 2291
150 $1620 1620 2366 2366
168 $1721 1721 2597 2597
180 $1790 1790 2753 2753
FSTT- 060 $390 390 794 794
072 $460 460 949 949
084 $529 529 1108 1108
090 $565 565 1186 1186
108 $687 687 1424 1424
120 $1477 1477 2022 2022
126 $1513 1513 2101 2101
144 $1615 1615 2335 2335
150 $1654 1654 2415 2415
168 $1757 1757 2549 2549
180 $1829 1829 2808 2808
FSTL- 060 $441 441 894 894
072 $518 518 1072 1072
084 $597 597 1250 1250
090 $637 637 1338 1338
108 $752 752 1606 1606
120 $1665 1665 2281 2281
126 $1705 1705 2371 2371
144 $1824 1824 2637 2637
150 $1864 1864 2723 2723
168 $1981 1981 2989 2989
180 $2060 2060 3169 3169
FSTV- 060 $917 917 1518 1518
072 $1036 1036 1754 1754
084 $1155 1155 1987 1987
090 $1217 1217 2104 2104
108 $2137 2137 2614 2614
120 $2255 2255 3069 3069
126 $2315 2315 2966 2966
144 $2493 2493 3319 3319
150 $2554 2554 3436 3436
168 $2736 2736 3788 3788
180 $2858 2858 4025 4025
FSTU- 060 $448 448 914 914
072 $529 529 1092 1092
084 $609 609 1276 1276
090 $651 651 1366 1366
108 $767 767 1639 1639
120 $1700 1700 2327 2327
126 $1741 1741 2418 2418
144 $1859 1859 2688 2688
150 $1904 1904 2779 2779
168 $2022 2022 3049 3049
180 $2105 2105 3233 3233
Meridian
®
File Surrounds
===============
76 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Meridian
®
Storage Surround Top
continued
Step 5. Top Finish
Solid-Color Laminate
For high‑pressure laminate top with thermoplastic edge (L‑) or high‑
pressure laminate top with universal edge (U‑)
98 studio white (CP) +$0
8Q folkstone grey (CP) A +$0
91 white (CP) A +$0
CL cool grey neutral A +$0
HF inner tone light A +$0
LT light tone A +$0
LU soft white A +$0
WL warm stone (CP) A +$0
WN warm grey neutral A +$0
Twill Laminate
For high‑pressure laminate top with thermoplastic edge (L‑) or high‑
pressure laminate top with universal edge (U‑)
LBF neutral twill +$0
LBJ graphite twill +$0
LBQ white twill +$0
Wood-Grain Laminate
For high‑pressure laminate top with thermoplastic edge (L‑) or high‑
pressure laminate top with universal edge (U‑)
HP light anigre A +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBR phantom ecru +$0
LBS phantom cocoa +$0
LBU medium matte walnut (CP) +$0
LBV warm grey teak +$0
76 light brown walnut A +$0
Wood Veneer
For veneer top with veneer edge (V‑)
2U light brown walnut A +$116
40 dark brown walnut A +$116
CHD noble cherry +$116
ET clear on ash A +$116
EU oak on ash A +$116
EV walnut on ash A +$116
EW medium matte walnut A +$116
UL natural maple A +$116
WHN natural white oak +$116
For thermally fused laminate top/thermoplastic edge (M‑) or thermally
fused laminate top/universal edge (T‑)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBF neutral twill +$0
LBQ white twill +$0
LBU medium matte walnut (CP) +$0
Step 6. Edge Finish
For thermally fused laminate top/thermoplastic edge (M‑) or high‑
pressure laminate top with thermoplastic edge (L‑)
98 studio white (CP) +$0
76 light brown walnut A +$0
8Q folkstone grey (CP) A +$0
91 white (CP) A +$0
CL cool grey neutral A +$0
G2 graphite satin A +$0
HF inner tone light A +$0
HP light anigre A +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBR phantom ecru +$0
LBS phantom cocoa +$0
LBU medium matte walnut (CP) +$0
LBV warm grey teak +$0
LBF neutral twill A +$0
LBJ graphite twill A +$0
LBQ white twill A +$0
LU soft white A +$0
SG slate grey A +$0
WL warm stone (CP) A +$0
WN warm grey neutral A +$0
For thermally fused laminate top/universal edge (T‑) or high‑pressure
laminate top with universal edge (U‑)
98 studio white (CP) +$0
PLY plywood edge A +$55
===============
Meridian
®
File Surrounds
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 77
Meridian
®
Storage Surround End
Product Information
Description
This surround end attaches to a combination of freestanding
Meridian
®
lateral files or storage cases with 18" or 20" depths. It has
a laminate top with thermoplastic edge or a veneer top and edge.
Attachment hardware included.
Notes
Pricing is for a single file end.
Surround end is attached to storage case only. Ends are not designed
to support a surround top at the open end.
Surround end heights are designed to align with the following case,
base, and top specifications:
• 37—aligns with 35
1
/
4
" case height with 2
1
/
4
" base and no top
• 38—aligns with 35
1
/
4
" case height with 2
1
/
4
" base and 1
1
/
4
" top
• 41—aligns with 39
3
/
8
" case height with 2
1
/
4
" base and no top
• 42—aligns with 39
3
/
8
" case height with 2
1
/
4
" base and 1
1
/
4
" top
Files with standard pulls have lock located in side stile and do not
require metal top under common top. Files with all other pull types
will require metal top under common top to accommodate locks.
When ordering tops, consider the thickness of end panel (1
1
/
4
") to
allow top over design.
Ends are secured to storage case with the supplied #10 wood screws
with 1" maximum length.
Additional sizes and open-line laminates available through Vary Easy
Exact Size Top Price Book (SpecIT edition only).
Dimensions
Specification Information
Step 1.
FSE A
Step 2. End/Edge Material
M- thermally fused laminate top/thermoplastic edge
L- high-pressure laminate end with thermoplastic edge
V- veneer end with veneer edge A
Step 3. Height
37 37.5" high A
38 38.75" high A
41 41.625" high
42 42.875" high A
Step 4. Depth
18 18" deep A
20 20" deep
36 36" deep A
40 40" deep A
Prices for Steps 1-4.
18 20 36 40
FSEM- 37 $330 330 468 468
38 $334 334 473 473
41 $342 342 479 479
42 $349 349 484 484
FSEL- 37 $380 380 538 538
38 $384 384 545 545
41 $393 393 551 551
42 $402 402 558 558
FSEV- 37 $801 801 1139 1139
38 $815 815 1152 1152
41 $832 832 1164 1164
42 $843 843 1179 1179
FSEL-!
FSEM-!
FSEV-!
Meridian
®
File Surrounds
===============
78 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Meridian
®
Storage Surround End
continued
Step 5.
End Finish: Solid-Color Laminate
For high‑pressure laminate end with thermoplastic edge (L‑)
8Q folkstone grey (CP) A +$0
91 white (CP) A +$0
CL cool grey neutral A +$0
HF inner tone light A +$0
LT light tone A +$0
LU soft white A +$0
WL warm stone (CP) A +$0
WN warm grey neutral A +$0
End Finish: Twill Laminate
For high‑pressure laminate end with thermoplastic edge (L‑)
LBF neutral twill A +$0
LBJ graphite twill A +$0
LBQ white twill A +$0
End Finish: Wood-Grain Laminate
For high‑pressure laminate end with thermoplastic edge (L‑)
76 light brown walnut A +$0
HP light anigre A +$0
LBA clear on ash (CP) A +$0
LBR phantom ecru A +$0
LBS phantom cocoa A +$0
LBU medium matte walnut (CP) A +$0
LBV warm grey teak A +$0
LBB oak on ash (CP) A +$0
LBC walnut on ash (CP) A +$0
End Finish
For thermally fused laminate top/thermoplastic edge (M‑)
8Q folkstone grey (CP) +$0
91 white (CP) +$0
98 studio white (CP) +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBF neutral twill +$0
LBQ white twill +$0
LBU medium matte walnut (CP) +$0
End/Edge Finish: Wood Veneer
For veneer end with veneer edge (V‑)
2U light brown walnut A +$91
40 dark brown walnut A +$91
CHD noble cherry +$91
ET clear on ash A +$91
EU oak on ash A +$91
EV walnut on ash A +$91
EW medium matte walnut A +$91
UL natural maple A +$91
WHN natural white oak +$91
Step 6. Edge Finish
For thermally fused laminate top/thermoplastic edge (M‑) or high‑
pressure laminate end with thermoplastic edge (L‑)
76 light brown walnut A +$0
8Q folkstone grey (CP) A +$0
91 white (CP) A +$0
CL cool grey neutral A +$0
G2 graphite satin A +$0
HF inner tone light A +$0
HP light anigre A +$0
LBA clear on ash (CP) +$0
LBB oak on ash (CP) +$0
LBC walnut on ash (CP) +$0
LBR phantom ecru +$0
LBS phantom cocoa +$0
LBU medium matte walnut (CP) +$0
LBV warm grey teak +$0
LBF neutral twill A +$0
LBJ graphite twill A +$0
LBQ white twill A +$0
LU soft white A +$0
SG slate grey A +$0
WL warm stone (CP) A +$0
WN warm grey neutral A +$0
===============
Meridian
®
File Surrounds
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 79
Meridian
®
Storage Surround
Support Legs
Product Information
Description
This metal leg attaches to a surround top in lieu of a surround
end panel. Each leg has an adjustable glide with 1
1
/
2
" of height
adjustment. Specified and shipped as a pair (2).
Surround legs are designed to align with the following case, base,
and top specifications:
• 37—aligns with 35
1
/
4
" case height with 2
1
/
4
" base and no top
• 38—aligns with 35
1
/
4
" case height with 2
1
/
4
" base and 1
1
/
4
" top
• 41—aligns with 39
3
/
8
" case height with 2
1
/
4
" base and no top
• 42—aligns with 39
3
/
8
" case height with 2
1
/
4
" base and 1
1
/
4
" top
Notes
Legs are used to support 1 end of file surround top (FSTL-, FSLV-), and
leg height matches height of file surround end panel (FSEL-, FSEV-).
Dimensions
FSLR-!
FSLS-!
Meridian
®
File Surrounds
===============
80 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Meridian
®
Storage Surround
Support Legs continued
Specification Information
Step 1.
FSL A
Step 2. Leg Style
R- round A
S- square A
Step 3. Height
37 37.5" high A
38 38.75" high A
41 41.625" high A
42 42.875" high A
Prices for Steps 1-3.
FSLR- 37 $428
38 $428
41 $465
42 $465
FSLS- 37 $576
38 $576
41 $604
42 $604
Step 4. Paint/Steel Type
SS smooth paint on smooth steel A +$0
XS textured paint on smooth steel A +$0
Step 5. Surface Finish
Sand Texture Paint
For textured paint on smooth steel (XS)
91 white (CP) A +$0
BK black A +$0
G1 graphite (CP) A +$0
Metallic Paint
For smooth paint on smooth steel (SS)
SNA satin aluminum +$11
SNB satin bronze +$11
SNC satin carbon +$11
==================
Meridian
®
Stackable
™
Lateral File Accessories
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 81
Front-to-Back Filing Rail,
Meridian
®
Stackable
™
Lateral File
Product Information
Description
This filing rail holds letter-size hanging folders for front-to-back filing.
The 16" rail is used in an 18"-deep Meridian
®
lateral file drawer. The
18" rail is used in the file drawer of a Meridian Stackable Storage
™
cabinet bottom module, 20"-deep Meridian lateral file, or Meridian
lateral storage tower.
Notes
Front-to-back filing rail cannot be used in Tu
®
or Quadrant
®
lateral file
drawers.
Dimensions
Specification Information
Step 1.
9P
Step 2. Width
00 for 30"- or 42"-wide drawers
36 for 36"-wide drawers
Step 3. Depth
18 18" deep
20 20" deep
Prices for Steps 1-3.
9P0018 $45
9P0020 $45
9P3618 $45
9P3620 $45
9P001!
9P002!
9P361!
9P362!
Meridian
®
Stackable
™
Lateral File Accessories
==================
82 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Side-to-Side Filing Rail,
Meridian
®
Stackable
™
Lateral File
Product Information
Description
This filing rail holds letter- or legal-size hanging folders for side-to-
side filing. The 21"-wide rail is used in the file drawer of a 24"-wide
Meridian
®
Stackable Storage
™
cabinet bottom module. The 27"-wide
rail is used in the file drawer of a 30"-wide Meridian Stackable Storage
cabinet bottom module, Meridian lateral file, or Meridian lateral
storage tower. The 33"-wide rail is used in the file drawer of a 36"-wide
Meridian lateral file. The 39"-wide rail is used in the file drawer of a
42"-wide Meridian lateral file.
Notes
Side-to-side filing rail cannot be used in Tu
®
or Quadrant
®
lateral file
drawers.
Dimensions
Specification Information
Step 1.
9R
Step 2. Quantity
1 1 filing rail
2 2 filing rails
Step 3. Width
2400 for 24"-wide drawers
3000 for 30"-wide drawers
3600 for 36"-wide drawers
4200 for 42"-wide drawers
Prices for Steps 1-3.
9R12400 $35
9R13000 $35
9R13600 $38
9R14200 $38
9R22400 $68
9R23000 $68
9R23600 $68
9R24200 $68
9R124!
9R130!
9R136!
9R142!
9R224!
9R230!
9R236!
9R242!
==================
Meridian
®
Stackable
™
Lateral File Accessories
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 83
Movable Divider, Meridian
®
,
Quadrant
®
or Tu
®
Lateral File
Product Information
Description
This adjustable metal divider fits into slots of an 18"- or 20"-deep
Meridian
®
Stackable
™
lateral file drawer. The 18"-deep divider also fits
into a pullout shelf’s slots on a Tu
®
or Quadrant
®
5-high lateral file.
Finish is black umber.
Dimensions
Specification Information
Step 1.
9M
Step 2. Quantity
100 1 divider
300 3 dividers
Step 3. Depth
18 for Meridian
®
18"-deep Stackable
™
lateral file modules or
Quadrant
®
20" deep flipper door with pullout shelf
20 for Meridian
®
20" deep Stackable
™
lateral file modules
Prices for Steps 1-3.
9M100 18 $26
20 $26
9M300 18 $56
20 $56
9M100!
9M300!
Meridian
®
Stackable
™
Lateral File Accessories
==================
84 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
File Drawer Organizer
Product Information
Description
This 2-sectioned organizer fits into any file drawer arranged for letter-
size filing. The removable top section stores computer disks and
other small items. The bottom section stores larger items or can be
divided into 3 compartments; it includes 2 vertical dividers. Finish is
black umber.
Dimensions
Specification Information
Step 1.
LG901 $127
LG901!
==================
Meridian
®
Stackable
™
Lateral File Accessories
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 85
EnhancedAccess
™
Pull
Product Information
Description
This plastic loop-style pull slides into the standard pull or Tu
®
W-pull
on a pedestal or lateral file drawer. It makes the drawer easier to
open. Package contains 1 pull and attachment hardware.
Dimensions
Specification Information
Step 1.
EAP-
Step 2. Pull Style
L loop
Prices for Steps 1-2.
EAP-L $79
Step 3. Finish
HF inner tone light +$0
MT medium tone +$0
EAP-L!
Meridian
®
Stackable
™
Lateral File Accessories
==================
86 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Label Holders-Snap In and
Adhesive, Meridian
®
or Tu
®
Lateral File
Product Information
Description
These label holders snap in place for standard pull file drawers or
attach with adhesive onto drawers with other pull styles. Package
contains 25 of the specified style. Labels included.
Dimensions
Specification Information
Step 1.
9LH A
Step 2. Style
5HV snap in A
7HT adhesive A
Prices for Steps 1-2.
9LH5HV $34
9LH7HT $30
9LH5H!
9LH7H!
=====================
Meridian
®
Keyless Locks
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 87
Keyless Lock
Product Information
Description
This keyless lock replaces an existing cam lock and is available in 2
mode options. Locker mode allows for a temporary code to be entered
for each use, and station mode allows for repeated use with the same
code. Multiple orientation options allow the keyless lock to be used
with a variety of products.
Notes
Replacement battery is a 3-volt lithium CR2032 battery.
Actual lock dimensions are 3.86"W×1.00"H×0.39"D.
Meridian
®
standard pull 2600 series, the Tu
®
metal pedestal, and
some Tu metal lateral files will not accommodate the width of the
keyless lock.
Order the following products separately:
• Control key fob (MKL-CKF)
• User key fob (MKL-UKF)
This keyless lock can be found under the Meridian
®
product line code
of MS.
Dimensions
Specification Information
Step 1.
MK A
Step 2. Mode
L- locker mode A
S- station mode A
Step 3. Orientation
HL horizontal, keypad facing left A
HR horizontal, keypad facing right A
VU vertical, keypad facing up A
VD vertical, keypad facing down A
Prices for Steps 1-3.
MKL-HL $289
MKL-HR $289
MKL-VU $289
MKL-VD $289
MKS-HL $289
MKS-HR $289
MKS-VU $289
MKS-VD $289
Step 4. Finish
0I silver A +$0
BK black A +$0
MKL-H!
MKL-V!
MKS-H!
MKS-V!
Meridian
®
Keyless Locks
=====================
88 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
Keyless Lock, Control Key Fob
Product Information
Description
This key fob opens the keyless lock without using the numeric
keypad.
Notes
Order the following products separately:
• Keyless lock (MK)
• User key fob (MKL-UKF)
This keyless lock, control key fob can be found under the Meridian
®
product line code of MS.
Dimensions
Specification Information
Step 1.
MKL-CKF A $249
MKL-C!
=====================
Meridian
®
Keyless Locks
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 89
Keyless Lock, User Key Fob
Product Information
Description
This key fob opens the keyless lock without using the numeric
keypad.
Notes
Order the following products separately:
• Keyless lock (MK)
• Control key fob (MKL-CKF)
This keyless lock, user key fob can be found under the Meridian
®
product line code of MS.
Dimensions
Specification Information
Step 1.
MKL-UKF A $249
MKL-U!
90 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 91
Index by Product Name
Index: Product Name
Meridian
®
Lateral Files
Bevel-Pull Mobile Lateral Filepage(s)61
page(s)61
EnhancedAccess
™
Pull85
85
File Drawer Organizer84
84
Front-to-Back Filing Rail, Meridian
®
Stackable
™
Lateral File81
81
Keyless Lock87
87
Keyless Lock, Control Key Fob88
88
Keyless Lock, User Key Fob89
89
Label Holders-Snap In and Adhesive, Meridian
®
or Tu
®
Lateral File86
86
Meridian
®
Arc-Pull Freestanding Lateral File28
28
Meridian
®
Bar-Pull Freestanding Lateral File33
33
Meridian
®
Bevel-Pull Freestanding Lateral File39
39
Meridian
®
Ellipse-Pull Freestanding Lateral File44
44
Meridian
®
File Top70
70
Meridian
®
Low Credenza65
65
Meridian
®
Sloped-Pull Freestanding Lateral File50
50
Meridian
®
Standard-Pull Freestanding Lateral File23
23
Meridian
®
Storage Surround End77
77
Meridian
®
Storage Surround Support Legs79
79
Meridian
®
Storage Surround Top74
74
Movable Divider, Meridian
®
, Quadrant
®
or Tu
®
Lateral File83
83
Retrofit Cushion Top55
55
Side-to-Side Filing Rail, Meridian
®
Stackable
™
Lateral File82
82
Standard-Pull Mobile Lateral File57
57
92 Meridian
®
Lateral Files Price Book (9/24) HermanMiller
HermanMiller Meridian
®
Lateral Files Price Book (9/24) 93
Index by Product Number
Index: Product Number
2D-30 Meridian
®
Arc-Pull Freestanding Lateral Filepage(s)28
page(s)28
2D-36
2D-42
2J-30 Meridian
®
Ellipse-Pull Freestanding Lateral File44
44
2J-36
2J-42
2KP-3 Meridian
®
Bar-Pull Freestanding Lateral File33
33
2KP-4
9LH5H Label Holders-Snap In and Adhesive, Meridian
®
or Tu
®
Lateral
File86
86
9LH7H
9M100 Movable Divider, Meridian
®
, Quadrant
®
or Tu
®
Lateral File83
83
9M300
9P001 Front-to-Back Filing Rail, Meridian
®
Stackable
™
Lateral
File81
81
9P002
9P361
9P362
9R124 Side-to-Side Filing Rail, Meridian
®
Stackable
™
Lateral File82
82
9R130
9R136
9R142
9R224
9R230
9R236
9R242
24-30 Meridian
®
Bevel-Pull Freestanding Lateral File39
39
24-36
24-42
26-30 Meridian
®
Standard-Pull Freestanding Lateral File23
23
26-36
26-42
29P-3 Meridian
®
Sloped-Pull Freestanding Lateral File50
50
29P-4
C2K-3 Meridian
®
Low Credenza65
65
C2K-4
EAP-L EnhancedAccess
™
Pull85
85
FSEL- Meridian
®
Storage Surround End77
77
FSEM-
FSEV-
FSLR- Meridian
®
Storage Surround Support Legs79
79
FSLS-
FSTL- Meridian
®
Storage Surround Top74
74
FSTM-
FSTT-
FSTU-
FSTV-
LG901 File Drawer Organizer84
84
M24-3 Bevel-Pull Mobile Lateral File61
61
M24-4
M26-3 Standard-Pull Mobile Lateral File57
57
M26-4
MKL-C Keyless Lock, Control Key Fob88
88
MKL-H Keyless Lock87
87
MKL-U Keyless Lock, User Key Fob89
89
MKL-V Keyless Lock87
87
MKS-H
MKS-V
TC1-3 Retrofit Cushion Top55
55
TC1-4
TC2-3
TC2-4
TPL-0 Meridian
®
File Top70
70
TPL-1
TPM-0
TPM-1
TPV-0
HermanMiller
HermanMiller May 2022
Appendix: 20-Day or Less/Assigned Lead-Time Order Information
20-Day or Less/Assigned Lead-Time
Order Information
20-Day or Less and Assigned Lead-Time Programs
20-day or less and assigned lead-time products are designed for
established Herman Miller dealers with pre-approved credit.
Products are distributed from multiple manufacturing facilities
across the United States. All products and options not designated by
an Assigned Lead-Time icon
A
will ship in 20 business days or less
after being acknowledged by Herman Miller. Products and options
designated by an
A
are on the assigned lead-time program and will
ship in 20 days, less than 20 days, or more than 20 days from order
acknowledgement.
Ordering Procedure
Please place orders through Order Manager. If this is not available to
you, place orders through mail or fax. Verbal purchase orders will not
be accepted.
Order Entry fax number for Meridian
®
Filing and Storage: (616) 846 9236.
Order Entry fax number for all other products:
(616) 654 3085.
For more information, contact your Customer Care representative at:
(866) 854 3048 ext 3400.
Shipments and Delivery
Per Herman Miller Terms and Conditions.
Changes and Cancellation
Per Herman Miller Terms and Conditions.
HermanMiller
HermanMiller May 2022
Appendix: Keyed-Alike Information
Keyed-Alike Information
Keyed-Alike Locks
All components with locks may be specified keyed alike. Products
with keyed-alike locks will be shipped with lock chassis installed.
Installation of lock cylinders will be on-site according to instructions
provided. Herman Miller, Inc., will not be responsible for lock cylinder
installation.
When specifying product keyed-alike, include separate lines on
your order for the lock cylinders.
For Action Office
®
, Ethospace
®
, and Supplemental products,
list
cylinder part number and key number (232092-XXX); select a key
number (or numbers) between 226 and 427, excluding numbers 408
and 412.
The following products require a different lock cylinder part
number Specify UKY001-XXX for these products only; select a key
number (or numbers) between 226 and 427, excluding numbers 408
and 412.
A3013.
A3053.
G5180.
G5181.
G5280.
The keys provided in 232092-XXX and UKY001-XXX kits work with
either cylinder type, provided the key numbers match.
For Tu
®
Storage, Canvas Office Landscape
®
, and Meridian
®
Storage, see the following charts.
Keyed-alike locks are field installed.
To order keyed-alike locks for Action Office
®
Series 1 and 2 door
panels, please contact Customer Care.
A master key can be used to open any lock on an attached or
freestanding component. In addition, a removal key or lock change
tool is required to remove lock plugs. Customers interested in
ordering master keys, removal keys, or lock change tools should
contact Customer Care.
For Canvas overhead and lower storage units, specify as follows:
Specification Part
Code Number Color Lock Series
KA 1B2JK7-XXX
1
chrome UM series 226-427
For Canvas Metal Storage, Meridian Storage, and Tu Storage, specify
as follows:
Specification Key
Code Number Color Lock Series
KA 232092-XXX
1
black UM series 226-427
KA 1B2JK7-XXX
1
chrome UM series 226-427
For Canvas Metal Desk overhead units, specify as follows:
Specification Key
Code Number Color Lock Series
KA 232092-XXX
1
black UM series 226-427
KC 1B2JK7-XXX
1
chrome UM series 226-427
Key Number:
XXX
1
= a key number between 226 and 427 (excluding 408 and 412)
Appendix: Vary Easy Program
Program Overview
The Vary Easy program offers expanded product selections beyond
what is available through our standard offering. From expanded
material and finish lists, to size availability, to completely new
product configurations, the Vary Easy program offers it all at standard
pricing, warranty, and lead-time.
Specifying Vary Easy using Made-to-Measure Plus
Vary Easy products are now available by clicking the Vary Easy/
Options tile in the Made-to-Measure Plus tool.
Made-to-Measure Plus is a web-based tool available through Omni
that takes the guesswork out of specifying products and service
parts. It’s quickly evolving to become your one-stop shop for
specifying Herman Miller products and service parts, particularly
customized product like Vary Easy and HM Options.
Vary Easy products are no longer published in marketing SIF for
importing into specIT and other third-party specifiers. Specifying
through the Made-to-Measure Plus tool allows us to make frequent
updates and offer more complex products. It allows you to easily
specify and price products and download SIF files to import into
your specification tool. The acknowledgement process for Vary Easy
products is the same as for any standard order. Vary Easy products
ship with a standardized lead-time and are competitively priced.
For step-by-step instructions, reference the Made-to-Measure Plus
page under Tools & Resources on Omni to watch the how-to video
and to see how easy it is to specify Vary Easy products in Made-to-
Measure Plus.
For Vary Easy product and specification questions, contact Product
Services at 866 854 3048 (ext #1).
For technical questions about the Made-to-Measure Plus tool,
contact Sales Technology Support at 866 854 3048 (ext #4) or sts@
hermanmiller.com.
Vary Easy Program
June 2022 HermanMiller
HermanMiller April 2023
Appendix: Stain-to-Match Program
Stain-to-Match Program
Stain-to-Match Program
Program Overview
The Stain-to-Match program gives you the option of using veneer
finishes that are not listed in the standard offering. The program allows
Herman Miller to match a customer’s existing recut or natural veneer, or
create a new finish that is unique to an installation.
Specific information on approval, ordering, pricing, and warranty for
the Stain-to-Match program is listed below. Questions and requests for
assistance may be directed to Herman Miller Options at:
(800) 654 3910
Ordering Products with Stain-to-Match Veneers
1. Fill out the Options Stain-to-Match Request Form and send along
with a color sample (2” x 3” minimum) to the Herman Miller
Options Applications Team at the address provided on the form.
The form can be found on Omni.
2. Within 7-10 working days, Herman Miller Options will send a
sample of the color-matched stain on Herman Miller veneer to the
requester for the customer’s signed approval.
3. If the sample meets the customer’s approval, sign the reverse
side of the sample, scan and email the approval to:
4. After the stain has been approved, a formal quotation with
special number and pricing can be provided, or the product can
be specified through the Vary Easy program, if available. Work
with the Options team on final product needs and how to specify.
5. A purchase order can then be placed.
Stain-to-Match Warranty
Herman Miller warrants its products to be free from defects in
craftsmanship from the date of delivery for the applicable warranty
period. Herman Miller is responsible for the physical properties of the
veneers available through the Stain-to-Match program, which include:
STA: Stain-to-Match on Recut Ash
STC: Stain-to-Match on Cherry
STD: Stain-to-Match on Oak
STK: Stain-to-Match on Reltech Anigre (Geiger)
STP: Stain-to-Match on Maple
STU: Stain-to-Match on Walnut (Geiger)
See your specification tool for product specific finish offering
limitations.
HermanMiller
Appendix: Customer’s Own Material/Customer’s Own Leather Order Information — Cushion Tops
HermanMiller February 2020 1
Customer’s Own Material/
Customer’s Own Leather
Order Information — Cushion Tops
Customer’s Own Material/Customer’s Own Leather
Program Overview
The Customer’s Own Material (COM) and Customer’s Own Leather
(COL) program gives you the option of using textiles other than those
listed. Herman Miller will test textiles for application to Herman Miller
products and will process orders for those with approved COM/COL
textiles only. COM/COL are assigned lead time textiles.
Omni lists an overview of fabrics and leathers that have been
tested and indicates whether or not they were approved for
application to Herman Miller products.
Specific information on the terms and conditions, testing,
approval, and ordering process for COM/COL is listed below.
Questions about the COM/COL program and requests for assistance
may be directed to your COM representative at:
(616) 654 3400
(866) 854 3048 ext 6543400
Customer’s Own Material/Customer’s Own Leather Warranty
Herman Miller does not warrant COM/COL textiles. COM/COL textiles
are tested for application only; they are not tested for performance.
The Herman Miller warranty does apply to the underlying products.
Suppliers of COM/COL textiles are responsible for color
consistency within commercial tolerances, UV stability, and
resistance to soiling and perspiration.
Customer’s Own Material/Customer’s Own Leather Pricing
COM is a Category 1 fabric. There are no application charges for
COM fabrics. COL is a Category 7 textile; refer to prices on specific
products to determine the application charge.
Ordering and payment for COM/COL textile yardage are the
responsibility of the customer and the textile supplier.
If desired, Herman Miller will purchase COM textiles directly from
Maharam, Camira, C.F. Stinson, Guilford of Maine, Luna Textiles,
Momentum Textiles and Ultrafabrics to simplify ordering and
shipment. For this service, refer to the Supplier Connection program
in Omni.
Application Note
Herman Miller does not guarantee that Customer’s Own Material
(COM) fabric patterns will align across panels/tiles or from one
screen to the next. We also do not guarantee that COM fabric designs
will be positioned consistently in the same location across several
panels, tiles, or screens.
Textile Approval
1. Select a COM/COL textile.
2. If your textile does not show as tested in Omni, submit a request.
You will be required to select a specific color of the textile and
feature of the product to test, i.e., seat, back, etc.
3. Herman Miller will notify you of approval or disapproval within
4 days from receipt of the test yardage.
Ordering Products with COM/COL
1. Refer to the specific products to determine the yardage required
for COM/COL textiles.
Note: Yardage requirements are based on nondirectional, 54”-
wide textiles. Additional yardage may be needed due to the
unique characteristics of a textile.
2. Obtain the COM ID# in Omni. If the color you are ordering does
not have a COM ID# assigned, click “Create ID”.
3. Enter your order on Order Manager in Omni.
4. Upon receipt of your purchase order, Herman Miller will send you
a PO acknowledgment.
5. Arrangements must be made for the textiles to be shipped from
the supplier to Herman Miller for application to the seating
products. See Omni for shipping procedures and current shipping
addresses or contact a COM representative at (616) 654 3400 or
(866) 854 3048 ext 6543400.
Products will be scheduled for production when COM/COL
textiles are received at Herman Miller. Standard lead times in
effect at that time will apply.
Note: If textiles are to be purchased directly by Herman Miller
through the Supplier Connection program, Herman Miller will
handle the ordering and shipping process and will schedule
your order for production upon receipt of your purchase order
(dependent on textile availability). Refer to the Supplier Connection
program for more information.
Appendix: Customer’s Own Material/Customer’s Own Leather Order Information — Cushion Tops
2 February 2020 HermanMiller
Customer’s Own Material/
Customer’s Own Leather
Order Information — Cushion Tops
continued
Supplier Connection
Program Overview
The Supplier Connection program is a service offered by Herman Miller
to purchase approved COM textiles directly from Maharam, Camira,
C.F. Stinson, Guilford of Maine, Luna Textiles, Momentum Textiles
and Ultrafabrics. When you select a textile through this program,
Herman Miller will facilitate the ordering, scheduling, and shipment of
the textile directly with the supplier.
Suppliers included in the Supplier Connection program keep an
active inventory of textiles that are pre-approved for application to
Herman Miller products. Pre-approval applies only to the suitability
of a textile for manufacturing and application to a Herman Miller
product. Omni provides an overview of fabrics that have been tested
and indicates whether or not they were approved for application to
Herman Miller products.
Specific information on the terms and conditions, testing,
approval, and ordering process for the Supplier Connection program
is listed below. Questions and requests for assistance may be
directed to your COM representative at:
(616) 654 3400
(866) 854 3048 ext 6543400
Supplier Connection Warranty
Textiles purchased by Herman Miller through the Supplier Connection
program are COM and are not warranted by Herman Miller. COM
textiles are tested for application only; they are not tested for
performance. The Herman Miller warranty does apply to the underlying
products.
Suppliers of COM textiles are responsible for color consistency
within commercial tolerances, UV stability, and resistance to soiling
and perspiration.
Supplier Connection Pricing
Textiles purchased by Herman Miller through the Supplier Connection
program are COM. COM is a Category 1 fabric. There are no
application charges for COM fabrics.
Payment for textiles purchased by Herman Miller through the
Supplier Connection program is the responsibility of the customer
or dealer. Herman Miller will invoice the order at a total product cost
based on the supplier’s price published at the time of the order.
Textile Approval
1. Select a COM/COL textile.
2. If your textile does not show as tested in Omni, submit a request.
You will be required to select a specific color of the textile and
feature of the product to test, i.e., seat, back, etc.
3. Herman Miller will notify you of approval or disapproval within
4 days from receipt of the test yardage.
Ordering Products with Supplier Connection COM
1. Identify and include the following information on your purchase
order:
• Product number and option
• Herman Miller’s COM identification number
2. Enter your order on Order Manager in Omni.
3. Upon receipt of the purchase order, Herman Miller will process
your order and send you a PO acknowledgment. Herman Miller
will determine the yardage required to produce your product and
will order and schedule for delivery the required textile. Standard
lead times in effect at the time the textile is allocated at the
supplier will apply to products ordered through this program.
HermanMiller August 2024 1
Appendix: Textiles Application Chart — Seating
Textiles Application
Chart — Seating
• Available
A
Assigned lead-time textile.
A
Maharam textiles are on assigned
lead times.
[N] Non-woven textile.
See below for exception notes.
Price Category 1
COM Customer’s Own Material
A
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
231_ _ 8Z Pellicle
®
•
1A7_ _ AireWeave
™
2 •
8T_ _ Crossing • • • • • • •
3DE_ _ Dex • • • • • • • • • • 19 • • • •
4RM_ _ Duo •
6V_ _ Flexnet
™
•
845_ _ Intercept •
365_ _ Interweave 2 • •
4W_ _ Lyris 2
™
•
1MN_ _Monologue 24 22 • • • • • • • • • • • •
5H2_ _ Ripple 3D Knit •
5H1_ _ Splash 3D Knit •
4SC_ _ Scatter • • • • • • • • • • • • • • • •
3DN_ _ Scribe 25 22 • • • • • • • • •
3DK_ _ Stretch Knit A 25
235_ _ Tailored • • • • • • • • • 23 • 7 •
9NK_ _ Tuck 3D Knit •
1WS_ _Whisper 24 • • • • • • • • • • • • • • •
Price Category 2
3AR_ _ Aristo • • • • • • • • • • • • • 9 • •
92_ _ Crepe • • • • • • • • • • • • • • • • •
3EP_ _ Epic • • • • • • • • • • 7 •
3DP_ _ Hint • • • • • • • • • • •
1MV_ _ Marvel [N] 25 22 • • • •
1HA_ _ Medley • • 22 • • • • • • • • • • • • •
4ME_ _ Mellow • 22 • • • • • • • • • • • • • •
ZMA_ _ Metaphor - Maharam A 16 16 • • • • • • • • • • •
8I1_ _ Muse - Maharam A 16 16 • • • 26 •
30_ _ Rhythm 23 • • • • • • • • • • • • • •
3SL_ _ Sequel [N] 27 27 27 27 27 27 27 27 8 27 • • • • • 23 • •
4TE_ _ Terra • 22 • • • • • • • • • • 7 •
8R_ _ Twist
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Price Category 3
3AC_ _ Ace 25 • • • • • • 8 • • 19 • •
43Z_ _ Fractal • • • • • • • • • • • • • • • •
8M_ _ Latitude
™
23
ZM2_ _ Meld - Maharam * A • • • • • • • • • • • • • • • •
4GE_ _ Parcel • • • • • • • • • • • • • •
Price Category 4
3DM_ _Daydream 25 • • • • • • • • • • • • •
ZLR_ _ Lariat - Maharam [N] A • • • • • • • • • 20 • •
3SY_ _ Sync • • • • • • • • • • • • • • •
Aeron
®
Chairs
Asari
Work Chairs by Herman Miller
™
Cosm
™
Chairs
Mirra
®
2 Chairs/Stools
Embody
®
Chairs
Fuld Nesting Chairs
Sayl
®
Work Chairs/Stools
Sayl Side Chairs
Setu
®
Chairs/Stools
Zeph
®
Chairs
Verus
™
Work Chairs/Stools Back
Verus Work Chairs/Stools Seat
Verus Side Chairs Back
Verus Side Chairs Seat
Verus Plus Chairs
Aside
®
Chairs
Caper
®
Chairs/Stools
Lino
™
Chairs Back
Lino Chairs Seat
OE1 Storage Trolley Cushion Top
Plex
®
Lounge Furniture
Swoop
™
Lounge Seating - Fully Upholstered
Swoop Lounge Seating - Plywood
Valor
™
Seating
Eames
®
Tandem Sling Seating
Cushion Tops
Workspaces
continued on next page
Price Category 5
5YT _ _Arlo - Maharam A • • • • • • •
3CY _ _Cozy • • • • • • • • • • • • • • •
14A _ _ Hopsak • • • • • • • • • • • •
•
•
• • •
40G_ _Method - Maharam A 16 16 • • • • • • • • • • • • •
ZNC_ _Nico - Maharam A • • • • • • • • • • • • • •
3SU _ _Summit [N] • • • • • • • • • • • • • •
Price Category 6
35_ _ Balance
•
Price Category 7
COL Customer’s Own Leather
A
1 8 1 1
ZB3_ _ Beck - Maharam A 16 16 • • • • • • • • • • •
8PV_ _Mantle - Maharam A 16 16 • • • • • • • • • • •
5K3_ _Rowan - Maharam A 16 16 • • • • • • • • • • • •
Price Category 8
ZLU_ _ Luce - Maharam A • 16 16 • • • • • • • • • • •
Price Category 9
ZC0_ _ Campana - Maharam A 16 16 • • • • • • • • • •
ZGE_ _ Gemma - Maharam A • • • • • • • • • • • • • • •
ZJA_ _ Jasper - Maharam A 16 16 • • • • • • 7
21_ _ Leather [N] 23 8
•
•
•
•
Price Category 10
3KH_ _Firma - Maharam A 16 • • • • • • • • • • • • •
ZGF_ _ Gemma Multi - Maharam A • • • • • • • • • • • • • • •
ZGF_ _ Gemma Multi Reverse - Maharam A • • • • • • • • • • • • • • •
ZP4_ _ Petra - Maharam A 16 16 • • • • • • • • •
Price Category 11
3BS_ _Felix - Maharam A 16 16 • • • • • • • • • • • •
Price Category A
No fabrics available at this time.
Price Category B
VM_ _ Medium - Maharam A • • • • • • • • • • • •
TI_ _ Messenger - Maharam * A • • • • • • • • • • • • • 26 • •
Price Category C
Z27_ _ Manner - Maharam A • • • • • • • • • • • • •
887_ _ Merit - Maharam A • • • • • • • • • • • • •
Z3_ _ Metric - Maharam A • • • • • • • • • • • • • • • •
8EY_ _ Murmur - Maharam A • 16 • • • • • • • 7
Price Category D
8I8_ _ Bluff - Maharam [N] A 16 16 • • • • • 8 21 • • •
ZMD_ _ Mode - Maharam A 18 • • • • • • • • • • • • • •
Price Category E
ZAT_ _ Article - Maharam [N] A 16 16 • • • • • • 7
Appendix: Textiles Application Chart — Seating
2 August 2024 HermanMiller
Textiles Application
Chart — Seating continued
• Available
A
Assigned lead-time textile.
A
Maharam textiles are on assigned
lead times.
[N] Non-woven textile.
See below for exception notes.
Aeron
®
Chairs
Asari
Work Chairs by Herman Miller
™
Cosm
™
Chairs
Mirra
®
2 Chairs/Stools
Embody
®
Chairs
Fuld Nesting Chairs
Sayl
®
Work Chairs/Stools
Sayl Side Chairs
Setu
®
Chairs/Stools
Zeph
®
Chairs
Verus
™
Work Chairs/Stools Back
Verus Work Chairs/Stools Seat
Verus Side Chairs Back
Verus Side Chairs Seat
Verus Plus Chairs
Aside
®
Chairs
Caper
®
Chairs/Stools
Lino
™
Chairs Back
Lino Chairs Seat
OE1 Storage Trolley Cushion Top
Plex
®
Lounge Furniture
Swoop
™
Lounge Seating - Fully Upholstered
Swoop Lounge Seating - Plywood
Valor
™
Seating
Eames
®
Tandem Sling Seating
Cushion Tops
Workspaces
continued on next page
HermanMiller August 2024 3
Appendix: Textiles Application Chart — Seating
Textiles Application
Chart — Seating continued
• Available
A
Assigned lead-time textile.
A
Maharam textiles are on assigned
lead times.
[N] Non-woven textile.
See below for exception notes.
Price Category F
82T_ _ Apt - Maharam [N] A 18 • • • • 7
871_ _ Brindle - Maharam A 16 16 • • • • • • •
87Z_ _ Conduit - Maharam A 16 16 • • • • • • 7
74M_ _Instill - Maharam [N] A 18 16 • • • • • • • • 7
89N_ _ Keen - Maharam A 16 16 • • • • • • • •
V9G_ _ Ledger - Maharam [N] A 18 16 • • • • • • • •
ZLL_ _ Loop - Maharam A 16 16 • • 8 • •
82A_ _Multiply - Maharam A 16 16 • • • • • • • • •
8LW_ _Pepper - Maharam A 16 16 • • • • 21 • 9 •
Z33_ _ Strum - Maharam [N] A 16 • • 7
Price Category G
ZC2_ _ Compound - Maharam [N] A 16 16 • • • • 8 • • • • 7
ZF1_ _ Fold - Maharam [N] A 16 16 • 7
8AR_ _ Gild - Maharam A 16 • • • • 21 • • •
ZPR_ _ Pare - Maharam A 18 16 • • 8 • • • • 7
ZRF_ _ Runner - Maharam A 16 16 • • •
Price Category H
ZT_ _ Circles - Maharam A 16 16 •
ZK_ _ Dot Pattern - Maharam A • • • • • • • • •
ZL_ _ Small Dot Pattern - Maharam A • • • • • • • • •
Price Category I
7CW_ _Cursive - Maharam A 16 16 • • • • 8 • • • • •
ZSY_ _ Study - Maharam A • •
Price Category J-K
No fabrics available at this time.
Price Category L
ZMK_ _ Minicheck - Maharam A • • • • • • • • 7
Price Category M
ZF2_ _ Fruit - Maharam
A
16 • 7
Price Category N-Q
No fabrics available at this time.
Price Category R
Stow Leather •
Price Category S-Z
No fabrics available at this time.
Aeron
®
Chairs
Asari
Work Chairs by Herman Miller
™
Cosm
™
Chairs
Mirra
®
2 Chairs/Stools
Embody
®
Chairs
Fuld Nesting Chairs
Sayl
®
Work Chairs/Stools
Sayl Side Chairs
Setu
®
Chairs/Stools
Zeph
®
Chairs
Verus
™
Work Chairs/Stools Back
Verus Work Chairs/Stools Seat
Verus Side Chairs Back
Verus Side Chairs Seat
Verus Plus Chairs
Aside
®
Chairs
Caper
®
Chairs/Stools
Lino
™
Chairs Back
Lino Chairs Seat
OE1 Storage Trolley Cushion Top
Plex
®
Lounge Furniture
Swoop
™
Lounge Seating - Fully Upholstered
Swoop Lounge Seating - Plywood
Valor
™
Seating
Eames
®
Tandem Sling Seating
Cushion Tops
Workspaces
continued on next page
Appendix: Textiles Application Chart — Seating
4 August 2024 HermanMiller
Textiles Application
Chart — Seating continued
• Available
A
Assigned lead-time textile.
A
Maharam textiles are on assigned
lead times.
[N] Non-woven textile.
See below for exception notes.
22 Not available on Sayl side chairs with upholstered backs.
23 Available in select colors. Refer to “Textile Colors” for color
offering.
24 Not available on Sayl upholstered High-Back Work Chairs.
25 Not available on Sayl upholstered back work chairs.
26 Available in select colors. Refer to “Textile Colors” for color
offering.
27 Not available in 3SL15 Carbon Dark.
1 Refer to price book appendices and Omni for COM/COL information.
7 Available on 1” Cushion Tops only.
8 Only available on the Aside nonupholstered outer back option (PB).
9 Available on Valor upholstered seat only.
16 Available on Sayl Chair seat.
18 Available on Sayl Chair seat and upholstered mid-back.
19 Available on Plex seat only.
20 Not available on Plex Club Chair with Headrest.
21 Available on Plex seat and on Ottoman.
Application Note: Herman Miller cannot guarantee material/pattern alignment in adjacent products. For example, a fabric’s pattern may not align
from one pedestal cushion top to the next, or from one chair to another.
* Available in select colors on 20-day lead-time. Refer to “Maharam Colors - Seating” for 20-day colors.
Appendix: Textile Colors
HermanMiller August 1
Textile Colors
Price Category 1
Customer’s Own Material
See Order Information in
Appendices. Assigned lead-time
textile.
A
8Z Pellicle
®
Seating
For New Aeron
®
Chairs
% elastomeric
% polyester
Mineral
Carbon
Graphite
AireWeave™ 2
Seating
For Mirra
®
Chairs
% elastomeric
% antimony-free polyester
A Alpine
A Slate Grey
A Graphite
A Lime Green
A Cappuccino
A Urban Orange
A Dark Turquoise
A Twilight
Chain
Workspaces
” wide
% recycled polyester
with % ocean bound plastic
V Pearl
V Oyster
V Wheat
V Linen
V Wicker
V Bamboo
V Sage
V Spring Wood
V Iceberg
Crossing
Seating/Workspaces
” wide
% antimony-free polyester
% polyester
T Wicker *
T Porcelain *
T Warm Grey *
T Tomato
T Cerulean
T Indigo
T Shale *
T Tin *
T Graphite
T Black
Crossing
Workspaces
For workspaces products only.
” wide
% antimony-free polyester
% polyester
Ivory *
Oyster *
* Colors available on Exclave
®
Video-friendly Tackable Boards
and Stowage Tackable Backdrop
Dex
Ancillary/Seating/Workspaces
” wide
% recycled polyester
% polyester
DE Frost
DE Silver Pine
DE Stone
DE Shale
DE Charcoal
DE Gossamer
DE Pine
Duo
Seating
For Lino
™
Chairs
% polyester
% elastomeric
RM Mineral
RM Poppy
RM Green Leaf
RM Jade
RM Shadow
RM Graphite
Flexnet
™
Seating
For Caper
®
Chairs
% elastomeric
% polyester
V Black
V Silver Grey
Grasscloth
Workspaces
” wide
% recycled polyester
with % ocean bound plastic
I Silver Birch
I Pampas
I Sedge
I Lea
I Taro
I Steam Grey
I Gravel
Intercept
Seating
For Cosm
™
Chairs
% elastomeric
% polyester
Graphite
Carbon
Mineral
Nightfall
Glacier
Canyon
Interweave 2
Seating
For Verus
™
Chairs
% elastomeric
% polyester
Iceberg
Poppy
Beachglass
Blue Grotto
Slate
Shale
Lyris 2
™
Seating
For Setu
®
Chairs
% elastomeric
% polyester
W Alpine
W Chartreuse
W Berry Blue
W Slate Grey
W Chino
W Graphite
Monologue
Ancillary/Seating/Workspaces
” wide
% recycled polyester
% polyester
MN Linen
MN Alabaster
MN Folkstone
MN Silver Pine
MN Slate
MN Seed
MN Persimmon
MN Meadow
MN Blue Sky
MN Blue Spruce
MN Deep Sea
• Maharam textiles are on assigned lead times
A
.
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price category 1 continued on
next page
Appendix: Textile Colors
Resonance
Workspaces
” wide
% polyester
T Greige
T Porcelain
T Alabaster
T Iris
T Sugar
T Tobacco
T Saltbush
T Seed
T Sepia
T Iceberg
T Red
T Boysenberry
T Pistachio
T Green Apple
T Jade
T Blue Green
T Twilight
Scatter
Ancillary/Seating/Workspaces
” wide
% recycled polyester,
with % ocean bound plastic
SC Alpine
SC Fog
SC Shale
SC Persimmon
SC Olive
SC Glacier
SC Blue Sky
SC Lagoon
SC Slate Grey
SC Blue Black
Scribe
Seating/Workspaces
” wide
% recycled polyester
with % ocean bound plastic
DN Spring Wood
DN Poplar
DN Pewter
DN Deep Sea
DN Fir
DN Nutmeg
Slant
Workspaces
” wide
% polyester
% recycled polyester
F Pesto
F Neptune
F Blueberry
F Pumpkin
F Silver Birch
F Bluestone
F Shale
Textile Colors
continued
Ripple 3D Knit
Seating
Available only on Zeph
®
Chairs.
knit to size
% recycled polyester
% lycra
H Black
H Carbon
H Alpine
H Silt
H Tea Rose
H Cocoa
H Persimmon
H Blaze
H Cayenne
H Falcon
H Mustard Seed
H Patina
H Olive
H Moss
H Aloe
H Glacier
H Ultramarine
H Nightfall
H Bluebell
H Boysenberry
H Nightfall/Bluebell
H Patina/Alpine
H Cayenne/Glacier
H Tea Rose/Olive
H Silt/Blaze
Splash 3D Knit
Seating
Available only on Zeph
®
Chairs.
knit to size
% recycled polyester
% lycra
H Black
H Carbon
H Alpine
H Silt
H Tea Rose
H Cocoa
H Persimmon
H Blaze
H Cayenne
H Falcon
H Mustard Seed
H Patina
H Olive
H Moss
H Aloe
H Glacier
H Ultramarine
H Nightfall
H Bluebell
H Boysenberry
Stretch Knit
Seating
Assigned lead-time textile.
A
Available only on Sayl
®
Suspension Back Work Chairs
% polyester, % spandex
DK Fog
DK Slate Grey
DK Java
DK Black
DK Red
DK Green Apple
DK Berry Blue
2 August HermanMiller
• Maharam textiles are on assigned lead times
A
.
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price category continued on
next page
Price Category 1
continued
Appendix: Textile Colors
Tailored
Ancillary/Seating/Workspaces
” wide
% polyester
% recycled polyester
Studio White * **
Sugar *
Tomato
Chive
Cobalt
Cadet
Fog
Graphite
Black
Coffee
* Colors not available on
Plex
™
Lounge Furniture.
** Color not available on Canvas
Tiles.
Tuck 3D Knit
Seating
Available only on Fuld Nesting
Chairs.
knit to size
% polyester
% recycled polyester
NK Alpine
NK Carbon
NK Nightfall
NK Olive
NK Cocoa
NK Canyon
Textile Colors
continued
HermanMiller August 3
Whisper
Ancillary/Seating/Workspaces
” wide
% recycled polyester
% polyester
with .% ocean bound plastic
WS Sand Dollar
WS Pebble
WS Silver Birch
WS Iceberg
WS Silver Pine
WS Carbon
WS Cumin
WS Willow
WS Sea Grass
WS Pool
WS Blueberry
WS Glacier
WS Grey
WS Canyon
Aristo
Ancillary/Seating/Workspaces
” wide
% recycled polyester
% polyester
Acrylic backing
AR Forest Moss
AR Light Brindle
AR Mink
AR Copper
AR Adobe
AR Cherry
AR Lilac
AR Green Apple
AR Surf
AR Waterfall
AR Cadet
AR Tin
AR Pewter
AR Grey Brindle
AR Grey Black
Cord
Workspaces
” wide
% antimony-free polyester
% polyester
Ivory
White Ash
Linen
Bamboo
Sepia
Sesame
Bayou
Spring Woodu
Summer White
• Maharam textiles are on assigned lead times
A
.
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Crepe
Ancillary/Seating/Workspaces
” wide
% recycled polyester,
with .% ocean bound plastic
Licorice
Smoke
Cherry
Cadet
Beachglass
Stone *
Fog *
Slate Grey
Shale
Graphite
Mineral
Persimmon
Juniper
Glacier
Cascade
Navy
* Colors available on Exclave
®
Video-friendly Tackable Boards and
Stowage Tackable Backdrop.
Price Category 1
continued
Price category continued on
next page
Price Category 2
Appendix: Textile Colors
Textile Colors
continued
4 August HermanMiller
Epic
Ancillary/Seating/Workspaces
” wide
% recycled polyester
% polyester
Acrylic backing
EP Alabaster
EP Smoke
EP Falcon
EP Copper
EP Urban Orange
EP Poppy
EP Clover
EP Loden
EP Peacock
EP Cadet
EP Indigo
EP Spring Wood
EP Grey Brindle
EP Seed
EP Carbon Dark
Hint
Ancillary/Seating/Workspaces
” wide
% recycled polyester
% polyester
DP Sediment
DP Gunmetal
DP Silt
DP Porcelain
DP Indigo
DP Fern
DP Adobe
DP Red Sea
Medley
Ancillary/Seating/Workspaces
” wide
% polyester
HA Stone *
HA Trail
HA Charcoal
HA Cinder
HA Chutney
HA Feather Grey *
HA Loden
HA Bayou *
HA Blue Grotto
HA Blueberry
HA Khaki
HA Pewter
HA Yellow Oxide
HA Vintage Rose
HA Raspberry
HA Acai Berry
* Colors available on Exclave
®
Video-friendly Tackable Boards
and Stowage Tackable Backdrop
Mellow
Ancillary/Seating/Workspaces
” wide
% recycled polyester,
with % ocean bound plastic
ME Mineral
ME Olive
ME Glacier
ME Oceanside
ME Charcoal
Horizon
Workspaces
” wide
% antimony-free polyester
% polyester
N Rye Grass
N Sugar Pine
N Silver Pine
N White Ash
N Spring Wood
N Haystack
N Oat Grass
N Pine Cone
N Elderberry
Marvel
Ancillary/Seating
” wide
% pvc-free polyurethane
antimicrobial, antibacterial finish
MV Summer White
MV Sand Dollar
MV Espresso
MV Folkstone Grey
MV Graphite
MV Onyx
MV Polar Blue
MV Blush Grey
MV Red
MV Pine
MV Teal Green
MV Twilight
Metaphor – Maharam
Ancillary/Seating/Workspaces
” wide
% polyester
Acrylic backing
ZMA/- Afterfeather *
ZMA/- Moonflower
ZMA/- Handcraft
ZMA/- Crossroad
ZMA/- Chondrite
ZMA/- Detective
ZMA/- Steamship
ZMA/- Electricity
ZMA/- Takeoff
ZMA/- Parachute
ZMA/- Blueshift
ZMA/- Dockyard
ZMA/- Bathe
ZMA/- Icebound
ZMA/- Thermosphere
ZMA/- Aboard
ZMA/- Agateware
ZMA/- Homeland
ZMA/- Rockfall
ZMA/- Undergrowth
ZMA/- Gremolata
ZMA/- Patina
ZMA/- Sylvan
ZMA/- Outfield
ZMA/- Windbreak
ZMA/- Saguaro
Price Category 2
continued
• Maharam textiles are on assigned lead times
A
.
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price category continued on
next page
Appendix: Textile Colors
Textile Colors
continued
HermanMiller August 5
Metaphor continued
ZMA/- Barnwood
ZMA/- Cookshop
ZMA/- Amandine
ZMA/- Bodhran
ZMA/- Centerstage
ZMA/- Focaccia
ZMA/- Bumblebee
ZMA/- Microbrew
ZMA/- Sauna
ZMA/- Gazebo
ZMA/- Pirouette
ZMA/- Heartbeat
ZMA/- Shino
ZMA/- Sunrise
ZMA/- Florist
ZMA/- Beadwork
ZMA/- Framboise
ZMA/- Wisteria
ZMA/- Warrior
* Colors not available on Eames
Aluminum Group, Soft Pad, Sofa
Compact, Molded Fiberglass/Plastic
Chairs, Task Chair, Wire Chairs,
Nelson Platform Bench Cushion,
Swoop Plywood Lounge Chair.
Muse – Maharam
Ancillary/Seating/Workspaces
” wide
% post-consumer recycled polyester
I/- Crescendo
I/- Resonate
I/- Runway
I/- Ascend
I/- Veil *
I/- Refresh *
I/- Clear *
I/- Fantasy
I/- Miso
I/- Compass
I/- Bergamot *
I/- Grasshopper
Muse continued
I/- Goal
I/- Mistletoe
I/- Seaglass *
I/- Frigid
I/- Riverbend
I/- Noble
I/- Pulsar
I/- Velella
I/- Sailboat
I/- Sparse
I/- Vase
I/- Haven
I/- Mead
I/- Neat
I/- Jovial
I/- Theater
I/- Poinsettia
I/- Celebrate
I/- Spectacle
* Colors not available on Valor
Seating.
Rhythm
Ancillary/Seating
” wide
% polyester
Green Apple
Bayou
Berry Blue
Iris
Twilight
Poppy
Molasses
Khaki
Mink
Black *
Charcoal *
* Colors available on Embody
®
Chair.
• Maharam textiles are on assigned lead times
A
.
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Sequel
Ancillary/Seating/Workspaces
” wide
% vinyl
% polyester knit backing
Resilience
®
finish
SL White
SL Pebble
SL Mushroom
SL Stone
SL Rattan
SL Seal
SL Blue Fog
SL Folkstone
SL Shale
SL Slate Grey
SL Charcoal
SL Carbon Dark
SL Navy *
* Color available on Eames
®
Tandem Sling Seating.
Terra
Ancillary/Seating/Workspaces
” wide
% post-consumer recycled
biodegradable polyester *
TE Spring Wood
TE Zinc
TE Pine Cone
TE Charcoal
* % biodegradation in ,
days under ASTM D
conditions. No evidence of
further degradation.
Twine
Workspaces
” wide
% recycled polyester
TW Silver Birch
TW Ivory
TW Alabaster
TW Bamboo
TW Iceberg
TW Charcoal
TW Feather Grey
TW Shale
Twist
Ancillary/Seating/Workspaces
” wide
% antimony-free polyester
% recycled polyester
% polyester
R Wicker
R Poppy
R Tin
R Shale
R Graphite
R Birch
R Sepia
R Blueberry
R Green Apple
R Gunmetal
R Cinder
R Pekoe
R Forest
R Waterfall
R Midnight Blue
R Carbon Dark
Twist
Workspaces
For workspaces products only.
” wide
% antimony-free polyester
% recycled polyester
% polyester
S Oyster
Price Category 2
continued
Appendix: Textile Colors
Ace
Ancillary/Seating
” wide
% polyurethane
Polyester knit backing
Stain resistant finish
AC Summer White
AC White Ash
AC Rye
AC Metal
AC Clay
AC Chestnut
AC Camelback
AC Chipotle
AC Artichoke
AC Sepia Dark
AC Aloe
AC Flint
AC Blue Sky
AC Oceanside
AC Midnight
AC Frost
AC Lead
AC Black
Fractal
Ancillary/Seating/Workspaces
” wide
% recycled polyester
% polyester
Z Granite
Z Golden Olive
Z Verdant
Z Cadet
Meld continued
ZM/- Bulb
ZM/- Bride
ZM/- Stark
ZM/- Seashell
ZM/- Antler
ZM/- Crater *
ZM/- Perennial
ZM/- Mulberry
ZM/- Fuchsia *
ZM/- Amethyst *
ZM/- Merlot
ZM/- Magma *
ZM/- Rooster
ZM/- Heat *
ZM/- Clementine
ZM/- Fox
ZM/- Kiss *
ZM/- Bare
ZM/- Blonde
ZM/- Mimosa
ZM/- Comet *
ZM/- Honeydew
ZM/- Wild *
ZM/- Vine
ZM/- Seed
ZM/- Kale *
ZM/- Waterfall *
ZM/- Nordic *
ZM/- Reef *
ZM/- Wave
ZM/- Isle **
ZM/- Creek
ZM/- Mariner *
ZM/- Globe
ZM/- Spa
* Colors available on
-day lead time.
** Colors available on
-day lead time.
Ground Cloth
®
Workspaces
” wide
% polyester
Vapor Grey
Warm White *
Fog *
Straw *
Red Orange *
Green Apple *
Caribbean *
Midnight *
Cappuccino *
* Colors available on Exclave
®
Video-friendly Tackable Boards
and Stowage Tackable Backdrop
Latitude
Seating
Colors for Mirra Chairs
% polyester
M Alpine
M Black
M French Press
M Cordovan
M Ochre
M Ultramarine
M Olive
Meld – Maharam
Ancillary/Seating/Workspaces
” wide
% post-consumer recycled polyester
% polyester
PFOA-Free stain resistant
ZM/- Vast
ZM/- Panda **
ZM/- Skyline *
ZM/- Knight **
ZM/- Quill **
ZM/- Pipe
ZM/- Grate *
ZM/- Gloss
Parcel
Ancillary/Seating/Workspaces
” wide
% recycled polyester
GE Gunmetal
GE Brindle
GE Bayou
GE Pesto
GE Golden Olive
GE Copper Sea
Saille - Geiger Textile
Ancillary
” wide
% cotton
% polyester
PFOA-Free stain resistant finish
Acrylic backing
Coal
Shale
Haze
Stone
White *
Beach
Sand
Blush
Brick
Fog
Celadon
Poolside
Summer Sky
Lake
Midnight Blue
* Color not available on Eames
®
Soft Pad Group Chairs/Ottomans.
6 August HermanMiller
Textile Colors
continued
• Maharam textiles are on assigned lead times
A
.
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price category continued on
next page
Price Category 3
Appendix: Textile Colors
Strands
Workspaces
” wide
% recycled polyester
W Pebble
W Porcelain
W Taupe
W Honey
W Khaki
W Rye
W Wicker
W Tin
W Cool Grey
Kalista - Geiger Textile
Ancillary
” wide
% post-industrial recycled cotton
% post-industrial recycled polyester
% polyester
PFOA-Free stain resistant finish
AL Cotton
AL Natural
AL Titanium
AL Pewter
AL Starry Night
AL Red Hot
AL Sun Kissed
AL Dune
AL Beach Glass
AL Bluestone
AL Seaside
AL Night Sky
Lariat – Maharam
Ancillary/Seating
” wide
% vinyl
ZLR/-
ZLR/-
ZLR/-
ZLR/-
ZLR/-
ZLR/-
ZLR/-
ZLR/-
ZLR/-
ZLR/-
ZLR/-
ZLR/-
ZLR/-
ZLR/-
ZLR/-
ZLR/-
ZLR/-
ZLR/-
Textile Colors
continued
Cygnus
Ancillary
For Eames
®
Aluminum Group Chairs
% elastomeric
% polyester
Black
Zinc
Quartz
Daydream
Ancillary/Seating/Workspaces
” wide
% wool
% recycled polyester
% nylon
% polyester
DM Rye Grass
DM Silver Birch
DM Pewter
DM Graphite
DM Black
DM Lemongrass
DM Permission
DM Juniper
DM Sea Grass
DM Nightfall
Hush
Workspaces
” wide
% polyester
% viscose
HS Canyon
HS Pesto
HS Bayou
HS Greystone
HS Charcoal
HS Rye Grass
HS Cool Grey
HS Dark Grey
HS Aqua Green
HS Nightfall
Lariat continued
ZLR/-
ZLR/-
ZLR/-
ZLR/-
ZLR/-
ZLR/-
ZLR/- Granite
ZLR/- Linen
ZLR/- Stella
ZLR/- Saddle
ZLR/- Holly
ZLR/- Maroon
ZLR/- Siren
ZLR/- Reseda
ZLR/- Purslane
ZLR/- Spire
ZLR/- Papyrus
ZLR/- Chickadee
ZLR/- Requiem
Sync
Ancillary/Seating
” wide
% polyester
SY Pine Cone
SY Canyon
SY Truffle
SY Everglade
SY Nightfall
SY Dark Mineral
SY Slate Grey
SY Dark Carbon
SY Black
HermanMiller August 7
• Maharam textiles are on assigned lead times
A
.
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price Category 4Price Category 3
continued
Appendix: Textile Colors
Arlo - Maharam
Ancillary/Seating
% wool
% polyester
YT Turn
YT Embers
YT Parallel
YT Octave
YT Musing
YT Summon
YT Dynamic
YT Signals
YT Aspect
YT Dedicate
YT Juniper
YT Cilantro
YT Hawthorn
YT Thread
YT Spalted
YT Warmer
YT Misted
YT Share
YT Chord
YT Heroic
YT Arpeggio
YT Roots
YT Sumac
YT Purl
YT Homeward
Cozy
Ancillary/Seating
” wide
% wool
CY Heathered Warm Grey
CY Heathered Rye Grass
CY Heathered Cool Grey
CY Heathered Black
CY Heathered Persimmon
CY Heathered Loden
CY Heathered Lagoon
CY Heathered Twilight
Method - Maharam
Ancillary/Seating/Workspaces
” wide
% recycled polyester
with % ocean-bound plastic
G/- Inspire
G/- Rhea
G/- Noise
G/- Speedway
G/- Villanelle
G/- Maestro
G/- Destiny
G/- Possess
G/- Waterside
G/- Relax
G/- Delightful
G/- Parrotlet
G/- Verdurous
G/- Bosky
G/- Acreage
G/- Allude
G/- Tweed
G/- Korma
G/- Fossilize
G/- Cattail
G/- Shortcake
G/- Racecar
G/- Courtship
G/- Jam
G/- Sparrow
Textile Colors
continued
Hopsak
Ancillary/Seating/Workspaces
” wide
% recycled polyester
A Black
A Raw Umber Dark
A Grey Blue Dark
A Sepia Dark
A Emerald Dark
A Yellow Dark
A Orange
A Sienna
A Olive Green Dark
A Crimson
A Crimson Dark Dark
A Violet Dark
A Pink Dark Dark
A Ultramarine Dark
A Cobalt Blue
A Terra Cotta
A Ochre Dark
Ingenue - Geiger Textile
Ancillary
” wide
% wool
% viscose
% acrylic
% polyester
% cotton
PFOA-Free stain resistant finish
GH Sand
GH Fog
GH Flannel
GH Trench
GH Vermillion
GH Adriatic
GH Umber
GH Charcoal
Nico - Maharam
Ancillary/Seating/Workspaces
” wide
% wool
% polyester
% solution-dyed nylon
ZNC/- Alcazar
ZNC/- Ironclad
ZNC/- Tune
ZNC/- Bridegroom
ZNC/- Diode
ZNC/- Jest
ZNC/- Sanctuary
ZNC/- Aquarius
ZNC/- Houseboat
ZNC/- Olympian
ZNC/- Tennis
ZNC/- Dressage
ZNC/- Zing
ZNC/- Bitterroot
ZNC/- Gemini
ZNC/- Posh
ZNC/- Sizzle
ZNC/- Cheerful
ZNC/- Watermelon
ZNC/- Toucan
ZNC/- Rosin
ZNC/- Jousting
ZNC/- Jojoba
ZNC/- Dromedary
ZNC/- Toasty
ZNC/- Casaba
ZNC/- Greenhouse
ZNC/- Sibyl
ZNC/- Spearmint
ZNC/- Pothos
ZNC/- Calathea
ZNC/- Landscape
ZNC/- Espalier
ZNC/- Gecko
ZNC/- Meditation
8 August HermanMiller
• Maharam textiles are on assigned lead times
A
.
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price category continued on
next page
Price Category 5
Appendix: Textile Colors
Summit
Ancillary/Seating
” wide
% silicone
Polyester knit backing
SU Oyster
SU Zinc
SU Sparrow
SU Black
SU Beachglass
SU Midnight
Vionette - Geiger Textile
Ancillary
” wide
% polyester
GJ White Sand Mix
GJ Desert Mix
GJ Light Gray Mix
GJ Pewter Mix
GJ Cobalt Mix
GJ Prussian Blue Mix
GJ Chocolate Mix
GJ Champagne
GJ Morning Sky
GJ Aquatic
GJ Sapphire
GJ Midnight Blue
GJ Shadow
GJ Java
GJ Carbon
GJ Black
GJ Claret
GJ Poppy
Customer’s Own Leather
See Order Information in
Appendices. Assigned lead-time
textile.
A
Bamboo
Ancillary
% bamboo
% polyurethane
BB Ivory
BB Russet
BB Black
Beck – Maharam
Ancillary/Seating
” wide
% wool
% nylon
ZB/- Overshadow
ZB/- Molecule
ZB/- Zeitgeist
ZB/- Blacksmith
ZB/- Cornerstone
ZB/- Chainmail
ZB/- Buckram
ZB/- Callisto
ZB/- Interlude
ZB/- Letterpress
ZB/- Memoir
ZB/- Litmus
ZB/- Stoic
ZB/- Inkpad
ZB/- Praxis
ZB/- Astute
ZB/- Percolate
ZB/- Halocline
ZB/- Semblance
ZB/- Loch
ZB/- Lido
ZB/- Underwater
ZB/- Tetrapod
ZB/- Nymph
ZB/- Appalachian
Textile Colors
continued
Balance
Seating
For Embody
®
chairs
% polyester
Carbon
Black
Outdoor Weave
Ancillary
For Eames
®
Aluminum Group
Outdoor Chairs
% elastomeric
% polypropylene
Lead
Graphite
Beck continued
ZB/- Menthol
ZB/- Woodruff
ZB/- Malachite
ZB/- Botanist
ZB/- Woodlet
ZB/- Katydid
ZB/- Exuberant
ZB/- Retrospect
ZB/- Lambic
ZB/- Argil
ZB/- Brushstroke
ZB/- Candescent
ZB/- Reedbuck
ZB/- Clayware
ZB/- Curio
ZB/- Whimsy
ZB/- Effervescent
ZB/- Lingonberry
ZB/- Resplendent
ZB/- Hollyhock
ZB/- Filigree
ZB/- Plutonic
ZB/- Foundry
ZB/- Patisserie
ZB Gold // *
ZB Russet // *
ZB Indigo // *
ZB Forest // *
* Colors available only on
Girard Color Wheel Ottoman.
HermanMiller August 9
• Maharam textiles are on assigned lead times
A
.
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price category continued on
next page
Price Category 6Price Category 5
continued
Price Category 7
Appendix: Textile Colors
Bellano - Geiger Textile
Ancillary
” wide
% wool
% linen
% nylon
% alpaca
AX Pearl
AX Fog
AX Fawn
AX Pumice
AX Pewter
AX Atlantic
AX Black Green
AX Adriatic
AX Coffee
AX Charcoal
AX Umber
AX Magenta
AX Bittersweet
AX Sunflower
Capri - Geiger Textile
Ancillary
” wide
% cotton
% acrylic
% rayon
% polyester
PFOA-Free stain resistant finish
Acrylic backing
Snow
Stone
Trench
Graphite
Anthracite
Light Silver
Russet
Chestnut Brown
Sand
Sterling
Cobalt
Ink
Panno di Dolce - Geiger Textile
Ancillary
” wide
% wool
% nylon
% alpaca
AV Fog
AV Dune
AV Trench
AV Flannel
AV Charcoal
AV Umber
AV Deep Navy
AV Graphite
AV Orange
AV Pink
AV Deep Red
AV Bright Green
AV Cerulean Blue
AV Deep Cerulean Blue
Pristina - Geiger Textile
Ancillary
” wide
% wool
% viscose
% acrylic
% cotton
% polyester
PFOA-Free stain resistant
JC Dove
JC Goldstone
JC Daybreak
JC Pumice
JC Cappuccino
JC Gunmetal
JC Caspian
JC Café Noir
Textile Colors
continued
Mantle - Maharam
Ancillary/Seating
% recycled polyester
% polyester
% spandex
PV Pavement
PV Future
PV Piper
PV Manifesto
PV Mapo
PV Redwood
PV Rocky
PV Impala
PV Warbler
PV Guild
PV Kinetic
PV Behold
PV Orb
PV Sport
PV Utopia
PV True
PV Galore
PV Parsley
PV Dare
PV Branzino
PV Network
PV Standard
PV Salamander
PV Oscillate
Milaner - Geiger Textile
Ancillary
” wide
% wool, % acrylic
% alpaca, % cotton
% nylon, % rayon
Linen
Flax
Bark
Deep Navy
Charcoal
Medium Grey
Ash
Crimson
Resca - Geiger Textile
Ancillary
” wide
% wool
% linen
% nylon
% alpaca
AW Fog
AW Dune
AW Trench
AW Flannel
AW Umber
AW Bordeaux
Rowan - Maharam
Ancillary/Seating
% wool
% nylon
% acrylic
% linen
K Kingdom
K Northern
K Rabbit
K Elephant
K Furrow
K Heirloom
K Appear
K Repose
K Blackcurrant
K Courage
K Bordeaux
K Cherish
K Brickfield
K Hibiscus
K Carnelian
K Cinnabar
K Toasted
K Revea
K Cortado
K Medallion
K Polenta
10 August HermanMiller
• Maharam textiles are on assigned lead times
A
.
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price Category 7
continued
Price category continued on
next page
Appendix: Textile Colors
Rowan continued
K Prized
K Travertine
K Companion
K Library
K Fable
K Pixie
K Arboretum
K Ease
K Sapling
K Cottonwood
K Scout
K Valleyside
K Ornament
K Zucchini
K Ethereal
K Springtide
K Traverse
K Untold
K Flowing
K Laguna
K Cerulean
K Soundscape
K Message
K Freefall
K Musical
K Puzzle
K Operatic
K Daydream
K Shale
K Forward
K Anthracite
Vesture - Geiger Textile
Ancillary
” wide
% wool, % polyester
% silk, % nylon
PFOA-Free stain resistant finish
Ashen
Dark Blush
Dusk
Medium Gray
Twilight
Breeze - Maharam
Workspaces
” wide
% FR polyester
% post-consumer recycled
FR polyester
QG/- Meteorite
QG/- Serum
Luce - Maharam
Ancillary/Seating
” wide
% post-consumer recycled wool
% polyester
% nylon
ZLU/- Brioche
ZLU/- Blanched
ZLU/- Relic
ZLU/- Sinter
ZLU/- Scoria
ZLU/- Austere
ZLU/- Pigment
ZLU/- Alkali
ZLU/- Tidal
ZLU/- Imbue
ZLU/- Reservoir
ZLU/- Brine
ZLU/- Undertone
ZLU/- Prelude
ZLU/- Submerge
ZLU/- Cypress
ZLU/- Awash
ZLU/- Adriatic
ZLU/- Province
ZLU/- Virescent
ZLU/- Nettle
ZLU/- Agrarian
ZLU/- Serpentine
ZLU/- Laurel
ZLU/- Clarion
ZLU/- Gooseberry
ZLU/- Swelter
ZLU/- Etruscan
ZLU/- Coulis
ZLU/- Rubescent
Textile Colors
continued
Wool Epinglé - Geiger Textile
Ancillary
” wide
% wool
Swiss Red
Orange
Light Chestnut Brown
Light Burnt Umber
Pale Native Umber
Grey
Natier Blue
Deep Cerulean Blue
Anthracite
Natural Native Umber
Chestnut Brown
Wool Tweed - Geiger Textile
Ancillary
” wide
% wool, % nylon
Trench
Pewter
Ruby
Blue Gray
Navy
Umber
Charcoal
Luce continued
ZLU/- Akoya
ZLU/- Radiant
ZLU/- Regent
ZLU/- Spectral
ZLU/- Thistle
Tempo – Maharam
Ancillary
” wide
% polyester
Polyester backing
S/- Chert
S/- Grandstand
S/- Restful
S/- Battleship
S/- Lavender
S/- Dockside
S/- Swimming
S/- Ambience
S/- Adornment
S/- Remedy
S/- Fang
S/- Inshore
S/- Camouflage
S/- Mesclun
S/- Farmland
S/- Tadpole
S/- Purr
S/- Snowman
S/- Beehive
S/- Gazelle
S/- Shiitake
S/- Flaxseed
S/- Crawdad
S/- Flowery
S/- Burgundy
S/- Rangoli
S/- Petunia
S/- Campsite
HermanMiller August 11
• Maharam textiles are on assigned lead times
A
.
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price category continued on
next page
Price Category 8Price Category 7
continued
Appendix: Textile Colors
Whim
Ancillary
” wide
% viscose
% acrylic
% wool
% polyester
DA Warm White
DA Rye
DA Mustard Seed
DA Terra Cotta
DA Fir
DA Navy
DA Pewter
Campana continued
ZC/- Freesia
ZC/- Rhodium
ZC/- Undercoat
ZC/- Airbrush
ZC/- Shellfish
ZC/- Mojave
ZC/- Renaissance
ZC/- Decoupage
ZC/- Outback
ZC/- Millipede
Gemma – Maharam
Ancillary/Seating
” wide
% wool
% nylon
ZGE/- Crinoline
ZGE/- Angelic
ZGE/- Savory
ZGE/- Honeycomb
ZGE/- Gilded
ZGE/- Paddleboat
ZGE/- Stagecoach
ZGE/- Waterbuck
ZGE/- Earnest
ZGE/- Auric
ZGE/- Carmine
ZGE/- Serape
ZGE/- Ferric
ZGE/- Canyon
ZGE/- Alembic
ZGE/- Patio
ZGE/- Sorrel
ZGE/- Root
Textile Colors
continued
Price Category 9
Alpaca Mohair - Geiger Textile
Ancillary
” wide
% alpaca
% cotton, % polyester
Dune
Trench
Vicuna
Sepia
Umber
Fog
Flannel
Charcoal
Campana – Maharam
Ancillary/Seating
” wide
% wool
% nylon
ZC/- Viverine
ZC/- Lithograph
ZC/- Moonscape
ZC/- Brevity
ZC/- Linear
ZC/- Hinterland
ZC/- Mural
ZC/- Sloe
ZC/- Interstellar
ZC/- Mythology
ZC/- Scintillate
ZC/- Succession
ZC/- Visceral
ZC/- Hemisphere
ZC/- Troposhpere
ZC/- Skye
ZC/- Seaward
ZC/- Nemorous
ZC/- Allegory
ZC/- Olivine
ZC/- Reptilian
ZC/- Basil
ZC/- Fanleaf
ZC/- Beachgrass
ZC/- Hayfield
Gemma continued
ZGE/- Mansion
ZGE/- Buff
ZGE/- Starch
ZGE/- Dawn
ZGE/- Countryside
ZGE/- Dewy
ZGE/- Reliquary
ZGE/- Deluge
ZGE/- Overlay
ZGE/- Electron
ZGE/- Sheath
ZGE/- Quietude
ZGE/- Jargon
ZGE/- Powder
ZGE/- Tide
ZGE/- Outwash
ZGE/- Enamored
ZGE/- Smitten
ZGE/- Revere
ZGE/- Mangosteen
ZGE/- Allium
ZGE/- Immense
ZGE/- Chamber
ZGE/- Cosmos
ZGE/- Inkling
ZGE/- Rainwater
ZGE/- Shade
ZGE/- Pendant
ZGE/- Axial
ZGE/- Fervent
ZGE/- Legacy
ZGE/- Caliber
ZGE/- Temple
ZGE/- Evenfall
12 August HermanMiller
• Maharam textiles are on assigned lead times
A
.
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price category 9 continued on
next page
Price Category 8
continued
Appendix: Textile Colors
Jasper - Maharam
Ancillary/Seating
” wide
% wool
% solution-dyed nylon
% cotton
ZJA/- Thrill
ZJA/- Anise
ZJA/- Grapefruit
ZJA/- Lifeguard
ZJA/- Heartfelt
ZJA/- Corsage
ZJA/- Earthenware
ZJA/- Bear
ZJA/- Firelight
ZJA/- Dreamcatcher
ZJA/- Bobcat
ZJA/- Glacial
ZJA/- Vaporize
ZJA/- Trapdoor
ZJA/- Halcyon
ZJA/- Observatory
ZJA/- Steamboat
ZJA/- Aquathlon
ZJA/- Cloudless
ZJA/- Briny
ZJA/- Magical
ZJA/- Picnic
ZJA/- Herbage
ZJA/- Pasture
ZJA/- Courtyard
ZJA/- Leapfrog
Bristol Leather - Geiger Textile
Ancillary
approx. sq. ft. per hide
% leather
- Black
- Putty
- Hunter
- White
- Ivory
- Parchment
- Caribbean
- Pumice
- Smoke
- Charcoal
- Dark Shale
- Downtown Grey
- City Night
- Ash Grey
- Champagne
- Chestnut Brown
- Dark Sienna
- Earthen
- Desert
- British Green
- Paris Blue
- Atlantic
- Camel
- Taupe
- Pure *
- Cream
- Midnight Blue
- Sangria
- Swiss Red
- Nordic Yellow
- Sky Grey
- Natural
* Color not available on Saiba
Chair.
Textile Colors
continued
Leather
Ancillary/Seating
approx. sq. ft. per hide
% leather
Ivory
Black *
Smoke
Graphite
Khaki
Rattan
Truffle
Alpine
Haze
Sable Grey
Dark Mineral **
Dark Carbon ***
Cranberry
Deep Sea
* Armpad color available on
Aeron
®
Chair, Graphite.
** Armpad color available on
Aeron Chair, Mineral.
*** Armpad color available on
Aeron Chair, Carbon.
Firma – Maharam
Ancillary/Seating
” wide
% wool
% nylon
KH/- Wrath
KH/- Pantomime
KH/- Shaded
KH/- Prologue
KH/- Framework
KH/- Railroad
KH/- Grommet
KH/- Lunisolar
KH/- Snowpack
KH/- Coldsnap
KH/- Sealift
KH/- Brood
KH/- Intertidal
KH/- Confide
KH/- Secluded
KH/- Leisure
KH/- Portfolio
KH/- Strato
KH/- Fogbow
KH/- Snowcone
KH/- Kazoo
KH/- Esteem
KH/- Mackerel
KH/- Brooch
KH/- Caesious
KH/- Islet
KH/- Biosphere
KH/- Hilltop
KH/- Arboreal
KH/- Lineage
KH/- Comfrey
KH/- Circe
KH/- Ecosystem
KH/- Knack
KH/- Watt
KH/- Epiphany
KH/- Gamma
KH/- Taxicab
KH/- Varietal
KH/- Tale
HermanMiller August 13
• Maharam textiles are on assigned lead times
A
.
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price category 10 continued on
next page
Price Category 9
continued
Price Category 10
Appendix: Textile Colors
Firma continued
KH/- Elemental
KH/- Cuff
KH/- Emu
KH/- Tempeh
KH/- Tephra
KH/- Shellac
KH/- Emporium
KH/- Keratin
KH/- Camwood
KH/- Gloam
KH/- Novela
KH/- Fruitpunch
KH/- Decant
KH/- Milkshake
KH/- Metaphysic
KH/- Carafe
KH/- Voyager
KH/- Tenebrous
KH/- Subtext
KH/- Silent
Gemma Multi – Maharam
Ancillary/Seating
” wide
% wool
% nylon
ZGF/- Andromeda
ZGF/- Dappled
ZGF/- Lyra
ZGF/- Flaunt
ZGF/- Celluloid
ZGF/- Hydrozoa
ZGF/- Firefly
ZGF/- Pisces
ZGF/- Strath
ZGF/- Erosion
ZGF/- Cabaret
ZGF/- Candytuft
ZGF/- Juice
ZGF/- Fairground
ZGF/- Copperplate
ZGF/- Sunbird
ZGF/- Cinematic
ZGF/- Clairvoyant
Gemma Multi Reverse – Maharam
Ancillary/Seating
” wide
% wool
% nylon
ZGF/- Andromeda
Reverse
ZGF/- Dappled
Reverse
ZGF/- Lyra
Reverse
ZGF/- Flaunt
Reverse
ZGF/- Celluloid
Reverse
ZGF/- Hydrozoa
Reverse
ZGF/- Firefly
Reverse
ZGF/- Pisces
Reverse
ZGF/- Strath
Reverse
ZGF/- Erosion
Reverse
ZGF/- Cabaret
Reverse
ZGF/- Candytuft
Reverse
ZGF/- Juice
Reverse
ZGF/- Fairground
Reverse
ZGF/- Copperplate
Reverse
ZGF/- Sunbird
Reverse
ZGF/- Cinematic
Reverse
ZGF/- Clairvoyant
Reverse
ZGF/- Crocus
Reverse
ZGF/- Memoir
Reverse
Textile Colors
continued
Gemma Multi continued
ZGF/- Crocus
ZGF/- Memoir
ZGF/- Roulette
ZGF/- Voltaic
ZGF/- Compote
ZGF/- Lambent
ZGF/- Twister
ZGF/- Chronicle
ZGF/- Sidereal
ZGF/- Tanzanite
ZGF/- Crystalize
ZGF/- Chromium
ZGF/- Pallium
ZGF/- Spectre
ZGF/- Courgette
ZGF/- Viper
ZGF/- Sunlit
ZGF/- Heavenly
ZGF/- Vernal
ZGF/- Cress
ZGF/- Limn
ZGF/- Horseradish
ZGF/- Shandy
ZGF/- Granary
ZGF/- Percolate
ZGF/- Motor
ZGF/- Unicorn
ZGF/- Lobster
ZGF/- Rhododendron
ZGF/- Taffy
ZGF/- Rishi
ZGF/- Backcountry
ZGF/- Buckthorn
ZGF/- Coniferous
ZGF/- Delphic
ZGF/- Hieroglyph
ZGF/- Eiderdown
ZGF/- Sandbar
ZGF/- Tanager
Gemma Multi Reverse continued
ZGF/- Roulette
Reverse
ZGF/- Voltaic
Reverse
ZGF/- Compote
Reverse
ZGF/- Lambent
Reverse
ZGF/- Twister
Reverse
ZGF/- Chronicle
Reverse
ZGF/- Sidereal
Reverse
ZGF/- Tanzanite
Reverse
ZGF/- Crystalize
Reverse
ZGF/- Chromium
Reverse
ZGF/- Pallium
Reverse
ZGF/- Spectre
Reverse
ZGF/- Courgette
Reverse
ZGF/- Viper
Reverse
ZGF/- Sunlit
Reverse
ZGF/- Heavenly
Reverse
ZGF/- Vernal
Reverse
ZGF/- Cress
Reverse
ZGF/- Limn
Reverse
ZGF/- Horseradish
Reverse
ZGF/- Shandy
Reverse
ZGF/- Granary
Reverse
14 August HermanMiller
• Maharam textiles are on assigned lead times
A
.
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price Category 10
continued
Price category 10 continued on
next page
Appendix: Textile Colors
Gemma Multi Reverse continued
ZGFA/- Percolate
Reverse
ZGFA/- Motor
Reverse
ZGFA/- Unicorn
Reverse
ZGFA/- Lobster
Reverse
ZGFA/- Rhododendron
Reverse
ZGFA/- Taffy
Reverse
ZGFA/- Rishi
Reverse
ZGFA/- Backcountry
Reverse
ZGFA/- Buckthorn
Reverse
ZGFA/- Coniferous
Reverse
ZGFB/- Delphic
Reverse
ZGFB/- Hieroglyph
Reverse
ZGFB/- Eiderdown
Reverse
ZGFB/- Tanager
Reverse
Petra - Maharam
Ancillary/Seating
” wide
% wool
% linen
% nylon
ZP/- Hieroglyph
ZP/- Interior
ZP/- Samovar
ZP/- Calcite
ZP/- Silversmith
ZP/- Rivet
ZP/- Carpolite
ZP/- Bonbon
Felix - Maharam
Ancillary/Seating
% wool
% nylon
BS Angular
BS Shark
BS Easy
BS Cue
BS Rye
BS Champion
BS Between
BS Propose
BS Rising
BS Tile
BS Place
BS Kernel
BS Pinnacle
BS Darling
BS Seasonal
BS Shipmate
BS Jump
BS Geyser
BS Team
Textile Colors
continued
Petra continued
ZP/- Dreamy
ZP/- Bejewel
ZP/- Sashimi
ZP/- Spirula
ZP/- Chalet
ZP/- Reindeer
ZP/- Nostalgia
ZP/- Trove
ZP/- Narcissus
ZP/- Yurt
ZP/- Congee
ZP/- Genepy
ZP/- Herbaceous
ZP/- Paddock
ZP/- Precious
ZP/- Biome
ZP/- Tinted
ZP/- Pelagic
ZP/- Bluebill
ZP/- Chicory
ZP/- Eaglet
ZP/- Permafrost
ZP/- Atlantic
ZP/- Airstream
ZP/- Debonair
Superweave - Maharam
Ancillary
” wide
% polyester
% cotton
Z/- Sienna
Z/- Ochre
Z/- Marine
Z/- Olive
Z/- Orange and
Pink
Prone Leather - Maharam
Ancillary
approx. sq. ft. per hide
% leather
protective top coat
NX/- Lotus
NX/- Timbre
NX/- Essence
NX/- Script
NX/- Gambit
NX/- Obsidian
NX/- Sail
NX/- Vine
NX/- Yarrow
NX/- Balsa
NX/- Shore
NX/- Bricolage
NX/- Ledge
NX/- Mantra
NX/- Java
NX/- Lute
NX/- Glow
NX/- Hickory
Tenera Leather - Geiger Textile
Ancillary
approx. sq. ft. per hide
% leather
Cement
Marzipan
Raw Sienna
Maple
Cranberry
Dark Chocolate
Black
Carbon
Sapphire
HermanMiller August 15
• Maharam textiles are on assigned lead times
A
.
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price Category 11Price Category 10
continued
Appendix: Textile Colors
No fabrics available at this time.
No fabrics available at this time.
Textile Colors
continued
Lanalux - Maharam
Ancillary
” wide
% wool
Z/- Black/White
Z/- Olive/Black
Z/- Natural
Z/- Umber
Z/- Natural/Black
Z/- Orange
Z/- Crimson
Medium – Maharam
Ancillary/Seating/Workspaces
” wide
% polyester
VM/- Raven
VM/- Smoke
VM/- Alloy
VM/- Flax
VM/- Espresso
VM/- Laser
VM/- Port
VM/- Marina
VM/- Pistachio
VM/- Prospect
VM/- Delight
VM/- Nautical
VM/- Pool
VM/- Washed
VM/- Sculpture
VM/- Thatched
VM/- Hike
VM/- Tangle
VM/- Pacific
VM/- Cosmic
VM/- Cascade
VM/- Blackberry
VM/- Nasturtium
Messenger – Maharam
Ancillary/Seating/Workspaces
” wide
% post-industrial recycled polyester
% polyester, % nylon
TI/- Shadow
TI/- Bayou *
TI/- Poppy
TI/- Mao
TI/- Onyx *
TI/- Cloud *
TI/- Depth *
TI/- Nile *
TI/- Azure *
16 August HermanMiller
• Maharam textiles are on assigned lead times
A
.
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price Category A Price Category BPrice Category 12-13 Price Category 14
Price category B continued on
next page
Appendix: Textile Colors
Messenger continued
TI/- Cactus *
TI/- Ice * **
TI/- Neon
TI/- Hydrangea
TI/- Tangelo
TI/- Lumine *
TI/- Snow ** ***
TI/- Peridot
TI/- Capri *
TI/- Ultramarine
TI/- Squall
TI/- Cassis
TI/- Aster
TI/- Cherry
TI/- Vibrant
TI/- Satsuma *
TI/- Maize
TI/- Fossil
TI/- Ash
TI/- Tusk
TI/- Oyster **
TI/- Husk
TI/- Robust
TI/- Beyond
TI/- Voyage *
TI/- Everglade
TI/- Blanch ***
TI/- Longspur
TI/- Vireo
TI/- Dipper
TI/- Gale
TI/- Hunter
TI/- Lime
TI/- Apple
TI/- Krill
TI/- Catalyst
* Colors available on
-day lead time.
** Colors not available on Eames
Molded Fiberglass and Molded
Plastic Side Chairs.
*** Colors not available on Valor
Seating.
Manner continued
Z/- Southwest
Z/- Roseate
Z/- Charisma
Z/- Siltstone
Z/- Kimono
Z/- Valiant
Z/- Baroness
* Color not available on Eames
Aluminum Group, Executive
Chairs, Upholstered Molded
Plywood Chairs, and Sofa
Compact.
Merit - Maharam
Ancillary/Seating
” wide
% post-industrial
recycled polyester
% polyester
PFOA-Free stain resistant
Z/- Trickle
Z/- Beluga
Z/- Gunmetal
Z/- Blackout
Z/- Superior
Z/- Ocean
Z/- Highborn
Z/- Immersed
Z/- Rainfall
Z/- Blizzard
Z/- Poolside
Z/- Steel
Z/- Zircon
Z/- Ripple
Z/- Aegean
Z/- Armada
Z/- Hedera
Z/- Rainforest
Z/- Gator
Z/- Vineyard
Z/- Pine
Z/- Kiwi
Z/- Kookaburra
Textile Colors
continued
Manner - Maharam
Ancillary/Seating/Workspaces
” wide
% post-industrial
recycled polyester
% post-consumer
recycled polyester
Z/- Magic
Z/- Carob
Z/- Porpoise
Z/- Flint
Z/- Hush *
Z/- Nuance
Z/- Ember
Z/- Wagon
Z/- Ablaze
Z/- Peel
Z/- Butterscotch
Z/- Harvest
Z/- Parakeet
Z/- Aquatic
Z/- Cottage
Z/- Dahlia
Z/- Vivid
Z/- Basin
Z/- Schooner
Z/- Slope
Z/- Silverpoint
Z/- Lattice
Z/- Smoky
Z/- Magnetic
Z/- Woad
Z/- Resolute
Z/- Cruise
Z/- Atmospheric
Z/- Cloudburst
Z/- Tidewater
Z/- Firth
Z/- Oceanside
Z/- Grandeur
Z/- Comfort
Z/- Dill
Z/- Poplar
Z/- Citronella
Z/- Passerine
Merit continued
Z/- Bellini
Z/- Sunflower
Z/- Sandstorm
Z/- Mudder
Z/- Lynx
Z/- Farro
Z/- Manila
Z/- Starfish
Z/- Brass
Z/- Arrow
Z/- Gelato
Z/- Nectarine
Z/- Macaron
Z/- Alert
Z/- Goji
Z/- Cabernet
Z/- Eggplant
Z/- Hawk
Z/- Stag
Z/- Overcast
Metric – Maharam
Ancillary/Seating/Workspaces
” wide
% post-industrial
recycled polyester
% polyester
Z/- Fog
Z/- Fleece
Z/- Cardinal
Z/- Lava
Z/- Pollen
Z/- Alligator
Z/- Tar
Z/- Anchor
Z/- Admiral
Z/- Seaport
Z/- Scuba
Z/- Skate
Z/- Hopscotch
Z/- Film
Z/- Whale
Z/- Downpour
Z/- Midday
HermanMiller August 17
• Maharam textiles are on assigned lead times
A
.
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price Category CPrice Category B
continued
Price category C continued on
next page
Appendix: Textile Colors
Metric continued
Z/- Talisman
Z/- Hedgerow
Z/- Snorkel
Z/- Highway
Z/- Canary
Z/- Sunny
Z/- Aztec
Z/- Fruit
Z/- Galah
Z/- Kiln
Z/- Moth
Murmur - Maharam
Ancillary/Seating
” wide
% polyester
PFOA-Free stain resistant
EY/- Gust
EY/- Harmonica
EY/- Canopy
EY/- Dim
EY/- Peppercorn
EY/- Cauldron
EY/- Conquer
EY/- Rapids
EY/- Seawater
EY/- Baby
EY/- Elderberry
EY/- Iceberg
EY/- Tallgrass
EY/- Underground
EY/- Biome
EY/- Cask
EY/- Argan
EY/- Sundown
EY/- Ignite
EY/- Sultry
EY/- Sangria
Mode – Maharam
Ancillary/Seating/Workspaces
” wide
% post-consumer recycled polyester
% polyester
PFOA-Free stain resistant finish
ZMD/- Stroll
ZMD/- Intaglio
ZMD/- Ominous
ZMD/- Machine
ZMD/- Talus
ZMD/- Marsh
ZMD/- Hollow
ZMD/- Sycamore
ZMD/- Clavicle
ZMD/- Billygoat
ZMD/- Spindle
ZMD/- Lemon
ZMD/- Oxeye
ZMD/- Henge
ZMD/- Goldenrod
ZMD/- Cottontail
ZMD/- Lioness
ZMD/- Oriole
ZMD/- Rust
ZMD/- Carotene
ZMD/- Blush
ZMD/- Vermilion
ZMD/- Alder
ZMD/- Kermes
ZMD/- Barberry
ZMD/- Petal
ZMD/- Valley
ZMD/- Odyssey
ZMD/- Ballpoint
ZMD/- Toile
ZMD/- Paradise
Textile Colors
continued
Bluff - Maharam
Ancillary/Seating
” wide
% polyurethane
Ink-resistant protective top coat
Polyester backing
I/- Loom
I/- Helm
I/- Cruller
I/- Folklore
I/- Beguile
I/- Sherpa
I/- Teleport
I/- Annex
I/- Lorimer
I/- Cinema
I/- Zip
I/- Coach
I/- Supernova
I/- Pirate
I/- Academy
I/- Disco
I/- Equator
I/- Brink
I/- Scene
I/- Petrichor
I/- Exotic
I/- Fauna
I/- Calabash
I/- Fuscous
I/- Wildling
I/- Blitz
I/- Allspice
I/- Lumos
I/- Pilot
I/- Jukebox
I/- Dugout
I/- Claret
I/- Flamenco
Mode continued
ZMD/- Angelfish
ZMD/- Denim
ZMD/- Crush
ZMD/- Jetty
ZMD/- Saltwater
ZMD/- Mallard
ZMD/- Celtic
ZMD/- Eucalyptus
ZMD/- Bonsai
ZMD/- Sassafras
ZMD/- Yucca
ZMD/- Lichen
Spiral - Maharam
Workspaces
” wide
% polyester
ZS/- Chalk
ZS/- Wheat
ZS/- Mica
ZS/- Pavement
ZS/- Graphite
18 August HermanMiller
• Maharam textiles are on assigned lead times
A
.
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price Category DPrice Category C
continued
Appendix: Textile Colors
Article – Maharam
Ancillary/Seating
” wide
% vinyl
ZAT/- Marina
ZAT/- Flume
ZAT/- Storm
ZAT/- Toast
ZAT/- Fleece
ZAT/- Stone
ZAT/- Mercury
ZAT/- Bluegrass
ZAT/- Truffle
ZAT/- Gravel
ZAT/- Value
ZAT/- Tint
ZAT/- Snowflake
ZAT/- Chalice
ZAT/- Trail
ZAT/- Pyramid
ZAT/- Desert
ZAT/- Lei
ZAT/- Rouge
ZAT/- Karma
ZAT/- Opal
ZAT/- Periwinkle
ZAT/- Vampire
ZAT/- Surf
ZAT/- Plumage
Parallel — Maharam
Workspaces
” wide
% recycled polyester
TT/- Fog
TT22/901180-022 Sterling
TT23/901180-023 Linen
TT24/901180-024 Pea
TT27/901180-027 Boulder
TT28/901180-028 Stream
TT29/901180-029 Shiitake
TT32/901180-032 Brandy
TT33/901180-033 Crater
TT36/901180-036 Quail
Textile Colors
continued
Flock - Maharam
Workspaces
” wide
% polyester
ZF/- Calm
ZF/- Course
ZF/- Highlight
ZF/- Poppy
ZF/- Briefcase
ZF/- Monkstrap
ZF/- Quag
ZF/- Pistachio
ZF/- Froth
ZF/- Celadon
ZF/- Highsea
ZF/- China
ZF/- Victorian
ZF/- Commander
ZF/- Raven
ZF/- Aluminum
Micro – Maharam
Ancillary
” wide
% vinyl
ZMB/- Muslin
ZMB/- Basalt
ZMB/- Phantom
ZMB/- Depth
ZMB/- Cottage
ZMB/- Hunter
ZMB/- Tomatillo
ZMB/- Brew
ZMB/- Tang
ZMB/- Risk
Apt – Maharam
Ancillary/Seating
” wide
% polyurethane/silicone
Ink-resistant protective top coat
Polyester backing
T/- Iris
T/- Nocturnal
T/- Fluid
T/- Eden
T/- Galactic
T/- Shoreline
T/- Jade
T/- Garden
T/- Botanic
T/- Chartreuse
T/- Lyric
T/- Turmeric
T/- Bengal
T/- Core
T/- Mantle
T/- Sorbet
T/- Oak
T/- Castle
T/- Follow
T/- Elixir
T/- Charm
T/- Descend
T/- Sketch
T/- Glacier
T/- Fortress
T/- Lotus
T/- Coconut
T/- Cobblestone
T/- Bloom
T/- Crepe
T/- Hickory
T/- Constellation
T/- Labyrinth
T/- Vibe
T/- Stampede
T/- Lumber
T/- Gingerbread
HermanMiller August 19
• Maharam textiles are on assigned lead times
A
.
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price category F continued on
next page
Price Category E Price Category F
Price Category F
continued
Appendix: Textile Colors
Brindle - Maharam
Ancillary/Seating
” wide
% polyester
PFOA-free stain resistant
Acrylic backing
/- Calico
/- Mauve
/- Torch
/- Burnt
/- Barn
/- Pharaoh
/- Sandbur
/- Jungle
/- Inland
/- Seagrass
/- Watercolor
/- Aquarium
/- Drill
Chime - Maharam
Ancillary
” wide
% vinyl
VM/- Morel
VMB/- Tranquil
VMJ/- Slate
VMV/- Verve
VMW/- Understory
Instill – Maharam
Ancillary/Seating
” wide
% polyurethane
Ink-resistant protective top coat
Polyester backing
M/- Page
M/- Limestone
M/- Bobwhite
M/- Loafer
M/- Shaker
M/- Doe
M/- Ride
M/- Squire
M/- Tannin
M/- Vitis
M/- Quail
M/- Brittanic
M/- Narwhal
M/- Stowaway
M/- Koala
M/- Dorsal
M/- Stealth
M/- Mosey
M/- Beachfront
M/- Discovery
M/- Grasp
M/- Arboreous
M/- Yearling
M/- Allele
M/- Eager
M/- Rise
M/- Latte
M/- Compose
M/- Furrow
M/- Tenor
M/- Annatto
M/- Together
M/- Intention
M/- Overnight
M/- Icecap
M/- Metamorphic
M/- Anthracite
Textile Colors
continued
Conduit - Maharam
Ancillary/Seating
” wide
% polyester
PFOA-free stain resistant
Acrylic backing
Z/- Space
Z/- Syrup
Z/- Nimbus
Z/- Greystone
Z/- Fawn
Z/- Ghost
Z/- Caribbean
Z/- Canal
Z/- Bonfire
Emit – Maharam
Workspaces
” wide
% post-industrial
recycled polyester
% post-consumer
recycled polyester
PFOA-free stain resistant
EX/- Wed
EX/- Zebra
EX/- Chiffon
EX/- Nectar
EX/- Elk
EX/- Goldenrod
EX/- Beached
EX/- Samba
EX/- Nest
EX/- Groove
EX/- Haiku
EX/- Bluefin
EX/- Flow
EX/- Xenon
EX/- Artem
EX/- Zen
EX/- Limeade
Keen - Maharam
Ancillary/Seating
” wide
% polyester
% polyolefin
PFOA-Free stain resistant
Acrylic backing
N/- Gaur
N/- Lock
N/- Elk
N/- Oatmeal
N/- Lakefront
N/- Argent
N/- Coyote
N/- Eventide
N/- Canal
N/- Rosemary
N/- Herb
N/- Ruby
N/- Loganberry
Ledger – Maharam
Ancillary/Seating
” wide
% polyurethane
VG/-
VG/-
VG/-
VG/-
VGG/-
VGQ/-
VGS/-
VGU/-
VGV/-
VGW/-
VGX/-
VGY/-
VG/-
VG/-
VG/-
VG/-
VG/-
20 August HermanMiller
• Maharam textiles are on assigned lead times
A
.
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price category F continued on
next page
Appendix: Textile Colors
Loop - Maharam
Ancillary/Seating
” wide
% post-industrial
recycled polyester
% polyester
% post-consumer
recycled polyester
PFOA-Free stain resistant
Acrylic Backing
ZLL/- Opossum
ZLL/- Foundation
ZLL/- Naval
ZLL/- Buoyant
ZLL/- Mockingbird
ZLL/- Dynasty
ZLL/- Zori
ZLL/- Wildfire
ZLL/- Floral
ZLL/- Penguin
Multiply - Maharam
Ancillary/Seating
” wide
% post-consumer
recycled polyester
% post-industrial
recycled polyester
PFOA-Free stain resistant
Acrylic Backing
A/- Winter
A/- Encore
A/- Swing
A/- Contrast
A/- Sterling
A/- Daze
A/- Sway
A/- Sailor
A/- Mystique
A/- Deep
A/- Craft
A/- Town
A/- Limit
A/- Tamale
Scuba - Maharam
Ancillary
” wide
% polyurethane
VB/- Vanilla
VB/- Chinchilla
VB/- Mahogany
VB/- Jet
VB/- Charcoal
VB/- Dolphin
VBA/- Drizzle
VBC/- Conifer
VBD/- Bottle
VBF/- Tourmaline
VBG/- Sapphire
VBH/- Electric
VBL/- Cabernet
VBM/- Brick
VBN/- Coral
VBP/- Autumn
Strum - Maharam
Ancillary/Seating
” wide
% polyurethane with
silane-based antimicrobial
Z/- Overcast
Z/- Ridge
Z/- Pigeon
Z/- Bur
Z/- Abalone
Z/- Lemongrass
Textile Colors
continued
Pitch - Maharam
Ancillary
” wide
% vinyl
ZPC/- Pollen
ZPC/- Apple
ZPC/- Voyage
ZPC/- Turquoise
ZPC/- Inlet
ZPC/- Captain
ZPC/- Aura
ZPC/- Coastal
ZPC/- Fog
ZPC/- Coal
ZPC/- Mulberry
ZPC/- Flame
ZPC/- Tumbleweed
ZPC/- Subtle
ZPC/- Buff
Pepper - Maharam
Ancillary/Seating
” wide
% polyester
% post-industrial
recycled polyester
% post-consumer
recycled polyester
PFOA-Free stain resistant
Acrylic Backing
LW/- Dojo
LW/- Marengo
LW/- Harlequin
LW/- Pavlova
LW/- Achiote
LW/- Essence
LW/- Genome
LW/- Myriad
LW/- Terrarium
Compound - Maharam
Ancillary/Seating
” wide
% polyurethane with
silane-based antimicrobial
ZC/- Quartz
ZC/- Weathered
ZC/- Cliff
ZC/- Espresso
ZC/- Smolder
ZC/- Blaze
ZC/- Mandarin
ZC/- Maple
ZC/- Perennial
ZC/- Mountainside
ZC/- Tundra
ZC/- Manatee
ZC/- Marine
ZC/- Twilight
ZC/- Shelter
ZC/- Vessel
ZC/- Smoke
ZC/- Fog
Fluent Crypton - Maharam
Ancillary
” wide
% polyester
% post-industrial
recycled polyester
% post-consumer
recycled polyester
ZFC/- Lynx
ZFC/- Bayou
ZFC/- Bottle
ZFC/- Cadet
ZFC/- Turf
ZFC/- Steady
HermanMiller August 21
• Maharam textiles are on assigned lead times
A
.
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price Category G
Price category G continued on
next page
Price Category F
continued
Appendix: Textile Colors
Fold - Maharam
Seating
” wide
% polyurethane
Polyester backing
ZF/- Jet
ZF/- Chalk
ZF/- Smoke
ZF/- Fatigue
ZF/- Splash
ZF/- Apple
ZF/- Moss
ZF/- Midnight
Gild - Maharam
Ancillary/Seating
” wide
% non-phthalate vinyl
Ink-resistant protective top coat
Polyester backing
AR/- Grapevine
AR/- Frosting
AR/- Smokey
AR/- Skylight
AR/- Sandstone
AR/- Hurricane
AR/- Wreath
AR/- Rainforest
AR/- Fudge
AR/- Lantern
AR/- Planet
AR/- Reflection
Sudden – Maharam
Ancillary
” wide
% polyurethane
ZSD/-
ZSD/-
ZSD/-
ZSD/-
ZSD/-
ZSD/-
ZSD/-
ZSD/-
ZSD/-
ZSD/-
ZSD/-
ZSD/-
ZSD/-
ZSD/-
ZSD/-
ZSD/-
ZSD/-
ZSD/-
ZSD/-
Textile Colors
continued
Pare – Maharam
Ancillary/Seating
” wide
% wool
% polyester
% nylon
PFOA-free stain resistant finish
ZPR/- Polaris
ZPR/- Fresco
ZPR/- Wink
ZPR/- Concord
ZPR/- Strawberry
ZPR/- Solar
ZPR/- Amulet
ZPR/- Zest
ZPR/- Elmwood
ZPR/- Thyme
ZPR/- Blueberry
Runner - Maharam
Ancillary/Seating
” wide
% post-industrial
recycled polyester
% post-consumer
recycled polyester
ZRF/- Bluff
ZRF/- Grove
ZRF/- Starboard
ZRF/- Plot
ZRF/- Carousel
Anagram - Maharam
Ancillary
” wide
% cotton
% polyester
% nylon
ZAN/- Quarry
ZAN/- Hush
ZAN/- Electric
ZAN/- Range
ZAN/- Settle
Circles — Maharam
Ancillary/Seating
” wide
% cotton
% polyester
ZT/- Khaki
ZT/- Fatigue
ZT/- Document
ZT/- Engine
Dot Pattern — Maharam
Ancillary/Seating
” wide
% cotton
% polyester
ZK/- Document
ZK/- Taupe
ZK/- Red
ZK/- Navy
Mechanism – Maharam
Ancillary
” wide
% polyester
ZMC/- Mercury
ZMC/- Pearl
ZMC/- Bronze
ZMC/- Titanium
ZMC/- Tangerine
ZMC/- Sprout
22 August HermanMiller
• Maharam textiles are on assigned lead times
A
.
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price Category G
continued
Price Category H
Price category H continued on
next page
Appendix: Textile Colors
Mister – Maharam
Ancillary
” wide
% solution-dyed acrylic
% solution-dyed polyester
ZMG/- Breeze
ZMG/- Enliven
ZMG/- Notice
ZMG/- Azurite
Regatta – Maharam
Ancillary
” wide
% solution-dyed acrylic
% solution-dyed polyester
ZRT/- Drift
ZRT/- Parasol
ZRT/- Swell
Small Dot Pattern — Maharam
Ancillary/Seating
” wide
% cotton
% polyester
ZL/- Document
ZL/- Sand
ZL/- Khaki
ZL/- Taupe
ZL/- Charcoal
ZL/- Document
Reverse
ZL/- Red
ZL/- Yellow
ZL/- Green
Study - Maharam
Ancillary/Seating
” wide
% solution-dyed acrylic
% solution-dyed polyester
ZSY/-
ZSY/-
ZSY/-
ZSY/-
ZSY/-
Tracery – Maharam
Ancillary
” wide
% solution-dyed nylon
% wool
% polyester
% cotton
acrylic backing
PFOA-free stain resistant finish
ZT/- Birch
ZT/- Sterling
ZT/- Flint
ZT/- Indigo
ZT/- Arctic
ZT/- Kelp
ZT/- Melon
ZT/- Poppy
ZT/- Copper
ZT/- Papaya
ZT/- Sepia
Textile Colors
continued
Colorwheel – Maharam
Ancillary
” wide
% cotton
% solution-dyed
post-industrial recycled nylon
ZCW/- Pumice
ZCW/- Viridian
ZCW/- Charcoal
ZCW/- Carbon
Cursive – Maharam
Ancillary/Seating
” wide
% solution-dyed acrylic
% solution-dyed polyester
PFOA-Free stain resistant
CW/- Fast
CW/- Beachcomb
CW/- Swift
CW/- Inkwell
CW/- Rubber
Passage - Maharam
Ancillary
” wide
% polyester
P/- Mirage
P/- Poolside
P/- Cascade
P/- Lacinato
P/- Overstory
P/- Celadon
P/- Echo
P/- Bentonite
P/- Buttercup
P/- Maple
P/- Blossom
P/- Cloudberry
P/- Contessa
P/- Claret
P/- Katana
Fluted Silk – Maharam
Ancillary
” wide
% silk
% cotton
% acrylic
ZFK/- Tarnish
ZFK/- Calm
ZFK/- Flaxen
ZFK/- Noticed
ZFK/- Moody
ZFK/- Constant
ZFK/- Seed
ZFK/- Eternal
ZFK/- Honor
ZFK/- Cranach
ZFK/- Discreet
Mikado – Maharam
Ancillary
” wide
% cotton
% polyester
V/- Umber
V/- Orange
V/- Ultramarine
V/- Pink
V/- Sepia
HermanMiller August 23
• Maharam textiles are on assigned lead times
A
.
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price Category I Price Category JPrice Category H
continued
Price category J continued on
next page
Appendix: Textile Colors
Trestle - Maharam
Ancillary
” wide
% acrylic
% wool
% cotton
% polyester
WG/- Loam
WG/- Rift
WG/- Fuse
WG/- Cumulus
WG/- Strand
WG/- Pomelo
WG/- Tawny
WG/- Sunstone
WG/- Kindling
WG/- Sidecar
WG/- Beak
WG/- Ficus
WG/- Hinge
WG/- Bluefish
WG/- Oblivion
Isa – Maharam
Ancillary
” wide
% wool
% nylon
VKZ/- Bashful
VKZ/- Median
VKZ/- Observe
VKZ/- Plains
VKZ/- Drawn
VKZ/- Connect
VKZ/- Fennel
VKZ/- Skyward
VKZ/- Oceanic
VKZ/- Neptune
VKZ/- Sprint
VKZ/- Ledge
VKZ/- Surround
VKZ/- Foretell
VKZ/- Lory
VKZ/- Dear
VKZ/- Foxtrot
VKZ/- Sincere
VKZ/- Begonia
Optik – Maharam
Ancillary
” wide
% cotton
% polyester
ZQP/- Sun Yellow/
Orange
ZQP/- White/Black
Unisol – Maharam
Ancillary
” wide
% rayon
% polyester
% cotton
ZUN/- Black/
White
Textile Colors
continued
Checker – Maharam
Ancillary
” wide
% cotton
% polyester
V/- Emerald Light/
Ivory
V/- Ultramarine/
Emerald
V/- Sienna Dark/
Khaki
V/- Black/White
V/- Ultramarine/
Turquoise
V/- Blue Gray/
Emerald
V/- Olive/Pink
V/- Magenta/
Orange
V/- Crimson/
Orange
Checker Split – Maharam
Ancillary
” wide
% cotton
% polyester
V/- Black/White
Double Triangles – Maharam
Ancillary
” wide
% cotton
% polyester
V/- Black/White
Facets – Maharam
Ancillary
” wide
% cotton
% polyester
V/- Black/White
Exaggerated Plaid – Maharam
Ancillary
” wide
% wool
ZEP/- Glen
ZEP/- Brae
ZEP/- Firth
Geometri – Maharam
Ancillary
” wide
% cotton
% polyester
ZGM/- Red/
Carmine
ZGM/- Lilac/Blue
ZGM/- White/
Black
Jacobs Coat – Maharam
Ancillary
” wide
% wool
% nylon
V/- Multicolored
Bright *
V/- Multicolored
Neutral
* Color available on Girard Color
Wheel Ottoman.
Millerstripe – Maharam
Ancillary
” wide
% wool
% rayon
V/- Multicolored
Bright
V/- Multicolored
Neutral
24 August HermanMiller
• Maharam textiles are on assigned lead times
A
.
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price Category K Price Category L
Price category L continued on
next page
Price Category J
continued
Appendix: Textile Colors
Minicheck - Maharam
Seating
” wide
% cotton
% polyester
PFOA-Free stain resistant finish
ZMK/- Black/
White
Monk’s Wool – Maharam
Ancillary
” wide
% wool
% nylon
ZMW/- Tusk
ZMW/- Slate
ZMW/- Cherokee
Pebble Wool – Maharam
Ancillary
” wide
% wool
% nylon
ZPW/- Birch
ZPW/- Cottage
ZPW/- Eggshell
ZPW/- Whisper
ZPW/- Ceramic
ZPW/- Seamist
ZPW/- Armory
ZPW/- Glaze
ZPW/- Cordial
Pebble Wool Multi – Maharam
Ancillary
” wide
% wool
% nylon
ZPM/- Fawn
ZPM/- Slate
ZPM/- Moss
ZPM/- Tabasco
Stripes - Maharam
Ancillary
” wide
% wool
% nylon
ZSP/-
ZSP/-
ZSP/-
ZSP/-
ZSP/-
ZSP/-
ZSP/-
ZSP/-
ZSP/-
ZSP/-
Toostripe – Maharam
Ancillary
” wide
% wool
% nylon
V/- Orange Dark/
Crimson Dark
V/- Black/
Raw Umber
V/- Ochre Dark/
Sienna
Textile Colors
continued
Quatrefoil – Maharam
Ancillary
” wide
% cotton
% nylon
V/- Silver
V/- Pink
V/- Crimson
V/- Emerald
V/- Violet
Repeat Classic Stripe –
Maharam
Ancillary
” wide
% cotton
% rayon
% polyester
ZRS/- Inca
ZRS/- Pistachio
ZRS/- Poppy
ZRS/- Cadet
ZRS/- Peacock
Repeat Dot Ring – Maharam
Ancillary
” wide
% cotton
% polyester
ZRR/- Gold
ZRR/- Pink
ZRR/- Coral
ZRR/- Gold
Reverse
ZRR/- Pink
Reverse
ZRR/- Coral
Reverse
Fruit - Maharam
Seating
” wide
% cotton
% nylon
% post-consumer recycled
polyester
PFOA-Free stain resistant finish
Acrylic backing
ZF/- Opal
ZF/- Lime
ZF/- Olive
ZF/- Sky
ZF/- Russet
Names – Maharam
Ancillary
” wide
% cotton
% polyester
V/- Crimson On
White
V/- Ultramarine
On White
V/- Black On
White
HermanMiller August 25
• Maharam textiles are on assigned lead times
A
.
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price Category L
continued
Price Category M
Price category M continued on
next page
Appendix: Textile Colors
Ottoman Stripe – Maharam
Ancillary
” wide
% wool
% nylon
ZQN/- Brass
ZQN/- Cocoa
ZQN/- Dusk
ZQN/- Pistachio
ZQN/- Apricot
Pressed Plaid – Maharam
Ancillary
” wide
% wool
T/-
T/-
T/-
T/-
T/-
T/-
Wool Striae – Maharam
Ancillary
” wide
% wool
T/-
T/-
T/-
T/-
T/-
T/-
T/-
Point – Maharam
Ancillary
” wide
% rayon
% nylon
ZPT/- Ivory and
Ember
ZPT/- Black and
Coral
ZPT/- Slate and
Khaki
ZPT/- Black and
Cobalt
ZPT/- Black and
Khaki
ZPT/- Slate and
Mandarin
ZPT/- Slate and
Black
ZPT/- Brick and
Greige
ZPT/- Gold and
Black
ZPT/- Greige and
Peat
ZPT/- Peat and
Mandarin
ZPT/- Crimson
ZPT/- Mandarin
ZPT/- Citrus
ZPT/- Grass
ZPT/- Cyan
ZPT/- Cobalt
Wool Velvet - Maharam
Ancillary
” wide
% wool
ZWV/- Plush
ZWV/- Subdue
ZWV/- Flagstone
ZWV/- Nori
ZWV/- Bridle
ZWV/- Covert
ZWV/- Gateway
Textile Colors
continued
Alpaca Epinglé - Maharam
Ancillary
” wide
% alpaca
ZAE/- Vellum
ZAE/- Slate
ZAE/- Graphite
ZAE/- Beignet
Alpaca Velvet - Maharam
Ancillary
” wide
% alpaca
ZAV/- Alpine
ZAV/- Charcoal
ZAV/- Pewter
ZAV/- Squash
ZAV/- Wallaby
ZAV/- Brunia
Bespoke Stripe - Maharam
Ancillary
” wide
% wool
ZBP/- Navy
ZBP/- Tobacco
ZBP/- Chocolate
ZBP/- Charcoal
ZBP/- Black
ZBP/- Pewter
Herringbone Stripe - Maharam
Ancillary
” wide
% wool
ZKP/- Granite
ZKP/- Espresso
ZKP/- Graphite
ZKP/- Indigo
ZKP/- Raven
Bavaria Stripe – Maharam
Ancillary
” wide
% polyester
% cotton
ZBS/- Unique
26 August HermanMiller
• Maharam textiles are on assigned lead times.
A
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price Category N Price Category OPrice Category M
continued
Appendix: Textile Colors
Big Stripe – Maharam
Ancillary
” wide
% wool
% nylon
ZBR/- Peacock
ZBR/- Spring
ZBR/- Umber
ZBR/- Poppy
ZBR/- Cobalt
Epinglé Stripe - Maharam
Ancillary
” wide
% cotton
ZES/- Caramel
ZES/- Lead
ZES/- Violet
ZES/- Mahogany
ZES/- Olive
Layers Garden – Maharam
Ancillary
” wide
% wool
% nylon
% polyester
ZLY/- Ivy/Bronze
ZLY/- Putty/
Turquoise
ZLY/- Pewter/
White
ZLY/- Chocolate/
Lilac
ZLY/- Peat/Copper
Mohair Supreme - Maharam
Ancillary
” wide
% mohair
ZMS/- Stonehenge
ZMS/- Slate *
ZMS/- Rich
Chocolate *
ZMS/- Cayenne
ZMS/- Cognac
ZMS/- Peat *
ZMS/- Abyss
ZMS/- Intrigue
ZMS/- Lupine *
ZMS/- League
ZMS/- Armory *
ZMS/- Capiz
ZMS/- Underneath
ZMS/- Crescent
ZMS/- National
ZMS/- Rooftop
ZMS/- Skewer
ZMS/- Party
ZMS/- Keepsake
ZMS/- Travel
ZMS/- Estate
ZMS/- Grassland
ZMS/- Limoncello
ZMS/- Mango
ZMS/- Doll
ZMS/- Carousel
ZMS/- Palette
ZMS/- Brandy
ZMS/- Aristocrat
ZMS/- Soulmate
ZMS/- Rosette
ZMS/- Aviator
ZMS/- Penny
* Colors available on Eames
Lounge Chair and Ottoman.
Textile Colors
continued
Layers Park – Maharam
Ancillary
” wide
% wool
% nylon
% polyester
ZLP/- Ash/Snow
ZLP/- Mineral/Sky
ZLP/- Poppy/
Melon
ZLP/- Indigo/
White
ZLP/- Earth/Cobalt
Layers Vineyard Large –
Maharam
Ancillary
” wide
% wool
% nylon
% polyester
ZLV/- Ivory/Onyx
ZLV/- Slate/Azure
ZLV/- Loden/Sky
ZLV/- Taupe/
Crimson
ZLV/- Black/
Mahogany
Layers Vineyard Small –
Maharam
Ancillary
” wide
% wool
% polyester
% nylon
ZLS/- Ochre/White
ZLS/- Scarlet/
Peony
ZLS/- Taupe/Violet
ZLS/- Jade/
Turquoise
ZLS/- Ginger/Rose
A Band Apart – Maharam
Ancillary
” wide
% polyester
% cotton
ZAB/- Unique
Brushed Camel – Maharam
Ancillary
” wide
% baby camel hair
ZBA/- Albino
ZBA/- Natural
Deconstructed Rose – Maharam
Ancillary
” wide
% polyester
% cotton
% rayon
ZDS/- Golden
ZDS/- Vivid
ZDS/- Earthen
Massive Paisley – Maharam
Ancillary
” wide
% polyester
% cotton
ZMV/- Ash
ZMV/- Cardinal
ZMV/- Night
The Firm – Maharam
Ancillary
” wide
% polyester
% cotton
ZTF/- Unique
HermanMiller August 27
Price Category P Price Category Q
• Maharam textiles are on assigned lead times.
A
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Appendix: Textile Colors
Borders – Maharam
Ancillary
” wide
% wool
% polyester
ZBB/- Natural
ZBB/- Greige
ZBB/- Charcoal
ZBB/- Walnut
Stow Leather - Maharam
Ancillary
approx. sq. ft. per hide
% leather
protective top coat
ZSV/- Opera
ZSV/- Japonica
ZSV/- Masquerade
ZSV/- Laguna
ZSV/- Jettison
ZSV/- Razor
ZSV/- Holiday
ZSV/- Patchouli
ZSV/- Macrame
ZSV/- Grace
ZSV/- Seraphim
ZSV/- Ricotta
ZSV/- Neroli
ZSV/- Sultana
ZSV/- Sundance
ZSV/- Quince
ZSV/- Babka
ZSV/- Maitake
ZSV/- Mercer
ZSV/- Gaucho
ZSV/- Chia
ZSV/- Vanguard
ZSV/- Zone
ZSV/- Zeppelin
Bavaria – Maharam
Ancillary
” wide
% polyester
% cotton
ZBV/- Unique
Textile Colors
continued
Stow Leather continued
ZSV/- Clandestine
ZSV/- Raven
ZSV/- Cabana
ZSV/- Rime
ZSV/- Forsythia
ZSV/- Panthera
ZSV/- Dune
ZSV/- Madera
ZSV/- Russet
ZSV/- Gala
ZSV/- Heron
All Grain Leather – Edelman
Ancillary
approx. sq. ft. per hide
% full-grain Aniline-dye cowhide
VB/AG Pitch Brown
VB/AG White
VB/AG Cloud
VB/AG Shadow
VB/AG Black
VB/AG Baked Bean
VB/AG Mildew
VB/AG Soot
VB/AG Blue Jeans
VB/AG Merlot
VB/AG Nutmeg
VB/AG Butter
VB/AG Cherry
VB/AG Burnt Orange
VB/AG Whiskey
VB/AG Raw Silk
VB/AG Balsa
VB/AG Naturale
VB/AG Greige
VB/AG Latte
VB/AG Coral
VB/AG Rose
VB/AG Zinnia
VB/AG Iris
VB/AG Daffodil
Hours – Maharam
Ancillary
” wide
% wool
% nylon
% rayon
ZKR/- Day
ZKR/- Night
28 August HermanMiller
• Maharam textiles are on assigned lead times.
A
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price Category SPrice Category R Price Category T
Price Category U
Appendix: Textile Colors
Layers Garden Double –
Maharam
Ancillary
” wide
% wool
% nylon
% polyester
ZLD/- Ash/
Quartz/
Grass
ZLD/- Earth/
Chocolate/
Coral
ZLD/- Black/
Navy/
Cobalt
Layers Park Double – Maharam
Ancillary
” wide
% wool
% nylon
% polyester
ZLB/- Mineral/
Taupe/
Lemon
ZLB/- Sienna/
Ginger/
Rose
ZLB/- Black/
Peat/
Copper
Eden – Maharam
Ancillary
” wide
% polyester
% cotton
ZED/-
ZED/-
ZED/-
ZED/-
ZED/-
Foliage – Maharam
Ancillary
” wide
% polyester
% cotton
ZFG/-
ZFG/-
ZFG/-
Textile Colors
continued
No fabrics available at this time. Industry – Maharam
Ancillary
” wide
% polyester
% cotton
ZND/-
HermanMiller August 29
Price Category V-W Price Category X Price Category Y
• Maharam textiles are on assigned lead times.
A
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Appendix: Textile Colors
Agency – Maharam
Ancillary
” wide
% polyester
% cotton
ZAG/-
ZAG/-
ZAG/-
ZAG/-
ZAG/-
ZAG/-
Textile Colors
continued
Pace Leather – Maharam
Ancillary
approx. sq. ft. per hide
% leather
ZPA/- Whisper
ZPA/- Shy
ZPA/- Granite
ZPA/- Misty
ZPA/- Studio
ZPA/- Throne
ZPA/- Proper
ZPA/- Huron
ZPA/- Darkroom
ZPA/- Bark
ZPA/- Raspberry
ZPA/- Sangria
ZPA/- Admiral
ZPA/- Juniper
ZPA/- Regal
ZPA/- Vapor
ZPA/- Valley
ZPA/- Bushel
ZPA/- Heirloom
ZPA/- Palomino
ZPA/- Bamboo
ZPA/- Saffron
ZPA/- Tearose
ZPA/- Canyon
ZPA/- Bistro
ZPA/- Toffee
ZPA/- Rodeo
ZPA/- Mudslide
ZPA/- Greige
ZPA/- Reflection
ZPA/- Pure
ZPA/- Desert
ZPA/- Griffin
ZPA/- Urbane
ZPA/- Woodrose
30 August HermanMiller
• Maharam textiles are on assigned lead times.
A
• Fabric numbers are listed as Herman Miller fabric number/Maharam fabric number.
Price Category 10MPrice Category Z
For more information about our products and services or to see a list of dealers,
please visit us at HermanMiller.com or call (800) 851 1196.
© 2024 Herman Miller, Inc., Zeeland, Michigan
Distribution Rights
Working together since 1956, Herman Miller and Vitra are the authentic sources
of designs by Charles and Ray Eames, Alexander Girard, and George Nelson. All
the designs shown in this book are protected by law. Herman Miller has obtained
all rights to make and sell these designs. Also, Herman Miller holds exclusive
worldwide manufacturing and distribution rights for these products with the fol-
lowing exceptions:
Charles and Ray Eames, George Nelson, and Alexander Girard—Worldwide dis-
tribution rights for furniture in all areas except Europe and the Middle East. For
those areas, please contact Vitra.
Isamu Noguchi—Worldwide distribution rights for the Noguchi Rudder Table.
Distribution rights for the Noguchi Table in North America and Central America
only. For all other areas, please contact Vitra.
Magis—Exclusive distribution rights in the US and Canada. For all other areas,
please contact Magis.
®
Z, Y, 3D Intelligent, 8Z Pellicle, AO, Action Office, Aeron, Aside,
Bubble Lamps, Canvas Office Landscape, Caper, Celle, Cosm, Co/Struc, Daisyone,
Distil, Eames, Eco-Dematerialized, Embody, Envelop, Ethospace, Exclave, Fine-
Tune, FlexFront, Flo, Formcoat, Formwork, Ground Cloth, Intent, Kinemat, Layout
Studio, Lino, Live Unframed, Living Office, Maharam, Meridian, Mirra, Motia,
Nelson, Pari, Pellicle, Perspectives, Plex, PostureFit, PostureFit SL, Public Office
Landscape, Sayl, Setu, Striad, Tu, Ubi, Verus, Wishbone, Y-Tower and Zeph are
among the registered trademarks of Herman Miller, Inc., and its owned subsid-
iaries.
™
About Face, AireWeave, Airia, Ambit, Asari Chair by HermanMiller, Backfit,
Bubbletack, Burdick Group, Butterfly Back, Canvas Vista, Cellular Suspension,
Commend, Compass, Connect, DOT, Duracare, Durawrap, EnhancedAccess,
Everywhere, Flex-Edge, Flute, Harmonic, Headway, Herman Miller Select, Hopsak
2, Iota, Keyless Entry, Latitude, Logic Mini, Logic Power Access Solutions, Lyris,
Lyris 2, Made-to-Measure Storage, Mora, Multiscrim, Nevi, OE1, OE1 Workspace
Collection, Overlay, Pixelated Support, Pronta, Renew, Sense, Soft Pad,
Stackable, Stackable Storage, Swoop, Thrive, Tone, TriFlex, Twist and Wireframe
are among the trademarks of Herman Miller, Inc., and its owned subsidiaries.
SM
Herman Miller Options is among the service marks of Herman Miller, Inc.
AAP
™
is a trademark of Extron Electronics.
Alexander Girard
®
is a registered trademark of The Alexander Girard Estate.
Chemsurf
®
is a registered trademark of Wilsonart International.
Corian
®
is a registered trademark of E. I. du Pont de Nemours and Company
Corporation.
Crypton
®
is a registered trademark of Crypton, Inc.
DACRON
®
is a registered trademark of INVISTA S.a r.l.
Danzer
®
is a registered trademark of Danzer Holding AG.
Decora
®
is a registered trademark of Leviton Manufacturing Co., Inc.
Edelman
®
Leather is a registered trademark of Edelman Leather, Inc.
Extron
®
is a registered trademark of RGB Systems, Inc.
FENIX NTM
®
is a registered trademark of Arpa Industriale S.p.A.
FLEXNET
™
is a trademark of Milliken & Company.
Floor Saver Glide
®
is a registered trademark of Carpin Manufacturing, Inc.
Forest Stewardship Council
®
is a registered trademark of the Forest Stewardship
Council A.C. (FSC). We are FSC
®
certified (FSC
®
C102895).
FSC
®
is a registered trademark of the Forest Stewardship Council A.C. (FSC).
Geiger
®
is a registered trademark, and Bumper
™
, Saiba
™
, and Ward Bennett
™
are
trademarks, of Geiger International.
Hang-It-All
®
is a registered trademark of Lucia Eames Demetrios, d.b.a. Eames
Office.
Holophane
®
is a registered trademark of Holophane.
Ingeo
™
is a trademark of Cargill Dow LLC.
iPad
®
and Mac mini
®
are registered trademarks of Apple Inc.
Leviton
®
is a registered trademark of Leviton Manufacturing Co., Inc.
LifeSize
®
is a registered trademark of LifeSize Communications, Inc.
Logitech G
®
is a registered trademark of Logitech International S.A.
Magis
®
, Bombo
®
, and Me Too
®
are registered trademarks of Magis S.p.A.
MicrobeCare
™
is a trademark of Parasol Medical LLC.
Microsoft
®
and Natural
®
Keyboard are registered trademarks of Microsoft
Corporation.
Noguchi
®
and the Noguchi table configuration (trade dress) are registered trade-
marks, and Rudder Table
™
is a trademark, of The Isamu Noguchi Foundation and
Garden Museum.
Place Textiles
®
is a registered trademark of Place Textiles.
Sunbrella
®
is a registered trademark of Glen Raven, Inc.
SuperSeat
™
is a trademark of Dahti Seating, a division of ITW.
Valor
™
is among the trademarks owned by Nemschoff, Inc.
