Introduction
Thank you and congratulations on your TORAIZ SP-16 purchase.
This document is a guide for customers to update or restore the factory demo projects and/or sample packs provided by
Loopmasters (loopmasters.com). This document will guide you through the process of re-installing and repairing the
necessary files.
Decompressing the Downloaded File
Decompress the file and the following folders will appear.
TORAIZ SP-16 Factory Samples.zip: LOOPMASTERS SAMPLE PACK
TORAIZ SP-16 Factory Projects.zip: TORAIZ SP-16 Factory Projects
Connecting to a Computer
Connect the unit to a computer with a USB cable. Open the UTILITY menu and enable USB MASS STORAGE MODE. You
will be able to access the internal flash memory from your computer.
・ When disconnecting, follow the instructions on the popup and safely remove the device from your computer.
・ DO NOT disconnect the unit while it is connected with the computer. It may lose internal utility data or corrupt
data.
Installing the Factory Samples
1. Copy the decompressed LOOPMASTERS SAMPLE PACK to the unit’s directory
/PIONEER DJ SAMPLER/Samples
If the “Samples” folder does not exist, please create the required folders using your computer’s folder creation
feature.
<Windows OS example> <Mac OS example>
2. When copying is done, disconnect safely from your computer and exit USB MASS STORAGE MODE.
3. Navigate to HOME > TRACK MENU > BROWSE and set the FILTER TYPE to FOLDER. Open the folder Samples
[INTERNAL] and check if LOOPMASTERS SAMPLE PACK has been copied successfully.
・ When the unit’s internal flash memory is full the samples might not transfer correctly. Relocate or backup other
samples to your computer in order to free up memory.